Hi there. I want to buy a 4D again, but my Mac doesn't work with the old drivers. Could you tell me if the commands are sent through the midi interface on the back? Thanks!
Hello, I want to thank you! Your Video motivated me, doing my own mapping, which wasn´t as hard as I expected. So I like to share my 2 deck mapping. which is more simple but more intuitive to me, because I build it on stock controller experiences. Maybe some one will like it too.
Hi, congratulations on the work you did.... on deck (A) I intend to add a time code mode (DVS) turntable. I modified on Traktor but it doesn't work. Can you help me? Thank you
Los drivers más actualizados para usar la xone 4d con mac son para Mojave que es anterior a Catalina. Yo tengo en mi macbook una partición con Mojave instalado para poder usar la xone 4d y luego tengo Catalina en otra partición también y va perfecto
Hello, I have a problem with my 4D.. I installed the driver and mapped the controller in Traktor and it works properly! the problem is that the day after, Traktor recognizes the 4d as audio device but the controls doesn't work. I already tried to re-install everything, but nothing.. any suggests?
Hi Yari, you're welcome! Maybe check: + tsi Midi in and Out should be enabled +Is your 4D on channel 1? The mapping is made for ch1. In my previous video walkthrough you can seen how to put the 4D on ch1 +Maybe check if the 4D is midi'ing with an app like +MidiMonitor or something simular. Also, in Trkator you can see a light light up when Traktor is receiving midi. +try another USB cable. Let me know how it worked out!
Hi, I know this unit is discontinued, but I would actually like to buy one. Can you recommend a reliable link or something where I can purchase this controller? Thanks
Hi, I really wouldn’t know man. Can’t help you with that. I’ve got a feeling these units have had their time. Driver wise and electronic wise. Maybe if your handy with electonics it would be a nice option. Or maybe you would be lucky with a unit which would last a few years. I don’t know. I bought 2x XDJ’s 700 and not looking back. Good luck!
I may be potentially selling mine if you really want one? I can't get it to connect to my system personally, but I'd rather someone got some use out of it
hi! I have a Problem with Windows 11, xone 4d and the new Traktor 3 - before i used it only with mac. The midi function works But only a few seconds and zehn traktor errors and quits. What setup do you use and do i have to do special Setting in windows 11?
Set the xone to channel as was instructed in the previous video, updated the traktor to 3.5.3, loaded the tsi, MiDi indicator is not flashing at all when touching the controls. any idea? - audio device set to xone - output routing to external - in controller manager / in-port / all device - out-port - all device. (there is no option for xone its either All Ports or Traktor Virtual Input or Output Any ideas guys? 🙃
Will this work for Traktor 3.6?? Anyone ever try incorporating a TR-8S and/or TD-3 into their Traktor/4D set-up?? Just looking to find out if i'm correctly set up... I've the Macbook Pro connected to the Xone via USB... MIDI out from Xone into TR-8S and out again from TR-8S into the TD-3... BMP/MIDI display on Xone is set to off... The Traktor clock is very unstable...
Hi there! I've been gifted my father's old Xone 4D but i've had no luck connecting it to my win10 PC so far, and last I checked, support for it had completely dried up. Could anyone shed some light? Many thanks
thank you for the mapping files, everything works only with play/cue and the sync buttons light is on when the function is turned off. Why ? I did everything according to the video. Thank you 🙂
Heej DJ Richi, Maybe you could try to click with the mouse pointer on the play button and see if it starts playing and activates the play lights also? Or go into the .tsi, look up the midi out for the play buttons and tick the 'invert' button? Good luck!
