*NEW* MJX HYPER GO 1/14 BASHER 14210
Вставка
- Опубліковано 17 чер 2023
- In this video we unbox, test, and review the newest release from MJX Hyper Go. The 14210!!! It uses the same chassis from the MJX 14301/14302. The 14210 comes with a bigger brushless motor (4400kv), bigger shocks, upgraded metal drive train, and bigger wheels. It comes with a lot of extra parts in the box to keep you up and running. All for an amazing price.
I put this rig through a solid bashing and then lay down a few speed runs to finish it up. I took it to one of my favorite bashing hills and trying to find that perfect flip off the edge. How does it handle the bash session? How fast does it go? You will have to tune in to find out. It's time to Bash, Crawl, Repeat!
MJX Hyper Go 14210 Brushless 1/14 RC Car 2.4G Remote Control 4WD Off-road Racing High Speed Electric Hobby Toy Truck
Features:
1. All-metal hydraulic shock absorber;
2. Standard 2S battery 55km/h,Support 3S battery,max speed upto 80km/h
3. 45A independent brushless ESC + 2852 4400KV four-pole brushless motor;
4. Metal anti-collision head;
5. All-metal transmission system (metal gear differential);
6. Standard independent receiver, easy to modify. "
Basic parameters :
Product model No.: 14209 14210
Scale: 1/14
Maximum speed: 80km/h
Remote control distance: 120m
Maximum use time: 15min
Charging time: 4h (using 5V 2A charger)
Charging method:USB charging cable
Dimensions and Specifications:
14209:
Product size (mm) 320*210*140
Wheelbase (mm) 177mm
Wheel base (mm) 198mm
Tire diameter (mm) 75mm
Vehicle weight 1490g
14210:
Product size (mm) 320*230*124mm
Wheelbase (mm) 188mm
Wheel base (mm) 198mm
Tire diameter (mm) 90mm
Vehicle weight 1410g
Configure:
Motor Specifications: Brushless Motor 2852 4400KV 4 Poles
Motor cooling aluminum heat sink + fan
ESC 45A brushless ESC (metal heat sink)
Servo specification 19g digital servo
Remote control 2.4GHz
Remote control battery 1.5AA*2
Car Battery Specifications 7.4V 3000mAh 2S 25C
packing list:
Car
Remote control
battery
rear wing
Manual
USB charging cable
Hexagon wrench
Head-up wheel accessories
Screwdriver
Tires
MJX HYPER GO 14210
www.aliexpress.us/item/325680...
AMAZON Body Clips
www.amazon.com/gp/product/B0B...
OVONIC 3S Battery
www.amazon.com/gp/product/B08... - Авто та транспорт
I make body clip retainers on all my cars, except for Arrma's + few others that already come with the rubber retainers. I simply tie a piece of fishing line on the clip, then pass the fishing line through a small hole I make in the body. Finish by tying a couple of knots in the end of the line inside the body to stop the line pulling out. I now never loose body clips anymore.
Great idea. My other hobby is fishing, so I have plenty lying around. I did put a link into the description for the rubber pull tab retainers.
Im a new subscriber. I really enjoyed you bringing the latest from MJX. You are a youtube first for this model. At least in the U.S. IF I COULD SUGGEST ... try getting a flexible camera/phone holder so you can wrap it around the base of the transmitter and give a better angle and perspective for your videos 😉. Thanks for your dedication and cool content 😎. 👍
Great idea. Thanks for the feedback. I have all kinds of cameras and mounts. But I don't have one of those. Thanks for the constructive advice. Bash, Crawl, Repeat!
Nice video! I just did mine on this car and omg this car punches way above its weight. Really one of the most impressive budget rc cars I've ever driven. Actually in some ways it's one of the most impressive rc cars you can get below 250 dollars in many ways as well even if you included premium name brands.
💯 I am blown away by MJX. Budget price for top brand quality. If they end up making a 10th scale rig its goint to be a game changer. They dominate the 14th and 16th scale basher, IMO.
