super thanks !! I just acquired a 4D and was searching for surch.a good mapping; I'm now looking at trying to combine your map with some custom mapping linked to Ableton Live in //
A lot of thank's. Is is running really fine here. Please...could you post a photo of your input / output traktor setup? What firmware are you using on your 4d? Thank's a lot.
Hi Mario, sad to hear that your 4D isn't working as it should. I think the best stable combo is OSX Mountain Lion with Traktor 2.6.8. The later updates gave me some connecting troubles as well. most times resetting and/or removing USB and replugging USB did the trick. Maybe drop your question in the 4D Facebook group, maybe they can help? Good luck!
Hi Deef, I really don't know. You could check the manual of both the 3D and the 4D and see if the cc commands of the 3D are the same as the 4D. Or you could just give it a try, see if it works. Good luck!
@@TheSubziMr will try, but isn't it weird that they never even mention the XONE 3D anywhere. Not in traktor pro 3, really nowhere. My guess is that they should be the same. The biggest difference I could find between 3D and the 4D seem to be that I only have one line-in for the sound card part and the 4D has two. Well, on with the search for an answer is my guess. thanks anyway. ;)
@@TheTEKNOistSociety2024 Good luck! Mind that these units are getting quite uhm, dinosauric. Especially with the drivers for the audiocard. Good luck on your quest!
@@TheSubziMr yeah I know the mixer is getting pretty old but drivers of Xone 3D is still pretty good. Only the mappings are horrible, and that is my current quest. That and I am having a good friend help me to recap this mixer because it will work for another 20 years then. I have never had a mixer that is already this old and still mixing and sounding this good. And I have used a lot of (professional) mixers. I think that perhaps I am too attached to the damn thing. Hahaha. Anyway, thank you. Nice talking to you. ;)
Hi, has anyone problems with the last Mac driver v3.3.17_2 (April 2018). I cant upload it. I follow the instructions but the traktor doesn’t recognize the Allen and heat 4D. I’v bee few month without no mixing because of this issue. Thanks
Sorry, could you fix it? I have one 4d and a macbook pro 2019, and the latest drivers are not compatible! Are useful until mojave. The newest systems can´t run the latest driver
I'm not sure anymore, but I believe that High Sierra was most stable. After H.S. I moved to Mojave (I think) which also ran but connecting it was a bit more fiddly. I would go H.S., or Mountain Lion of the computer is old enough. Good luck!
Many thanks for the Mapping! Just a question. Because everything is working except the central part of the mixer where I have the Fader, the bass mid, etc.. of each channel. Do you know if I did somenthing wirng?
Hi, thanks for your comment! I am not sure if I understand your question, but it sounds like you didn't set up your audio channels. The mapping is only for the midi part. So I would check the settings and go to audio setup and also do the output routing. Good luck!
Hi Reginald, Kind of you you ask me to make a video on how to map in Traktor. I personally think that there are a lot of video's out there that show how to map in Traktor, so I'll put my precious time in something elso... :-)
Hi, strange that the tempo faders won't work. But it's quite easy to fix. In preferences go to the 4d controller and find the tempo fader. Click 'learn' and move the according fader. Good luck!
@@TheSubziMr i guess it was a glitch i even mapped to one fader on ableton and it was jumping up and down i used for quite a long time after years and i had other mappings on my traktor f1 . but now for some reason after a day it works fine and now it all works fine . great mapping big ups to you !
@@TheSubziMr thanks for replying friend. just wanted to know there is only one ground point in the 4d mixer can i connect two ground cables from two turntables to it ??
Thrillokh tilak hi, so, there is one point for grounding. You can stack multiple ‘forks’ (multiple turntables) on the ground pin and clamp them with the nut.
buying a Xone 4D and cant wait to try your maps, looks really awesome! thank you very much for sharing and explaining everything
i also have 2 x allen & heath k2 controllers with xone 4d mixer, anyway i can expand to use all of them?
Thank you 9PM! Good luck and have fun with your 4D!
i buy a 4d now. i cant wait to try your maps too. look very good for me. BIG THX
super thanks !! I just acquired a 4D and was searching for surch.a good mapping; I'm now looking at trying to combine your map with some custom mapping linked to Ableton Live in //
Good luck with the mapping!
great work bro, thanks for existing and making this amazing video!
Hey! Thanks for the super nice comment 💖. Cheers!
Thank you for the great mapping :)
Hi Felix! Thanx for taking the time to thank me! :-) Really appriciate it 👍
I realize Im pretty off topic but does anybody know of a good place to stream newly released tv shows online ?
A lot of thank's.
Is is running really fine here.
Please...could you post a photo of your input / output traktor setup?
What firmware are you using on your 4d?
Thank's a lot.
ey bro! Do ypu have a new version of this mapping? Thx!
Haha, I only have the 2.6.8 and 2.11 versions. I'm still on osx Dino (ML). But maybe start editing the tsi yourself? You can do it! 💪
Hi... All at the sudden i lost connectivity between mixer and traktor, and when i readded tsi still not working 😢.. any advice subzimr?
Hi Mario, sad to hear that your 4D isn't working as it should. I think the best stable combo is OSX Mountain Lion with Traktor 2.6.8. The later updates gave me some connecting troubles as well. most times resetting and/or removing USB and replugging USB did the trick.
Maybe drop your question in the 4D Facebook group, maybe they can help? Good luck!
@@TheSubziMrthank you. I imported the wrong tsi so now its working
i am wondering. i own a X:ONE 3D? Are thesde mappings the same? And if not, do you know what i would have to change in the mapping?
