bigger sprocket to increase the top speed | tvs apache
Вставка
- Опубліковано 17 жов 2024
- On this video, I have over geared the stock gear ratio for better highway performance. so that the bike can easily cruise at higher speed without any stress. All explained well on this video.
Still have any doubts, just feel free to ask in the comment section. If you have any doubts just feel free to ask in the comment section.
OR you can direct message me in instagram profile
/ mechanic_grapher
I will answer all of your questions and doubts.
Thanks for watching.
keep share with your friends.
#topspeed #chainsprocket #modification
Bro ,What is the top speed after installing 15t sprocket?
I have had this 2009 Yamaha Gladiator 125 cc (I think) for several years and noted the low top end speed around town without much highway driving at all, in which @ 50 kph makes the engine seem to scream. i recently remembered enlarging the front sprocket by one tooth for better top end speed, on my early first Honda bikes a long time ago, so now I will be replacing the chain and increasing the size of the front sprocket so I will be looking forward to a bit faster top end and better mileage too.
How much extra speed did you get ?
Sir please reply me.....🙏🏻 Kya hum apache 180 ka sproket apache 200 mein laga sakte hai....😣 please......kyuki 180 ka 14T hai aur 200 ka 13T hai ......toh 14T ka highway per top soeed jyada milega please reply karo🙏🏻🙏🏻🔥🔥
Can i use it on apache 150,i am waiting for your right feedback.
Will a 180 bajaj pulsar front sprocket fit in exchange of bajaj xcd 125 front? Want taller gearing in xcd125.
What changes if any are needed to be done?
Bro pulsar 150 or 180 ug3?.......kindly reply please....i own a apache 160 4v that comes with 13t as stock, can i over gear it 14t or 15t(pulsar's) ? Please reply.
What bike? Do you know the brand of the pannier racks? I like the bottom ledge bolted on..wondering if that is aftermarket to the racks orcamewith?
On my bike. I tried 16T front and 40T rear. I has fast acceleration but less top speed. What best combi sprocket do you suggest on my Benelli motobi 152? For high speed and low speed?
I have installed on my Apache 180 and theres a bit changes in the speed..Thanks for the video bro👍👍
How much more ? 10 km/h more ?
@@guzzidelgado 10KM
@@arunbhai_chandigarh thanks man
Great 👍
Can you source the sprocket 15t and lock with bolts?.
Kiya isko 160 4v par install kar sakta hu.... Or kitna speed increase hoga...
But this things not avilable in market.
So please tell us .where it will avilable?
i have hero ignitor bike and i want more top speed.in each gear..i have stock set up which is 14t..want to install a 16t front sprocket plzzz plzzz recommended me which bike has 16t wich will suit my bike plzzz
Whats your top speed before and now?
Read in a comment above; he got approximately 20 km/hr more on a 5-6k RPM
Karizma 13 teeth sprocket can fit in r15 v3 or fz ?
Incase i applied that modification, any Mileage drop accure in my bike?
Yes its Working too good. Initial pickup and mileage little increse. But not reach Normal top speed. Unable to reach 110
Bro which sprocket is good to undergearing for apache 180
does this use the sproket that u see the problem in your apache bike because this ug4 sproket is recommended for pulsar bike
tell me bro
@@nkkumarnandhu7260 no...nothing bro....clocked 5000+ kms without any issues....
Mujhe pulsar 150 ka change krna h kitna no. Ka use kru nd cost kya h iski
Sprocket Change for top speed is always a scam . I did front sprocket modification of 1 teeth in my hunk . the results : 4th gear = 106 kmph(before 100 kmph ) but in 5th gear less power top was almost same even acceleration decreases dramatically . if you want to increase top you have to do a lot more then just sprocket modification like racing coil +racing CDI+ bigger bore + racing spark plugs + weight reduction of the bike + free flow exhaust and last of all make your bike more aerodynamic . By doing all these you can only increase 10 to 15 kmph difference in top speed . there are some other mods you can do , like carburetor change , ignition timing change and so on for more +3/7 kmph top . And all of that are so much to do . my opinion is dont try to do any mods and you just save as much money as you can and do it fast for your next higher cc motorcycle .
Hi Vignesh,, Planning to put Pulsar UG3 15T sprocket and rear with RTR 160 44T.. any suggestions from your side?
Go on bro. That is perfect. but there will slight reduce in the acceleration of the bike. This is the setup which i am gonna do on my rtr 180
You already done it??
@@mustafm11 front one is 15T from ug4 pulsar.
But rear runs on 46T,RTR 180 rear stock sprocket.