I have the 14301 and H16PL(their new buggy) and the wing has same issue where you need washers on those tiny screws, easy fix though. No wheelie bar came with it which seems crazy but they did switch to the velcro battery tray which made it easy to run a Zeee 3s 2200. Seems like they really listen to feedback while keeping the pricing fair.
Thanks its works great
Insanly fast for a 14th scale awesome car
Right. I have a video on the new H14BM coming soon.
Wow... spettacolare...bel video ...il modello è molto racing ... complimenti... ciao dall'Italia
Thanks
Could you explain in more detail what I should do with these elements from the 9:25 of the video?. I already got mine 14210 and its my first real RC car
Hey! About the CVD issue, if you look in the manual and on teh parts number on the shocks you can see that there are 2 different lengths for front and read shocks and that the long ones are supposed to go on the front and the short ones on the back. Tho some people have received their truggys with long shocks both front and rear. But it seems that for most of them the easies fix is to swap the shock to their intended locations.
Nice catch. Either way, I feel like it allows too much travel. I was jumping mine today with the spacers in and didn't have any problems. Very Odd they would have the shocks mixed up. Gen 1 usually have a few kinks in them. Mine is running like a champ now. Thanks for the info.
So, how and where exactly do those 4mm cut tube pieces go? Could you post a pic? Thanks
@donalddelgado1666 inside the rear shock. But that was for the V1 only. Most of the new MJXs have been upgraded.
Thanks for the video. Made an order can't wait for it. Can you maybe make a video how you did the upgrade with the rear suspension. Yet I'm a noob in this things.
Awesome. Thanks. I can walk you through the processes. Let me know when you get yours.
@@hyperc5249 You are the best 🤩. Mine is still in pre order ordered from banggood.
Is there an upgrade for the h14BM?
Eu gostaria de ver a comparação dele com o MJX 16210. Lado a lado.
Bigger/thicker 1/10 scale body clips worked for me on this rig and the 16th scale MJX rigs
I noticed that. They look bulky tho.
@@hyperc5249 No they dont they look like regular body clips
Appreciate the review. Do the 14 scale wheels come with foam?
Thanks. Yes, they do.
Really good and informative video! Did you notice any throttle delay or that the car breakes hard when you release the throttle? Also what runtime did you get?
Yes, there is a tiny bit of throttle delay. But on a basher, that is fine. No breaking when throttle released. Around 20+ minutes.
Have you tried the e revo 1/16? I have it and wonder if the mjx is more durable and what’s the difference in driving? I hate to work in my e revo and feels like I have to do a lot of upgrades to make it durable and I’ve broken the from bulkheads on both
No I don't have the basher. I haven't heard food things about it.
Wicked vid bro - my kids asked me to get them a 4s lipo ! Can u run them on 4s with out blowing it all ?
No. The ESC and motor can't handle the voltage. 3S is super fast.
@@hyperc5249 thank you I couldn’t find it anywhere but was pretty sure it would mess it it thank you
Hi, When you said about the 4mm of Nitro tubing, can you confirm you mean inside the damper? I usually put about 4mm on the shock rod to stop it bottoming out, so do you mean to stop it topping out?...I'm just getting back into RC after a break of about 30yrs so am trying hard to get my head around the physics of everything 🤔
The V2 has new telescoping cvds. So they don't pop out. You don't need to do this upgrade anymore.
Cool...thank you 😁 Would you rate the 14210 over the 14210...I'm just about to pull the trigger but can't make up my mind@@hyperc5249
I thought it was the V3 that has the telescoping ones.
I'm interested in this or the 16th scale hyper go. If you could only pick one which would it be and why? Thanks!
I would definitely go with one of the 14th scale rigs. Bigger, faster, better materials, and more durable. I am extremely impressed with MJX. Hobby grade RCs for this price are usually toys. The H14MK is a great street basher. I would definitely go with the 14210 or 14209 if you want to do offroad bashing. 210 for Jumps 209 for dirt racing.
