Down-to-earth, no nonsense , clean, Harley repair videos. I'm In the process of doing the same thing to my '18 Roadglide Special with the two inch drop Progressive kit. Very nice job brother....KB
Tip for futire. Before you put the spacer in put tge cap on and slowly find the spot wear tge threads engage then take a sharpie marker and put a small line from the side of the fork tube nut into the side of the fork so you can start the nut as close to the point of engaging to make it easier to get started.
Just stumbled across your channel and have to say, nice job. I have an 09 Dyna Superglide that needs new seals and being that I'm a big fella I want to step up to Progressive heavy fork Springs while having the forks apart anyway. I subscribed and hit the bell. 👍👍
That’s awesome! Thank you, it’s much appreciated. I typically post every Wednesday. There’s a couple extra steps in Changing those fork seals, but not much. Let me know if I can help 😎
Awesome, another great clean,neat job. Nice work, brother. i need to do the same. i just put 30 weight in the forks, to see if didnt need the springs, but now that the oil is old. thinks its time for some progressives
Question, I just got the same kit for my 2020 street bob. I just replaced the folk oil a week ag0. Can I just take the top of my folks off and swap out everything without taking each fill off and draining? Thank you
It’s hard to say. They will last some people years and years. Others will last a few months. It just depends on your riding style and terrain, really. If you live in a place full of potholes or like to see how fast you can hit a speed bump then they might not last too long.
I just got these springs for my 2019 Streetbob and traker-die +2 dampers. Do you know what size I need to cut the spacer down to? And would I use the same amount of fluid as what progressive says to use or would it change because of the new dampers?
Use the same amount of fluid. That spacer is going to be cut to your preference on how stiff you want your springs, but I usually go about 1/4-1/2” longer than the top of the threads.
Nice video fella .. my bike is already dropped 2 inch in front forks.. i wanna take it back upto stock height. Would the pvc spacer rectify that if i put one back in thats longer in length or do i have to buy new springs ?
The part that lowers it is actually going to be the bottom spring on the damper rod. The longer that spring is, the lower it is. So you’d need a stock height spring and a longer preload PVC spacer
Exactly what I was looking for. Straight to the point and perfectly covered, thank you.
Down-to-earth, no nonsense , clean, Harley repair videos. I'm In the process of doing the same thing to my '18 Roadglide Special with the two inch drop Progressive kit. Very nice job brother....KB
Hats off to you, bro I’ve watched dozens of videos and this is so simple and straightforward. Thanks.
🤙🏻 right on brotha! Glad it helped
Bout to do my lady’s and my 2016 street bobs. Great how to vid. Answered pretty much any question I had. 🤙🏼
Thank you. Gathering all the parts I need for my Dyna Fat Bob.👍👍
Tip for futire. Before you put the spacer in put tge cap on and slowly find the spot wear tge threads engage then take a sharpie marker and put a small line from the side of the fork tube nut into the side of the fork so you can start the nut as close to the point of engaging to make it easier to get started.
Just stumbled across your channel and have to say, nice job. I have an 09 Dyna Superglide that needs new seals and being that I'm a big fella I want to step up to Progressive heavy fork Springs while having the forks apart anyway. I subscribed and hit the bell. 👍👍
That’s awesome! Thank you, it’s much appreciated. I typically post every Wednesday. There’s a couple extra steps in Changing those fork seals, but not much. Let me know if I can help 😎
Thanks for the great video, I'm looking to change out the stock springs on dyna low rider.
Nice job on this one bro, I think I’m about ready to do mine as well.
Hell yeah man, let’s do it!
Man, this is perfect. I’m doing the drop in kit on my heritage. 👍
Super simple job with huge results! Thanks for watching 👍🏻
Awesome, another great clean,neat job. Nice work, brother. i need to do the same. i just put 30 weight in the forks, to see if didnt need the springs, but now that the oil is old. thinks its time for some progressives
Great vid... Only thing is that this can easily be done without taking the fork tubes or tire/fender off.
Nice work man. I'd like to get one of my setups on your personal bike though.
Cant this be done with the forks still on the bike? Curious as to why you took them both all the way off?
Couldn’t that have been done on the bike using a rod to pull the spring out ?
Question, I just got the same kit for my 2020 street bob. I just replaced the folk oil a week ag0. Can I just take the top of my folks off and swap out everything without taking each fill off and draining? Thank you
Great video thanks 🙏🏼
Not to tough to put the cap back on.That’s a heck of a spring
Nicely done …how long would you say a fork seal last?I’m getting so slight film on my …and a slight harsh bump at times,Winter project for me
It’s hard to say. They will last some people years and years. Others will last a few months. It just depends on your riding style and terrain, really. If you live in a place full of potholes or like to see how fast you can hit a speed bump then they might not last too long.
I just got these springs for my 2019 Streetbob and traker-die +2 dampers. Do you know what size I need to cut the spacer down to? And would I use the same amount of fluid as what progressive says to use or would it change because of the new dampers?
Use the same amount of fluid. That spacer is going to be cut to your preference on how stiff you want your springs, but I usually go about 1/4-1/2” longer than the top of the threads.
If the kit in looking to buy says it can be lowered 1-2 inches. Does that mean I have to cut the spacer at a certain length to lower it?
It’ll be a different size damper spring on the bottom. And then you’ll have to cut the supplied preload spacer accordingly
Nice video!
Are these the same forks as on a 2000 Dyna Super Glide?
They are similar install procedures, but the forks are different sizes. 91-2005 are 39mm forks, 2006-2017 are 49mm
Great video thanks
🤘🏻
What kit u order
Nice job bro!
Thank you! And Thanks for watching
Nice video fella .. my bike is already dropped 2 inch in front forks.. i wanna take it back upto stock height. Would the pvc spacer rectify that if i put one back in thats longer in length or do i have to buy new springs ?
The part that lowers it is actually going to be the bottom spring on the damper rod. The longer that spring is, the lower it is. So you’d need a stock height spring and a longer preload PVC spacer
@@GilstrapGarage thanks for the reply ..appreciate it
Nice video.
Thank you!