So on the next chain sprocket change, I am gonna go with 160 chain sprockets and 15T from pulsar ug4.
Thank you Vignesh for the clarification.. once done..let us all know its performance .. :)
@@mustafm11 sure man.
Hello which chain sprocket do you suggest for yamaha rx 100 ?
Arey yaar dukan par ja or koi sabhi laga le jo fit ho jaye
Hello, can this be done on a Gixxer 155 without affecting pickup noticeably? Would this make the bike less stressed at 9k rpms in top gear? Cheers..!
If you do this it will definitely affect the pickup of the vehicle. But you can go with down sizing the rear sprocket will affects less. Please subscribe to my channel.😍😊
Mechanic_grapher what exactly do you guys mean by "pickup" ?? Does it refer to getting speed when overtaking ? (For example)
@@guzzidelgado Pick up is rate of change of speed, it is basically like how quickly your bike can go from 10kmph to 70kmph...
@@akifsafi thanks man
Oho...thank u vai...its working perfectly.when at the rpm of 4000 it was 55 now it's 60.
Knha se liya iska bhi koi size hota h
@@Synthesis1987 vai koi v bike ke mechanic ke chale jao mil jayega,aur o lock kit bajaj showroom me milega. palsur 180 ka lagega.ohi lock kit use karna.barna chain gaya....
Dukan mein ja ke bolna palsur ka samnewala 15t sprocket dena.
Bro in apache 160 can we install 14teeth front sprocket which comes installed in Apache 180?
If yes then do we need new washer and bolts?
Not necessary bro.
Both shares same type of washers and bolts.
@@Mechanicgrapher Thanks bro
One more issue,
Should I go for 14teeth sprocket or 15teeth one?
@@beelzebub7713 go for 14T one.
Because if you made any change with front sprocket it gonna make much difference then the rear sprocket. Try 14T and check whether it is ok for you or not. Then you try 15T.
I hope 14T is enough.
If you put 15T it will seriously affect the initial pickup.
It struggles a lot in traffic, since it is 160.
@@Mechanicgrapher thx for the advice.
@@beelzebub7713 😉😉😉
Can we installation this sporcket on fz16
Hi can we install pulsar ug4 150 15 teeth front sprocket in pulsar 220f 2019 model waiting for your reply
No u cant brother, pitch has to be .520. duke 390 also has .520 pitch 15T u can try that. But mind you P220 already is tall geared , I remember it does 100kph around 6.5k rpm.
By changing the sprocket can we get that drift bikey things
Sir,
I have fz25, I want to do this type of updation..
What can I do, please suggest me,
It is vary much valuable for me,sir
Please help me as soon as possible, sir
check out my stuff.. a fz25 with bigger rear sprocket with better acceleration
Splendor + ka sprocket 14 teeth ka aata h 16 teeth ka laga sakte h and tell me which bike sprocket use
Laga le ye popatjawab kam deta hai
Hi,
I wana do this to my RTR180, can u tell me if i can use plusar 180 front sprocket?
Im new to all this stuff.
My RTR180 has 14T front and 45T on rear. Pulsar 180 has 14T front and 39T on rear. Can i use this ?
Wil the front n rear on match at ones on my apache ?
@@shivraj6051 I do not know about the rear sprocket match. But the front one matches perfectly. You have to use pulsar 150 ug4 15T front sprocket along with its lock nut. Coz apache one does not matches with the pulsar front sprocket. Ask pulsar 15T sprocket in spares shop. Some pulsars have 14T and some have 15T. So you have to mention 15T at the shop while buying. If you want to go with smaller rear sprocket use apache 160 rear sprocket. It have 44 T. If you use smaller than this, let say 39T from pulsar, it may create noise whenever the chain gets loose.
@@Mechanicgrapher thanks, i will try this.
@@shivraj6051 consider subscribing to my channel 😊😇
Its that work perfect???
Which combination is better for up hill riding
City riding
Highway riding
Off roading
For better average
Can any one tell please
.....
So you want all. 14/44 if you have apache180.
@@loganlimbu2620 180 me rear 45 teeth hota hai bro
my question is if i'm decreased size of rear chain spocket do bike speed will increase
Yes definitely ....small rear spoket=high top speed ...but=decrease lower acceration
Will increase the BHp and decrease the Torque. But not much effective than the front.
It can be done in fzs 150??
Brother mery Pas United 70 hy or woh gears buht choty choty lyti hy
Means. Gear buht jaldi mangti hy.
Koi asi tick btao k lamby lamby gear ly.
can you please make it in English please
can this be done to Honda unicorn? its 15T/46T
Can apache rtr 160 sprocket fit in honda unicorn 150 ??
pulser ns 220 me fit ho jayega kya ye 15 tooth sprocket ??