If you go 1/16th scale they are strong also..good nylon chassis with honeycomb plus all metal gears..Get the buggy or truggy with the 3s battery stock..Ali has them for around $100ish
Hiya! Are you able to tell if the 14210 shares some of the same steering and suspension parts as the smaller 1:16 MJX Hyper Go? I'm interested in upgrading as much of the suspension and steering parts to metal but they don't do them for the 14210 yet... Are the front CVD's and upper and lower suspension arms the same length?
The 16th scale doesn't share the same suspension arms. The CVDs have different part numbers, but as far as i can tell, they are the same as the 14th scale. I don't use metal suspension arms because I like to have a little flex in them.
Thanks for that, i think the only difference in the upper and lower suspension arms is how the shock mounts, it has reinforcement on the 14210, are they the same length?
The steering and suspension is so sloppy on the 14210, it needs revising, and the turning circle is terrible.
@harleystunt They are not the same length. The wide tires don't help the stearing or radius. Look for some upgraded tires to help that out. MJX has a huge selection to choose from.
My 14210 came 2 days ago, agreed about the washers for the wing.
I haven't had any rear axle problems yet.
solid RC from MJX. I hope parts hit ali soon.
Thanks for the review!
Awesome. MJX is a force to recon with. I can't wait for the parts to become available. I have some big plans. Keep an eye on those rear cvds. I was bashing pretty hard when they slipped out.
@@hyperc5249 The 16207 made a believer out of me, I have absolutely thrashed on that buggy and it's held up remarkedly well. I did strip a spur gear but if you order the one for the 14XXX models it's the same spur gear but upgraded.
Here is a list of matching parts from my 16207 and 14210 manuals:
16230 steering block
16260 Rear Hubs
16392b Motor Pinion
16395c motor heat sink
wing is the same, but the 14 mount is a little different, sticks up more.
Happy bashing!
what do you mean with washers?
@@juliendurnez8875 Bolt, nut, and washer. A washer is a flat round piece of metal with a hole in the middle.
@@juliendurnez8875 Take the screws out of the wing and find some small washers that fit inside the holes with the screw and then put the wing back on.
It helps hold the wing on the mount if you land wrong.
Hey man cool video are the extra springs better/stronger than the stock?
Thanks. The silver are a stiffer spring rate. I actually tuned mine in with a different oil and the shock adjustment on the factory springs. If you are going to the moon, then I would swap them out.
I would like to buy a hyper go but I can't decide which one. I have a parking lot with gravel and tarmac basketball court etc. I would be more on the 14301 black Mamba side (instead 14210) but I don't know if the ground clearance is enough. Any thoughts on this?
The 14209 would be better for that terrain. There are no issues with it at all. Super fun rig. It sits right between the 14301 and 14210 in ride height and performance.
@@hyperc5249 Thx, not so sexy like the 14301 but ok. looks like that the 209 is also the most expensive variant on Ali
Nice video I just order this car and should be delivered in 2 weeks can you give me afavour and tel me what size of philips screw drivers I need to buy? PH0, 1 or 2 you mention to buy descent one and I want to be prepered
2
Which size/brand fuel line did you use so i can go ahead and order it? Thanks!
3mm
Good video man
I need yor recommedation
I think betwen HyperGo 14210 vs Hbx 2996 1/12
What u think?
Or recommend me some strong and durable rc 4x4 under 200$
Tnx man
H14BM is the best. It is the V3 of the 14210. Or if you don't have Amazon. The 14210 V2. I like the 2997a, but MJX is awesome.
Great car,but I can not find spare parts for this on the net,will they release parts later on?Because even if its a good car without replacment parts.... then its useless,Thanks for they great review+++++++++++++++++++Subscribed+++
Thanks!!! A lot of parts are used on the 14210 are also on their other cars. A arms, drive shafts, etc. I expect the spares to be available in the next few weeks.
Im new to RC cars. My only concern about this RC is that the front right tyre keeps on hitting the cable inside whenever i make a turn… Any tips on how to fix this?