Hi Deef, I really don't know. You could check the manual of both the 3D and the 4D and see if the cc commands of the 3D are the same as the 4D. Or you could just give it a try, see if it works. Good luck!
@@TheSubziMr will try, but isn't it weird that they never even mention the XONE 3D anywhere. Not in traktor pro 3, really nowhere. My guess is that they should be the same. The biggest difference I could find between 3D and the 4D seem to be that I only have one line-in for the sound card part and the 4D has two. Well, on with the search for an answer is my guess.
thanks anyway. ;)
@@TheTEKNOistSociety2024 Good luck! Mind that these units are getting quite uhm, dinosauric. Especially with the drivers for the audiocard. Good luck on your quest!
@@TheSubziMr yeah I know the mixer is getting pretty old but drivers of Xone 3D is still pretty good. Only the mappings are horrible, and that is my current quest. That and I am having a good friend help me to recap this mixer because it will work for another 20 years then. I have never had a mixer that is already this old and still mixing and sounding this good. And I have used a lot of (professional) mixers.
I think that perhaps I am too attached to the damn thing. Hahaha. Anyway, thank you. Nice talking to you. ;)
Hi, has anyone problems with the last Mac driver v3.3.17_2 (April 2018). I cant upload it. I follow the instructions but the traktor doesn’t recognize the Allen and heat 4D. I’v bee few month without no mixing because of this issue. Thanks
May it be a problem on the soundcard? It happened to me
Sorry, could you fix it? I have one 4d and a macbook pro 2019, and the latest drivers are not compatible! Are useful until mojave. The newest systems can´t run the latest driver
What version of macOS are you running the Xone and traktor?
I'm not sure anymore, but I believe that High Sierra was most stable. After H.S. I moved to Mojave (I think) which also ran but connecting it was a bit more fiddly. I would go H.S., or Mountain Lion of the computer is old enough. Good luck!
Thank you! I’ll give it a try 🤩
I'm looking for my XONE 4D for a good mapping for my traktor 2.11
unfortunately I have tried several previous versions and they do not workTHANKS
Many thanks for the Mapping! Just a question. Because everything is working except the central part of the mixer where I have the Fader, the bass mid, etc.. of each channel. Do you know if I did somenthing wirng?
Hi, thanks for your comment! I am not sure if I understand your question, but it sounds like you didn't set up your audio channels. The mapping is only for the midi part.
So I would check the settings and go to audio setup and also do the output routing. Good luck!
I have same problem here. Did you fix it
Can you do a video on how you map in Traktor
Hi Reginald,
Kind of you you ask me to make a video on how to map in Traktor. I personally think that there are a lot of video's out there that show how to map in Traktor, so I'll put my precious time in something elso... :-)
@@TheSubziMr hello my friend, could you made new map for pro 3🥺
Hi guys
Any idea how to connect and control chanels C and D with traktor kontrol x1 on my xone 4d?@thesubziMr
everything works great but tempo faders for deck A and C seem to not work well ! what shud i do to fix this?
Hi, strange that the tempo faders won't work. But it's quite easy to fix. In preferences go to the 4d controller and find the tempo fader. Click 'learn' and move the according fader. Good luck!
@@TheSubziMr i guess it was a glitch i even mapped to one fader on ableton and it was jumping up and down i used for quite a long time after years and i had other mappings on my traktor f1 . but now for some reason after a day it works fine and now it all works fine . great mapping big ups to you !
Thrillokh tilak haha, weird. But good to hear it works! Thanks for the update! 👍
my in/out ports does not offer the xone 4d option??? Do you have any suggestion why that is??
Weird. Did you try to swap your USB cable?
No but usb cable is brand new. I'm using Windows 10 and update firmware properly so I may be in way over my head. Thanks for you reply!
Firmware didn't update properly*
Hmm, maybe try to contact your A&H dealer?
I was just able to update now....weird. Thanks again for your reply and I'll try this process again.
Where do I get the .tsi file?
DJSoulfeggio
Hi, you can get it at the djtechtools website. Beware to download the correct version. Good luck!
Have you tried using it for time code dvs?
Yes, works fine!
@@TheSubziMr thanks for replying friend. just wanted to know there is only one ground point in the 4d mixer can i connect two ground cables from two turntables to it ??
Thrillokh tilak hi, so, there is one point for grounding. You can stack multiple ‘forks’ (multiple turntables) on the ground pin and clamp them with the nut.
TheSubziMr thank you did that 👍👍✌️
toppen!!
Thanks
Hi can i have a copy of the tsi file
Hi, go to the djtechtools.com website to 'mappings', Traktor, Xone 4D, choose 'Subzi'. It's in the discription. Good luck!
HOI HOI is het correct als ik zeg dat ik denk dat jij een nederlands bent. zo ja dan wordt het communiceren wat eenvoudiger. klopt dat ?
Yes indeed! Heeft mn accent me toch weer verraden... :-)
How to download it?
Hi, go to the djtechtools.com website to 'mappings', Traktor, Xone 4D, choose 'Subzi'. It's in the discription. Good luck!
Looks great but to sdvanced for me
TRAKTOR PRO 3 Please Tks
Hi, go to the djtechtools.com website to 'mappings', Traktor, Xone 4D, choose 'Subzi'. It's in the discription. Good luck!
@@TheSubziMr Does this file works with Traktor Pro 3 to?
@@daniel-dl1ps Sorry for the late reply! 😅. Did you test it with TP3? Looking forewards to your reply!
А есть на русском, а то нихуя не понимаю
for once use 4 cdj player for crying out loud
Thank you for taking your time to watch my video, placing a comment and also giving a suggestion on what equipment I could use.