Ns 200 has 13T at front.
For 15T you have to go with rc 390 front sprocket.
@@Mechanicgrapher ns 200 has 520 pitch nd 14T sprocket at frount bro
@@jaspreetsingh-iw4tm sorry. Which means, I think you can go with pulsar 150 front sprocket.
@@Mechanicgrapher pulsar 150 front sprocket not fitting in pulsar 200 ns
Sir this pulsar front spoket fit in my Apache 160 rtr
What is the proper fit for ns 200.. 15 teeth sprocket?
Jo sprocket laga huya hain usse ek teeth jada lagao fir dakho kamal
Where i can buy this bro,plz tell me.
Bro 15 teeth ns 160 me fit ho jayega
Honda unicorn has 15 teeth.... Engine sprocket... Is there any bike with 16 teeth?
Konsi bike ka dala h jo change kya h vo batao pulsar 180 ka h 220 ka
Honda unicorn ka front 15teeth ka hota h bro ktm ka loge to bohot jyada price leg jayega better ga unicorn ka lelo 80rupee me ajyega
Aur top end me jyada fark nhi pdta engine me pressure ata ha top speed gain krne me ho seke to rear sporcket ka change krke dekho fark padega top end badhega
Mujhe apache 180 ki chain spoket change karani hai to mai kon sa lagvau
Bicycle ka lagaloo
Bhai pickup down hua ho ga na
Unicorn 150 has 15 teeth I m thinking of changing to 17 or 16 to increase milage. You could have added before change rpm vs speed and after so difference would have been noticable though good job.
Yes i could have. But i do not have a gopro to shoot all those things. For your reference now i can keep up 80kmph at 5th gear in 5-6k rpm. Before that, it can make upto 60kmph at the respective rpm.
So this setup also increases the mileage too.
Mechanic_grapher excellent information !
Bhai ye big sprocket kaha se milate mujhe 17teeth ka chahiye aur rear me 30teeth ka chahiye batao
Janatha garage
Ur top speed before and after
Bhai ug3 Pulsar 150 hai ya Pulsar 180
Purchase knha se Kiya iska koi size hota hai
How much speed increase after this process
10 KMPH in every gear
@Mechanic_grapher TN 58 AK 5058 madurai kaaran💪
How to installing bigger spoket in gixer?
Great video mate, thanks
Happy to help you bro. Please consider subscribing to my channel.😉☺️
It well increase top speed or not ?
YS
Is this apache 180cc???
Chain sprocket kahan se Li Hai Mujhe b leni hai batao
Sorry for your inconvenience bro. Can you please ask me in English.
Buy it from a local dealer
Janatha garage
Then whats the ratio now?
पलसर 220मे तो 14की है उस में भी 15कि आ सकती हैं के बताओ
English please bro.....😊
Han aa sakti hai.16 bhi aa jaegi
Did you get the increase you wanted? What’s the top speed now?
Yes... actually with my weight 85kgs, without leaning on the tank, my bike reaches 124kmph with the stock sprocket. But now it can go up to 126kmph....
I have done this set up 15 teeth of pulsar 150 sprocket it will slightly increase top end at the same time u will loose initial pick up,so I shift back to stock one,,u can try, it u will find the difference
@@nirmalrizal6219 - Great, I'll keep it stock, except I just added some Larger diameter tires so top end has probably increased
@@Mechanicgrapher only increase 2kmph. 124-126kmph .i think sproketing is useless
Mila knha se Bhai ye wala sprocket
Will it increases mileage
Yes it is. A little.
Even though I am using updated main jet the bike does not lacks any mileage bro.
@@Mechanicgrapher what is main jet?
@@anandakrishnansr4988 the stock main jet is 125 and i have upgraded it to 130 size
Pulsar 135ls mai kai bike ka dalu..... Must reply
TVs XL heavy duty ka dalo
Kaha milega ye top speed ke liye
I did the same for my TVS Victor GLX 125 cc.
Front sprocket was 13T earlier, I changed to 14T sprocket of Hero Honda CD 100 SS
Earlier, with 13T sprockets, I felt vibrations on handle above speed of 50, now I feel vibrations above 60 kmph speed with the 14T sprocket.
I don't know, why TVS gives one teeth less to front sprocket?
For my 150 cc pulsar dtsi 2005 model, front sprocket is 15T, also many bikes have front sprocket starting from 14T, only TVS bikes and Mahindra Centuro has 13T front sprocket.
TVS must give one teeth extra for gear sprocket, it helps reducing load on engine.