I am not sure what cable you are referring to? Battery cable?
@@hyperc5249 yea the battery cable
@Jxtian013 take the cable and push it under the velcro strap to hold it in place. Or flip the battery around. Just don't let the wire sit on the drive shaft.
Hey dude, awesome review! Nice work. I just ordered mine, always wanted a fast rc car and this one just seems good to start with. I also want to order an extra battery, the car i ordered comes with an 3s lipo. How do i know wich battery i can order? I have to look at connection etc. And i am not familiar with rc cars. Can you help me? Thanks a lot
Absolutely. So every esc and battery have different connections. The MJX has deans "T" style connections. You also have to look at the rating the ESC and motor can handle. 2S 3S ect. The S stands for cells. A 1 cell has 1 battery cell 2 has 2 cells. If you put to large of a battery on, it will burn up the electronics. This rig is rated up to 3S. Being new to the hobby, I would go with 2S to start. Lipo batteries can be VERY dangerous. I don't like the USB chargers. If lipo batteries are not properly charged and storage charge, they can and will catch fire. I recommend a hobby grade charge. Don't discharge a lipo to 0. 3.8 is the common storage charge. UA-cam lipo batteries and become knowledgeable about them.
@@hyperc5249thanks dude! I have watched some videos just now, i am not sure what charger to buy. And is every charger universal? Because the battery i need has a dean plug. Does it matter what charger i buy?
Chargers come with different sets of cables that have the connectors on the end. Generally, the popular style connectors. Deans are very popular. I prefer Protek chargers. You can find decent ones on amazon. I'm not sure what your budget is. Don't buy the cheapest one you can find. Check the reviews and order away. A good lipo bag is also needed to store them in.
Thanks for the help! I am actualy looking to buy a 2s lipo. Cab you measure the dimensions of the battery please? I can't find them anywhere
@joranedens6822 7/8 X 1 5/16 X 3 3/4 Inched or 23 X 34 X 95 mm.
Hi, great informative video!
Will your recommended 3s battery in the description also fit the 14209 car?? This way it's a 2pack I get one and the wife gets one. We will have the 14210 and 14209 soon
Thanks!!
Yes, the battery fits both rigs. You will have a hard time deciding who gets which rig. They are both awesome and have different abilities.
Thanks for sharing the vid. I tried swapping for a flysky receiver, but top speed is lower and reverse no longer works consistently.
Any idea how to calibrate?
Did you swap the transmitter and receiver?
@@hyperc5249 yes. New receiver and gt3c transmitter. Tried adjusting end points and trim, but it simply wouldnt reverse more than half the time.
@johnallenit That sounds like the transmitter. Have you bound it to another rig and tried it? Different receiver?
What’s the measurements for the battery tray?
I want to put the shell of 14209 onto the 14210, will this work?🤔
You will have to buy the new front and rear bodybpost mounts. New front and rear bumpers. Then, the body itself. You are better off just buying the 14209. The cost would be close to half the cost of the car just for the body and mounts.
@hyperc5249 thats true, but i liked the 14210 because it goes faster lol but prefer the 14209 body 🥴🤦♂️
Do I need a reinforced gear upgrade?
I'm still running mine stock. When they break. I will upgrade them.
They are still running strong. So I wouldn't replace them until they do.
I thought this rig has telescopic shafts ? And not cvds in the rear??
They are telescoping CVDs. Super nice and heavy duty.
About when is the 14210 release in America? Any news about USA market release date?
IDK. I can't believe they haven't got it up on Amazon yet. These things are amazing. Considering Arrma just jumped into the mini basher market. MJX is way ahead of them.
@@hyperc5249 i suck it up and decided to order one from China lol
What weight shock oil are in the shock
S
I'm guessing 30. I went to 50 and it works like a charm.
@@hyperc5249 I put 60 how the best way to feel them up with shaft in / out or half way
@@joevozzo1 out. Then up when topping them off.
Is it possible to add a gyroscope?
