"Resizable" Large Dowels Maker with a Router // 다양한 사이즈가 가능한 대형 원주목(목봉) 지그
Вставка
- Опубліковано 23 кві 2019
- It is a jig that can make large-sized dowels of various sizes.
다양한 사이즈의 대형 원주목(목봉)을 만들수 있는 지그입니다.
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
"DCA 라우터 트리머 AMP02-6"을 사용했습니다.
다음 유튜브 영상을 참조하세요.
• DCA Router Trimmer AMP...
If you have any questions, please leave a comment. Let me explain in detail.
Thank you for watching. Hope you enjoyed this video and if you like it, please share and subscribe !
궁금한 사항이 있으시면 댓글 남겨주세요. 최대한 자세히 설명드리겠습니다.
시청 해 주셔서 진심으로 감사드립니다. 이 영상이 도움이 되셨기를 바라며 구독과 좋아요 부탁드립니다.
==================== Other DIY Videos ===============================
► Ultimate DIY Table Saw Fence // 사용하기 편한 테이블쏘 조기대
• Ultimate Table Saw Fen...
► Drill & Router Bit Storage Tray using Straw // 빨대를 이용한 드릴, 라우터 비트 정리함
• Drill & Router Bit Sto...
► Fully Adjustable Safety Hand Push Block // 완벽하게 조절가능한 안전한 푸쉬블럭(안전밀대)
• Fully Adjustable Safet...
► Resizable Finger Joint Jig // 크기 조절가능한 주먹장 지그
• Resizable Finger Joint...
► Powerful Wooden Mallet with Aluminum Weight // 알루미늄을 결합한 목공망치
• Powerful Wooden Mallet...
► Laser Guide to Drill Press // 탁상 드릴프레스 레이저 가이드
• Laser Guide to Drill P...
► Pot Lid Rack Holder // 냄비, 후라이팬 뚜껑 걸이
• Useful Pot Lid Rack Ho...
► Ultimate Miter & Right Angle Jig for Crosscut Sled // 썰매지그용 삼각형 & 직각 지그
• Ultimate Miter & Right...
► Quick Release Wooden Vice // 퀵 릴리즈 기능을 가진 우드바이스
• Quick Release Wooden V...
► Resizable Large Dowels Maker with a Router // 다양한 사이즈가 가능한 대형 원주목(목봉) 지그
• "Resizable" Large Dowe...
► Tenon Jig for the crosscut sled // 썰매지그용 장부 지그
• Tenon Jig for the cros...
► Long Tapering Jig for the crosscut sled // 썰매지그용 책상다리 지그
• Long Tapering Jig for ...
► 4-Way Blast Gate for dust collector using 3D printing // 3D 프린터를 이용하여 4방향 집진 분배기
• 4-Way Blast Gate for d...
► Extreme Crosscut Sled with dust collector & flip stop block // 다양한 기능이 추가된 테이블쏘 설매지그
• Extreme Crosscut Sled ...
► Workbench with built in Table saw, Router and Jigsaw // 다양한 기능(트리머, 직쏘)을 갖춘 테이블쏘 작업다이
• Workbench with built i... - Навчання та стиль
Clever dowel maker design. We shared this video on our homemade tool forum this week 😎
대단한 기술입니다~
존경합니다
관심 가져주셔서 감사드립니다. 👍
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
Brilliant I really like that no t track needed fantastic many thanks Keith ❤
ITS OFFICIAL...
This wins the Internet today😄🤘🏻
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
이게 말이됩니까!!! 네모가 동그라미가 되다뇨!!!
해보니 되긴 되더라고요.. ㅎㅎ
Amazing! an adjustable dowel maker? Wow!!!
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
There are many other videos, so if you are interested, please watch.
Good job, but I think you need to reconsider your table saw safety techniques, good luck 👍
I will take good your advice.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Excelente Proyecto.... Felicidades....
It's very useful, let's do a good job, see you again
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Que ferramenta incrível, parabéns!
Awesome! You must have spent a part of your life as a machinist/ engineer.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
EXCELENTE,FELICITACIONES.
Thank you for the compliment. :)
Wonder tips thanks
Don't show every saw cut and every screw driven. The mute button and 2x speed are my favorite controls BUT this is a great project, well executed and a fresh design. Thank you and best wishes.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Nice video 👌👌👌👌👌
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Good job...
감사합니다. ^^
Great job.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
That Muzak though 👍
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Amazing
very cool
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
great job. would love it if you put some plans with measurements. thank you
I'm sorry.
There is no drawing because it was made long time ago.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Clever
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
우와~~ 이렇게 하는 군요 ㅎㅎㅎ
댓글 감사드립니다.
이 영상을 보시는 분에게 조금이라도 도움이 되시길 바랍니다.
Muy bueno extraordinario
Thank you for the compliment. 👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
@@TreeAnWood eres un genial en la solución y te reitero mis cordiales felicitaciones
Thank you very much. 👍
What type of router bit did you use in the router when making the dowels? Great video, thanks. Andy UK
Below is a link to where to buy the bits.
ko.aliexpress.com/item/4000991067130.html?spm=a2g0s.9042311.0.0.27424c4dYCdQCm
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Nice work.Great design. Despite what some say, it is not an overly complicated or complex project for someone with good table saw experience and measuring skills. I machine the ends to fit into a 5 point socket and use with a drill adapter. Keep up the good work. I would hire you for my shop any day.
Thank you very much for the compliment.
It's an honor for you to hire me.
Always be happy and healthy ^^
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Now Thread them.