Can I over gear hero passion bike
Yes buy a hayabhusa sprocket
Ca i use this on my apache rtr 150cc?
HaShaN JaYakodY yes bro . . .but you need to use pulsar sprocket lock nut and bolts. Buy good quality tvs bolts.
Bro top speed ipo Ena iruku
What can we do for Apache 200?
What is the setup for 200?
@@Mechanicgrapher i have installed iridium spark plug+free flow exhaust+k&n 1060 and pulsar 180ug4 front and rear sprocket with 428 chain.....soon i will install 34mm carburettor
Here's my contact number 8084423602....ping me on WhatsApp...i will suggest you more modification for your bike
@@SahilQawiKhan 34mm means which crab you are going to use? The RE ones???
@@Mechanicgrapher ping me on wasup....i'll tell you🥰
Where can i find a 13t sprocket for honda unicorn??
Go for karizma front sproket its 13t
@@solveityourself2158 but the chain pitch is different so it wont fit...
Top speee to badh jati h lekin us top speed ko pahuchne me lagne wala time bhi badh jata h. Bhut bura lgta h tab.
pikup mam ho jayega kya?
SAGAR chougule pickup will be reduced little bit bro
Bro can it be done on hero splendor
Han ho jayega .milage bhi badega
Hi mate,I was just looking around the comments and i saw you have done upjetting.It would be greatful if you make a video about it.
Thank you for your interest.
I have completely upgraded the carb to bs 33 mm.
I am working on it.
I will make a video on that soon.
Stay tuned.😉😍
@@Mechanicgrapher any idea where can I upjet my carburetor
@@gameronabudget1811 yes i am planning to make a video on it. Probably day after tomorrow i will i upload the video. It also includes upgrade for the jet nozzle too.
@@gameronabudget1811 sadly the carb upgrade plan was total failure 😪 due to the vacuum pressure generated in the carb affects much more when i upgraded the 33mm carb. So i have again stick to the stock carb with updated jet and nozzle.
@@gameronabudget1811 now it has better top end power too 😇☺️😊
Cool. Thanks for the vídeo
Please bro spocket company link
Use unicon front sprocket..... It's 15t sprocket... And it's chain size is 428....
Any one please give the link for over gearing the chain sprocket front gear link
For which bike? If you are searching for RTR, then you can buy the bajaj pulsar 150 spare from 99rpm.com. Also you can buy any bajaj spare from 99rpm.
@@Mechanicgrapher
Iam looking for hero honda passion brother
Top speed kitni huwi?
Not checked. I am doing further modifications on my bike. Soon will update about the top speed and mileage characteristics.
AA. Vignesh vicky do let us know once you test.. awaiting results....
भाई तुम्हारी ये वीडियो मेरे फोन पर प्ले नही होरी है
Please tell about more thing you will one more video to post
Do over gearing increases mileage
Yes bruh. Little bit. But, it gonna cost the pickup(acceleration) for that.
I guess this could harm my bike's Torque.
Much less torque you think ?
It will reduce the torque, by a bit.
yeah bro
Any one
please send me the link for hero honda passion front sprocket for over gearing
Bro 15 inch can fit in apache rtr 160
Vai 15t sprocket kaha milta hai
Bajaj Pulsar ki open market se le lo bhai
Or kuch change nehi kia sirf front sporket
Great
Please bro link description
kahase lia bolo?
Spocket company link
Bron it is available at all the automobile spares shop. 15t sprocket is pulsar 150cc front sprocket bro. There are no link on websites bro.
Rahane do aap ki bus Ki Baat Nahin Hai bahut jaldi video jaldi jaldi video banate hain Itna To sochne ka bhi time nahin Dete Hain kya chal raha hai pura video mein
Bhai socket to nya leleta
Video mst h
English bhai....do not know hindi....😊🤗
Jo Esa کر Ky khud ko engineer سمجھتا ha wo change kr Ky bike top gear Main chla kr پھر mujse رابطہ kry
Can you source tis item
Yeah. That one is from Bajaj Pulsar 180 motorcycle.
Place chain sprocket link description
It is advisable to buy it from your local automotive shop bro. In online it is such a mess to find and they are not reliable, you cannot assure them.
While buying them from your local automotive shop just check, whether it is manufactured by LGB ROLON or DIAMOND. They are oem of chain sprocket for all the motorcycles.
@@Mechanicgrapher Thanks for the reply,
mine is 14t bck is 34t ..topspeed 125
But torque is low from big sprocket
Link dijiye khase kahride
15 teeth chain sprocket place link description 🙂
Duke 390 have 15t front sprocket