Yes, MJX has one you can add. Or swap the ESC with a flysky or Radiolink.
thanks for the quick response, love the videos by the way! @@hyperc5249
Does the car flip easy?
I'm not sure if you are asking when you ramp it or just ripping around? Trying to flip it on a ramp on purpose is easy. When ripping it around, the rig sticks to the ground. I hope that helps with your question.
Why does no one talk about runtime with supplied battery or transmitter distance?
I did on the 14209. You get 20ish minutes of run time. I also never ran out of distance on either of these rigs. Good question. I will be sure to comment on that moving forward. Thanks.
@@hyperc5249
Ah ok I didn’t see that video..Thanks for the reply!
Center diff?
No center diff. Rear pinion gear.
I purchased the same car. I wonder if somebody know if the charger that comes with the car are good to begin with or is it really really trash?
I do recommend getting a hobbie grade charge if you really like the hobby. Not storage charging your battery can be a safety issue.
I have the H16BM that comes with the same charger. It's pretty junk but it works fine. A proper lipo charger is always a good investment though.
Is it waterproof?
Yes it is.
What size is the wheel hex
7mm
@@hyperc5249 thanks
2.5mm chassi. Is it steel??
It's so heavy!
I have it in my hand, but I have not yet tried to drive it.
We have snow here anyway so I can't really damage it, even it small cars like this are ONLY meant for dunes. Speedruns get old fast.
It is an Aluminum chassis. All metal drive train and aluminum shocks add some weight.
@hyperc5249 I suppose. I bought it because of the drive-train as that is the only thing I wear out on my cars, after 20 years of daily nitro you know I'm careful lol, but did not expect such a weight on drive-train alone in such a small car.
I am impressed by it. Just gave it a living room run, the radio SUCKS but the car is angry. I like it but it's going on a shelf.
Yeah, the TX RX is just OK. But for this price, the rig is worth that much alone. The H14MK is awesome too. Super fun street basher.
@hyperc5249 I agree. It's a very unique car and looks alot like my 8sKraton but so so so much smaller. Did you break any parts yet? My friends have a habit of crashing my cars pfff
@@TheSphongleface no. And I have thrashed them.
Where can I buy this?
Aliexpress. Only.place you can find them
@@hyperc5249 is Aliexpress a scams tho
@@Ebk371 No. Not at all. I have ordered lots of stuff. Just make sure you are ordering from an RC store.
@@Ebk371order from banggood
wltoys 124007 or this ...hmm...durability is a good feature
MJX is where it's at. WLtoys make good R/Cs. MJX makes great R/C. Awesome little basher.
@@hyperc5249 14210 went to order:)
What compatible batteries can I use?
2S or 3S lipo with deans T style lipos.
@@hyperc5249 do you have a particular one? like a certain type that would fit into the current battery tray? Like the one that you used?
@user-cb8sn5pl4t OVONIC 3s Lipo Battery 35C (Burst 70C) 2200mAh 11.1V Lipo Battery with Dean-Style T Connector for Airplane RC Quadcopter Helicopter FPV Drone(2 Packs) a.co/d/2AU9Z5q
thanks@@hyperc5249
It would be a great car if you could control it. Impossible control. Forget running a straight every turn youll flip. I have had two and now sending it back again.
Hmm. Mine drives just fine. Jumps, speed runs, and ripping.
Is this good from ali express
Yes. But you can get the upgraded V3 model on Amazon now. MJX HYPER GO H14BM.
Why such a big deal abt body clips. Use a paper clip n it stays solid
They copied proline tires trenchers. I have them on my 1/14 model.
They are awesome tires. MjX gives you so many extra parts and spares. Great for bashing.
@hyperc5249 mines otw. I also ordered all the metal upgrades and servo and all metal suspension parts kit as well for the 1/14 turns it into a way
Different beast.
Camera work 0
Yes. I am trying to reformat the bashing camera to live footage. Thanks for watching.
@@hyperc5249 a mount of the controller seems like a goto
@@alanrobinson6794 I'm working on one for my camera. Thanks.