@@djrichie Heej, oh, than you should put the mixer in Traktor mode! Check this video: ua-cam.com/video/0MIEggqqQd4/v-deo.html In the beginning it tells you how to set the channel and how to put it in Traktor mode 👍
Hallo! Let's do this in English so everybody can read along ;) I'm tempted to buy one of these second hand. I'm switching back (from rekordbox) to traktor, wanting a controller/mixer with 4 channels. Of course the Traktor Control S4 MK3 comes to mind, which seems to be more streamlined than the Xone 4D. But there are so many options with the 4D!. Do you think using this only with traktor is a good way to go? Not missing bigger jogwheels for example? Every UA-cam vid I come across people mix techno with it, but I tend to DJ at party's with a wide range of genres (and older funk/disco songs as well) So good beatmatching is a must! Nice video's by the way, keep it up!
Hey Jakob! Well, I'm going to be very honest. I was completely fed up with doing gigs and being dependent on a laptop. It happened that Traktor would quit/crap out like 'Traktor quit unexpectedly' a week before a gig. That gave me stress, along with the stress of gigging. So I sold a lot of old stuff in order to be able to buy 2x XDJ 700's and a mixer. So, the 4D was always stable on me, it never let me down. But the software side din't work out the way I wanted. I'm super happy with the XDJ's. I love the 'directness' of controlling things. No latency, clear layout etc. I realize that this is not a direct answer to your question, but I guess you get a feel of what direction I'm pointing in :-) Good luck deciding!
Page Not Found
The page you are looking for doesn't exist or has been moved.
Hi there. I want to buy a 4D again, but my Mac doesn't work with the old drivers. Could you tell me if the commands are sent through the midi interface on the back?
Thanks!
Hello, I want to thank you!
Your Video motivated me, doing my own mapping, which wasn´t as hard as I expected.
So I like to share my 2 deck mapping. which is more simple but more intuitive to me,
because I build it on stock controller experiences.
Maybe some one will like it too.
ua-cam.com/video/us_HWMoQoh4/v-deo.html
Do u have the mapping available for download? :)
Hi
traktor pro 4 mapping comming soon?
AWSOME! THX MAN
Thanks for your comment! Great to hear 💖
Hi, congratulations on the work you did....
on deck (A) I intend to add a time code mode (DVS) turntable.
I modified on Traktor but it doesn't work.
Can you help me?
Thank you
Hola, con que versión de Macos la usas? Vale para Catalina? Gracias
Los drivers más actualizados para usar la xone 4d con mac son para Mojave que es anterior a Catalina.
Yo tengo en mi macbook una partición con Mojave instalado para poder usar la xone 4d y luego tengo Catalina en otra partición también y va perfecto
Hello, I have a problem with my 4D.. I installed the driver and mapped the controller in Traktor and it works properly! the problem is that the day after, Traktor recognizes the 4d as audio device but the controls doesn't work. I already tried to re-install everything, but nothing.. any suggests?
Hi Yari, you're welcome! Maybe check:
+ tsi Midi in and Out should be enabled
+Is your 4D on channel 1? The mapping is made for ch1. In my previous video walkthrough you can seen how to put the 4D on ch1
+Maybe check if the 4D is midi'ing with an app like +MidiMonitor or something simular. Also, in Trkator you can see a light light up when Traktor is receiving midi.
+try another USB cable.
Let me know how it worked out!
@@TheSubziMr unfortunately nothing works.. Traktor is not receiving midi, and tried also on Ableton. Same result
@@MrCompressor58 maybe reinstall driver?
@@TheSubziMr already tried it several times.. I don't know what else to try
@@MrCompressor58 As a final resort, drop your question in the Facebook group ‘Allen&Heath Xone 4D’?
Good luck!
Tienes el maping ?
Hi, I know this unit is discontinued, but I would actually like to buy one. Can you recommend a reliable link or something where I can purchase this controller? Thanks
Hi, I really wouldn’t know man. Can’t help you with that. I’ve got a feeling these units have had their time. Driver wise and electronic wise. Maybe if your handy with electonics it would be a nice option. Or maybe you would be lucky with a unit which would last a few years. I don’t know. I bought 2x XDJ’s 700 and not looking back. Good luck!
