I have a problem that hopefully someone knows how to fix. I had an inductrix. Worked fine. Upgraded motors and added camera. Then he problem occurred. The motors would cut out. Giving any throttle for more than 1 second would cause the flight controller leds to turn of and motors stop, then led comes back on again, but motors don't unless throttle is reset. Any ideas?
now I don't know much about motor speeds or anything like that... how do the upgraded inductrix motors compare to the nano qx motors... and has anyone tried using them on tiny whoops?
dude...i was gonna post the same thing. but noticed you beat me to it, .........flux is key.......for flooding the PCB for depopulation as well as repopulating , it was like nails on a chalk board, watching this install, all those whom read this, although jessie p is a rock star, the method for the tutorial lacks technically, hypothetically similar to duct taping something that needed bolted down............and let me make this clear, by no means am i bashing jessie.......he's done far more for this hobby than most......and i appreciate it all.....peace !
Great video Jesse! Hey do you think you'll be coming to the MultiGP event in January at the Sebring Airshow? Alex from UrbanDrones is helping set it up!
Im pretty new to it all but you pretty much have 3 choices. The original Blade Inductrix and then you have the Eachine e010 or JJRC H36 which are exactly the same. The Eachine and JJRC has stronger frames and don't crack as easily from the struts. I'm waiting on a new frame from busting my Inductrix frame. Hope that helped!
Luke Bray, forget about that, if you really want a tiny whoop!!! here is the link. cdn.shopify.com/s/files/1/1368/1453/products/13639477_10157118833195371_592571558_o_ee1b9936-af8f-4bc5-aed8-cb1134222c34_1024x1024.jpg?v=1478728525 you will be more than happy with this little beast!!!
Yeh ya can buy it already built BUT half the fun and point is to DIY that way you can make choices about what you add/dont add like motors, mounts, cameras, frames, props etc!!
I’ve bought so many of these from tinywhoop.com!! I also bought the laser kit from them as well. They all work GREAT!! I was wondering... how many can I hook up to one tinywhoop? How many is too many of you will? 😂
If you aren’t using a fan to blow away the smoke I suggest you do. Or get a stronger fan. Solder has lead. Lead messes you up. I use lead free solder, but even than it’s still not good to get in the eyes or inhaled. Take care of your health.
The smoke is all flux (rosin) no lead. Lead from the solder isn't going to get into your system unless you ingest it. So the important part is to WASH YOUR HANDS after working with it. Lead free solder is more difficult to use and the additional heat it requires is going to make the margin of error much smaller when working on delicate parts.
Ur awesome. Buy from your shop all the time. Waiting for those Blinders to go back in stock!
Wow! Super impressive! Great job and Thanx for the idea. Love it! 👍😊
When is this music gonna be available on Spotify? I could listen to the last starfighter over and over and over
you could mount them on the prop duct infront of the camera then you can see when your battery lvc kicks in .... no need for osd then ....
How do we connect the headlight to a 2s quad?
Can it work fine if i directly solder it to Battery pad ?
Thanks for showing me how to do this. I soldered 4 green LED's for my green machine build. It looks cool already, mine work perfectly.
Leo where did you buy the LEDs
now the question everyone want to know... (I think) can you do this to to the beebrain? ;)
I bought an 4-led harness uv leds. Can i use the battery connection?
What about the Disco Whoop LEDs?
Another video on doing the same to the BeeBrain!!!! Please.
Will this work on any quad that already has leds?
I have a problem that hopefully someone knows how to fix.
I had an inductrix. Worked fine. Upgraded motors and added camera. Then he problem occurred. The motors would cut out. Giving any throttle for more than 1 second would cause the flight controller leds to turn of and motors stop, then led comes back on again, but motors don't unless throttle is reset.
Any ideas?
now I don't know much about motor speeds or anything like that... how do the upgraded inductrix motors compare to the nano qx motors... and has anyone tried using them on tiny whoops?
If I send mine in will you install led for a fee ?
Get this man some flux asap! :D
dude...i was gonna post the same thing. but noticed you beat me to it, .........flux is key.......for flooding the PCB for depopulation as well as repopulating , it was like nails on a chalk board, watching this install, all those whom read this, although jessie p is a rock star, the method for the tutorial lacks technically, hypothetically similar to duct taping something that needed bolted down............and let me make this clear, by no means am i bashing jessie.......he's done far more for this hobby than most......and i appreciate it all.....peace !
Hope you can help me out, how do I do this to a BeeBrain V2 FC?
Can you order those lights off of tiny whoops page?
Great video Jesse! Hey do you think you'll be coming to the MultiGP event in January at the Sebring Airshow? Alex from UrbanDrones is helping set it up!
I've been looking to get a tiny whoop for ages now but I don't know what to get
Any suggestions
Thanks
Im pretty new to it all but you pretty much have 3 choices. The original Blade Inductrix and then you have the Eachine e010 or JJRC H36 which are exactly the same. The Eachine and JJRC has stronger frames and don't crack as easily from the struts. I'm waiting on a new frame from busting my Inductrix frame. Hope that helped!
Luke Bray, forget about that, if you really want a tiny whoop!!! here is the link. cdn.shopify.com/s/files/1/1368/1453/products/13639477_10157118833195371_592571558_o_ee1b9936-af8f-4bc5-aed8-cb1134222c34_1024x1024.jpg?v=1478728525
you will be more than happy with this little beast!!!
Yeh ya can buy it already built BUT half the fun and point is to DIY that way you can make choices about what you add/dont add like motors, mounts, cameras, frames, props etc!!
Luke Bray well check out tiny whoop website, the original website, no resellers!
There's no way I'll even attempt this. Even though I'd love have the two red leds on the rear ducts.
I’ve bought so many of these from tinywhoop.com!! I also bought the laser kit from them as well. They all work GREAT!! I was wondering... how many can I hook up to one tinywhoop? How many is too many of you will? 😂
where did you get that skull canopy on that tiny whoop on your start up video that's sick!
Music is very loud 😞 but ok i see what u done 🤟 lg 🍀
When I strip wires that small (1:40) I just use my teeth, works like a charm!
This might have been interesting but why drown it out with terrible music?
If you aren’t using a fan to blow away the smoke I suggest you do. Or get a stronger fan. Solder has lead. Lead messes you up. I use lead free solder, but even than it’s still not good to get in the eyes or inhaled. Take care of your health.
The smoke is all flux (rosin) no lead. Lead from the solder isn't going to get into your system unless you ingest it. So the important part is to WASH YOUR HANDS after working with it. Lead free solder is more difficult to use and the additional heat it requires is going to make the margin of error much smaller when working on delicate parts.
Next time don't have the music or turn it way down. I can't make out what your saying half the time.
Sweeeet