How to Replace Front Window Regulator 1995-2001 Ford Explorer
Вставка
- Опубліковано 16 вер 2024
- Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ib/1AWR...
This video shows you how to install a front window regulator on your 1995-2001 Ford Explorer. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obbb/1A...
• Phillips Head Screwdriver 1aau.to/obbb/1A...
• Rivet Gun & Rivets
• Trim Tool Set 1aau.to/o3R/1AX...
• 7/16 Inch Socket 1aau.to/obqv/1A...
• 1/2 Inch Ratchet 1aau.to/o87/1AX...
• 1/4 Inch Ratchet 1aau.to/oaWT/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obfu/1A...
• Drill
• Drill Bit Set 1aau.to/oam/1AX...
• Gloves 1aau.to/oLx/1AX...
• Liquid Thread Locker
• Safety Glasses 1aau.to/oE3/1AX...
• Hammer 1aau.to/oPW/1AX...
• Punch
• Vise
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I appreciate your time to put this together...it helps a lot. However, for many of us who have a motor that quit with the window in the down position, we can't exactly use the motor to raise the glass into the upper position....so how does one get to those rivets to get the glass separated from the track?
What if the window is stuck on the bottom position and it wont go up? Any video on this for a 2001 Ford Sport trac rear passenger side window.
Why would you need to replace the regulator unless motor burned up.
Great job, thanks!
What size of rivet?????????
Can any one tell me what size bolt i.e. 1/2 1ih i know they are 10mm but no one knows how long they have to be
Can you tell the size of the 2 bolts & lock nuts the you put Blue Loctite on? Thanks
The Spring on mine doesn't have any tension. When I put the Spring on the regulator and turn the piece around to get tension on the Spring, the center shaft just spins. I guess it broke loose... has anybody ever seen that before? Will it work like this?
What size rivets?
That’s pretty cool
Yeah still need the size of the rivets plz.