Very hard can cteate simple like shaperler pencil
Alat serba canggih mesin semua .coba bkin kreasi yg serba manual boss
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos
13:13 that was a monster .......... dowel :-)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Muito bom gostei muitíssimo
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Jeeze! I hope he doesn't accidentally back over the jig with his car!
Thanks for your interest.👍
안녕하세요~
혹시 저 전산볼트에 그대로 물려도 전동드릴그 이빨이 안 뭉그러질까요~?
관심 가져주셔서 감사드립니다.
지금까지 사용해 본 결과 드릴에 따라 틀리겠지만 문제가 없었습니다.
좋은 하루 보내세요~~~
Genius
Thank you for the compliment. 👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Excellent work...the entire video would be much better if you dropped the corny noise in the background like the guy beating on (????) .
Thanks for the advice.
👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Buen artilugio
Pero poca seguridad al usar la sierra de banco
En el minuto 5.20 y 12.40 se ve la mano izquierda y la ropa suelta cerca del disco ( sierra)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Bien chafa tu invento amigo
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
It will be possible, your advice as to how I should do or the method, to round only the square or rectangular tips of rods or wooden sticks, which are used to make beach extension chairs or deck chairs, the rod or stick, measures by a side 2 and 1/2 inches and on the other 2 inches, which would be 6.25 cm X 5 cm, that is, the idea is that the rod that rests on the floor is rounded and not square or rectangular, which would look more aesthetic. Thank you and I ask for your contact.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Será posible, su asesoramiento en cuanto a como debo hacer o el método, para redondear solo las puntas cuadradas o rectangulares de varillas o palos de madera, que se utilizan para hacer sillas de extensión playera o reposeras, la varilla o palo, mide por un lado 2 y 1/2 pulgadas y por otro 2 pulgadas, que serian 6,25 cms X 5 cms o sea la idea es que la varilla que descansa en el piso quede redondeada y no de forma cuadrada o rectangular, lo que se veria mas estetico. agradecido y ruego su contacto.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Could you produce some drawings / plans we could buy?.
Sorry. There are no drawings made in the past.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Потрясающий станок и не мене потрясающий результат работы на данном станке. Респект конструкторской мысли!!!
Thank you for the compliment. :)
Weon cero seguridad.
ty ruski da?
Göstei
.
Faster and easier on table saw for large dowels…
What is the type of user wood?
I used the pine wood.
If you have a lathe easy peasy.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Metterò Heros italiano
отлично показаны методы сборки, но к чему такие сложности ???
на токарном станке круглые дюбеля сделать гораздо проще !!!
Thanks for the advice.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
which cutter did you use for roter ?
Thanks for your interest.👍
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
ua-cam.com/video/h1er_lmya2U/v-deo.html
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
thank you
Bisa order ga om, bikin sendiri belom sampe otak saya seperti nya. Sama alat nya kurang memadai.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Un millón de likes!!!
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
넓이 74cm-->너비 74cm
관심 가져주셔서 감사드립니다. 👍
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
resizable large
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
The poor battery drill has not enough torque to really be good at this. It would be much better with a keyed chuck and 110v powered drill. The batteries are weak and it is no match for 110 volt drill.
Thanks for the good advice.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Bu tahta yapılışı nı bende istiyorum
I'm sorry.
I haven't created an old video drawing.
Only these days, I added drawings to videos.
Thanks for your interest.👍
Likes too short, just ordered a large dowle off Ebay
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Здравствуйте. Скажите пожалуйста, что за фрезер у Вас?
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
ua-cam.com/video/h1er_lmya2U/v-deo.html
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Порнография высшей марки.
الحمدلله
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
혹시 원주목 홀드 제작 도면을 좀 받을수 있을까요?
관심 가져주셔서 감사드립니다. 👍
죄송한데 초기에 만든것이라 도면은 따로 없습니다. ^^;;
@@TreeAnWood 네 답 주셔서 감사합니다^^
Itu. Alat. Yang. Bubut. Kalau. Beli. Berapa. Bos
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
you should sell these
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Bisa. Beli. Ngga
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
QUE BROCA USASTE EN EL ROUTER
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
ua-cam.com/video/h1er_lmya2U/v-deo.html
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Ridiculously complex. Is this good for continuous production of, say, thousands, even 10k's of dowels? Lots of nice jigs
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
If you are going to do that many, make it metal, but yeah, the concept could be the same, just protecting against wear and repeated stresses.
Дюпеля такие ни к чему а вот черенки для садового инструмента вполне, и если небольшая кривизна то на токарном не сделаешь а тут влегкую только скорость вращения дрели на более малые обороты.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Благодарю! Возможно Вы правы. Однако существуют, помимо прочего, традиционные методы, и соответственно технологии, проверенные временем требующие применения "дюбелей"(название в разных традициях разные) подобного размера. Возможно этот станок устраивает автора, несмотря на то, что, возможно, "калибрование" заготовки зафиксированной в " центрах", и вращаемой вручную, даже без токарного станка, при использовании фрезера, кажется проще. Для кого как.
🤦♀🤦♀
Не делайте как этот дядя!
Thanks for your interest.👍
@@TreeAnWood 🤔знать бы, что это значит...)
一
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
0
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Or you can use a lathe 😂
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
I don't like your taste in music ( and you progagly don't like mine) so why make us listen to YOUR choice in music just to see your take on a dowel jig?
Thanks for the advice. In the next video, I'll pay more attention to music selection. Have a nice day. Thank you.
Steve Mitchell.. does your computer not have a VOLUME CONTROL ? just use that instead of being so negative.
Дружище, купи токарный станок и научись на нем работать.
Thanks for your interest.👍
l
Complicated