Bought 1 a year ago, used on 4 big driveway cleans. Handle blew apart and started leaking water. My machine was calibrated to accommodate the surface cleaner so not sure what happened . Shit cleaner tbh . Way better out there . Cheaper isn’t always good
Hey mate. I bought the 20" version. I have a 15.1lpm 4200psi machine. I cleaned a pebblecrete driveway yesterday but it was so slow. I am thinking maybe I need different nozzles but I can't find any info on the nozzles that come with it.
@@7Tix_JohnnyHart Hello again mate. I am still struggling to find the nozzle sizes on this sc. I noticed on Sydney tools it says 1.5mm 25 Nozzles but that doesnt help. Is at a 15025 nozzle or a 25015. I can't find anywhere to actually contact super hydro themselves to ask.
I cannot see any stamps on the nozzles and the manual doesn't specify. You are running a 15l machine so if you go to 15o25 you have a 15 degree pattern and 2.5gpm flow per nozzle. So perhaps a bit too high for your machine depending on the pressure you run. The 25015 will give you a 25 degree pattern with a 1.5 gpm. So that is 1.5gpm x 3.8 us gallon x 2nozzles = 11.4 lpm. Which is probably where you want to be to keep the pressure up. The other one will give 20lpm so could drop you pressure. But remember that Bernoulli's equation says if you restrict flow you up pressure and vice-versa. Off course it could be metric where the 25 is lpm but that won't make sense cause then you are flowing 50lpm. Hope I have not confused the issue.
Thanks for the review mate, cheers
Bought 1 a year ago, used on 4 big driveway cleans. Handle blew apart and started leaking water. My machine was calibrated to accommodate the surface cleaner so not sure what happened . Shit cleaner tbh . Way better out there . Cheaper isn’t always good
Sorry to hear that. I have had mine for around 2 years and it is been out on hire many times. Still good.
Hey mate. I bought the 20" version. I have a 15.1lpm 4200psi machine. I cleaned a pebblecrete driveway yesterday but it was so slow. I am thinking maybe I need different nozzles but I can't find any info on the nozzles that come with it.
Water build up is often the issue. Water has to drain away. Even a few mm of water is bad.
@@7Tix_JohnnyHart Hello again mate. I am still struggling to find the nozzle sizes on this sc. I noticed on Sydney tools it says 1.5mm 25 Nozzles but that doesnt help. Is at a 15025 nozzle or a 25015. I can't find anywhere to actually contact super hydro themselves to ask.
I cannot see any stamps on the nozzles and the manual doesn't specify. You are running a 15l machine so if you go to 15o25 you have a 15 degree pattern and 2.5gpm flow per nozzle. So perhaps a bit too high for your machine depending on the pressure you run. The 25015 will give you a 25 degree pattern with a 1.5 gpm. So that is 1.5gpm x 3.8 us gallon x 2nozzles = 11.4 lpm. Which is probably where you want to be to keep the pressure up. The other one will give 20lpm so could drop you pressure. But remember that Bernoulli's equation says if you restrict flow you up pressure and vice-versa. Off course it could be metric where the 25 is lpm but that won't make sense cause then you are flowing 50lpm. Hope I have not confused the issue.