PLS READ DESCRIPTION BEFORE ANY ACTIONS! And also, please, if this video was useful for you - press like button, write some comment or even subscribe to my channel! 😇 Thanks! 🙂
@@michalg4549 you need to check pinouts for controller and pinouts for fan, i think u can connect it, but need to read technical documentation for controller and fan
is it possible to have the light and the fan work with this method? My mother board has 4 pin, GND, FAN PWR, FAN IN, and FAN PWM. its an Asus Prime B550M-K. Thanks
Its probably possible only with modification of fan (connector or PCB, I'm not sure). Without any modifications - its impossible to power on led light and rotation from 4pin connector from motherboard
You can order proper Aigo controller on AliExpress.. Manufacter recommend to use only original Aigo controllers for this fans. Quote: "Reminder: The fan and controller of this product are only compatible with and support the AIGO brand AR series cooling fan products, but there is no guarantee that they can be compatible with other brands of products." But I think you can find same type of controller, not only made by Aigo. Because on Ali you cant buy controller without fans, only as set (3 fans + 1 controller)..
No, u cant connect 6pin fan to 4pin-pinout fanhub, without modification of 6pin fan connector.. Its impossible just to plug 6pin fan into 4pin fanhub..
Если контроллер на 6 пин, а кулер на 4 пин для материнки и отдельный 3 пин провод pwm для подсветки, его можно в контроллер подключить через переходник или ещё как-то? Чтобы с пульта вместе с корпусными кулерами одинаково светились?
Так сходу я не могу сказать. Нужно брать документацию на контроллер и на кулер ваш, и смотреть в ней распиновку. Если там всё нормально, то можно переделать под 6пин контроллер. Но это надо изучать пинауты контролера и кулера.
По идее, с материнки 4пин ваш кулер берет питание и землю (12в + земля), а с 3пин берет сигналы о цвете светодиоднов.. Значит это всё, по идее, можно собрать воедино и подключить к 6пин контроллеру. Но это ПО ИДЕЕ! Я не изучал вопрос, и изучать не стану, мне лень. Но я думаю, вы справитесь и сами 😌
I think it's working on normal speed, because same 12v comes from a fan hub, same 12v comes from motherland. I don't think that from a fan hub speed will be faster.
There is no proper pins on motherboard for 3pins connection, because pinout is deferent. I guess if you connect 3 pins then nothing happen, LED will not lights up, I think
@@qm1s I aslo has cooler master mf120 and I dont have enought ports for all( I have 2 fan connectors and 0 argb headers on motherboard) should I purchase official coolermaster argb conntroler or I can buy this one (link cant be send, but I will try)
PLS READ DESCRIPTION BEFORE ANY ACTIONS! And also, please, if this video was useful for you - press like button, write some comment or even subscribe to my channel! 😇 Thanks! 🙂
thank you man! saved me some money! this worked perfectly for me
Glad to hear that!
What i can do in oposite situation ? 3 pin aigo fan and 6 pin conrtoller
Also aigo
@@michalg4549 you need to check pinouts for controller and pinouts for fan, i think u can connect it, but need to read technical documentation for controller and fan
@@michalg4549 I can't give you correct answer, because I don't have documentation
@@michalg4549 i can't describe it only by text, i need pictures, etc, to give you a answer
bro is shy
@@v037_ what?
is it possible to have the light and the fan work with this method? My mother board has 4 pin, GND, FAN PWR, FAN IN, and FAN PWM. its an Asus Prime B550M-K. Thanks
Its probably possible only with modification of fan (connector or PCB, I'm not sure). Without any modifications - its impossible to power on led light and rotation from 4pin connector from motherboard
System Fan ? Тоже подойдет?
Да
what about the rgb?
Its impossible to control RGB without fan hub or fan controler. This video only about how to power on fan, but without LED lights on it.
I think it is possible to connect the 3 remaining wires to the motherboard RGB controller @@qm1s
@@michaelnoardo3315 usually motherboards have no argb controllers..
Thank you, very clear, you have a great English and seem very friendly! Slava Ukraini 🇺🇦🇺🇦 Be safe
Thank you! 🥺🥺🥺
thanks i have same fan and it worked on msi b450
U a welcome!
and I have the same mobo and fan hahaha
is it safe?
Yes! Why not? If you follow my instructions - its safe!
does this work on 4 pin hub too?
@@NashTheGamer69 i don't know, need to check pinouts
Can the leds work even if you have an adapter
I don't understand your question
Is there controller or adapter that I can use to control rgb on this fan (aigo ar12)
You can order proper Aigo controller on AliExpress.. Manufacter recommend to use only original Aigo controllers for this fans. Quote: "Reminder: The fan and controller of this product are only compatible with and support the AIGO brand AR series cooling fan products, but there is no guarantee that they can be compatible with other brands of products." But I think you can find same type of controller, not only made by Aigo. Because on Ali you cant buy controller without fans, only as set (3 fans + 1 controller)..
my motherboard is h310a can i do that with it?
Sure! Every motherboard have 3pin and 4pin connectors for fans, same as you can see in my video!
Follow my instructions, don't miss with "keys" of connectors, and all will be fine!
Hi, i got a problem, my fanhub only have 4 pins, 12v and RGB, can i connect it from there or i need to put it on mobo or an adaptator?
No, u cant connect 6pin fan to 4pin-pinout fanhub, without modification of 6pin fan connector.. Its impossible just to plug 6pin fan into 4pin fanhub..
But you can power it on as I showed in my video, but its working only with motherboard pinouts
@@qm1s thanks man appreciate it
@@rodricraft_gamer good luck!
Если контроллер на 6 пин, а кулер на 4 пин для материнки и отдельный 3 пин провод pwm для подсветки, его можно в контроллер подключить через переходник или ещё как-то? Чтобы с пульта вместе с корпусными кулерами одинаково светились?
Так сходу я не могу сказать. Нужно брать документацию на контроллер и на кулер ваш, и смотреть в ней распиновку. Если там всё нормально, то можно переделать под 6пин контроллер. Но это надо изучать пинауты контролера и кулера.
По идее, с материнки 4пин ваш кулер берет питание и землю (12в + земля), а с 3пин берет сигналы о цвете светодиоднов..
Значит это всё, по идее, можно собрать воедино и подключить к 6пин контроллеру.
Но это ПО ИДЕЕ! Я не изучал вопрос, и изучать не стану, мне лень. Но я думаю, вы справитесь и сами 😌
@@qm1s спасибо!
thank you
U a welcome!
Thank you! It worked. But it seems that fan does not speen on 100%
I think it's working on normal speed, because same 12v comes from a fan hub, same 12v comes from motherland. I don't think that from a fan hub speed will be faster.
What happen if I connect 3 pins not 2?
There is no proper pins on motherboard for 3pins connection, because pinout is deferent. I guess if you connect 3 pins then nothing happen, LED will not lights up, I think
@@qm1s I whant to try, is there any cnace to burn smth?
@@12345fg I'm 100% sure that when you connect all 3pin nothing will happen with LED lights, light will not lights up
@@12345fg also if you connect 3pin fan will not rotate. Because pinout will be not proper (12v to ground, ground to 12v e.t.c)
@@qm1s I aslo has cooler master mf120 and I dont have enought ports for all( I have 2 fan connectors and 0 argb headers on motherboard) should I purchase official coolermaster argb conntroler or I can buy this one (link cant be send, but I will try)
b450M Aorus Elite and worked perfectly as you said, thank you so much
Nice to hear that!
Didnt works on my gigabyite b550 mainboard
Its impossible! Maybe you something doing wrong