I may be potentially selling mine if you really want one? I can't get it to connect to my system personally, but I'd rather someone got some use out of it
Hola !! seria posible que publicaras o me mandaras el tsi para xone 4d traktor 3.5 ?
Los enlaces ya no funcionan .. gracias por adelantado!
hi! I have a Problem with Windows 11, xone 4d and the new Traktor 3 - before i used it only with mac.
The midi function works But only a few seconds and zehn traktor errors and quits.
What setup do you use and do i have to do special Setting in windows 11?
Hi Dennis, sorry to hear things aren't working together. I don't have any tips for you. Maybe drop your question at the fb group of the 4D. Good luck!
Thanks! But you use win 11 as well?
@@dennisfeldmann2660 No, I don't use windows... Good luck!
Set the xone to channel as was instructed in the previous video, updated the traktor to 3.5.3, loaded the tsi, MiDi indicator is not flashing at all when touching the controls.
any idea?
- audio device set to xone
- output routing to external
- in controller manager / in-port / all device - out-port - all device.
(there is no option for xone its either All Ports or Traktor Virtual Input or Output
Any ideas guys? 🙃
Will this work for Traktor 3.6?? Anyone ever try incorporating a TR-8S and/or TD-3 into their Traktor/4D set-up?? Just looking to find out if i'm correctly set up... I've the Macbook Pro connected to the Xone via USB... MIDI out from Xone into TR-8S and out again from TR-8S into the TD-3... BMP/MIDI display on Xone is set to off... The Traktor clock is very unstable...
Hi there!
I've been gifted my father's old Xone 4D but i've had no luck connecting it to my win10 PC so far, and last I checked, support for it had completely dried up. Could anyone shed some light? Many thanks
Nice you were gifted the xone. I wouldn't know what to do, maybe you could try the Facebook group Xone 4d. Maybe they have an answer. Good luck!
Wanneer traktor AI stem seperation uitbrengt gaan deze zwaar omhoog in prijs
thank you for the mapping files, everything works only with play/cue and the sync buttons light is on when the function is turned off. Why ? I did everything according to the video. Thank you 🙂
Heej DJ Richi, Maybe you could try to click with the mouse pointer on the play button and see if it starts playing and activates the play lights also?
Or go into the .tsi, look up the midi out for the play buttons and tick the 'invert' button? Good luck!
@@TheSubziMr thank you, I tried but it doesn't work as you write. the problem is probably that when the mixer is turned on, all the red LEDs light up
@@djrichie Heej, oh, than you should put the mixer in Traktor mode! Check this video: ua-cam.com/video/0MIEggqqQd4/v-deo.html
In the beginning it tells you how to set the channel and how to put it in Traktor mode 👍
Hallo! Let's do this in English so everybody can read along ;) I'm tempted to buy one of these second hand. I'm switching back (from rekordbox) to traktor, wanting a controller/mixer with 4 channels. Of course the Traktor Control S4 MK3 comes to mind, which seems to be more streamlined than the Xone 4D. But there are so many options with the 4D!. Do you think using this only with traktor is a good way to go? Not missing bigger jogwheels for example? Every UA-cam vid I come across people mix techno with it, but I tend to DJ at party's with a wide range of genres (and older funk/disco songs as well) So good beatmatching is a must! Nice video's by the way, keep it up!
Hey Jakob! Well, I'm going to be very honest. I was completely fed up with doing gigs and being dependent on a laptop. It happened that Traktor would quit/crap out like 'Traktor quit unexpectedly' a week before a gig. That gave me stress, along with the stress of gigging. So I sold a lot of old stuff in order to be able to buy 2x XDJ 700's and a mixer.
So, the 4D was always stable on me, it never let me down. But the software side din't work out the way I wanted.
I'm super happy with the XDJ's. I love the 'directness' of controlling things. No latency, clear layout etc.
I realize that this is not a direct answer to your question, but I guess you get a feel of what direction I'm pointing in :-) Good luck deciding!