Today our self healing cutting mats are in the hot seat. So much to know about our tools. Once we know the details, we can use them correctly and maintain them as they should be so they last longer. I hope you enjoy this dive into cutting mats. They are an important part of of quilting
Hi Karen, you missed an important point. Many mats have a lifetime guarantee and will be replaced for FREE if you start having cuts that are not healing. I replaced my large mat this way - I believe both Olfa and Fiskars have that guarantee.
HI KAREN, SO, I AM A REVISED BEF=GINNER SEWER AND I AM TAKING SEWING CLASS. WELL I USED MY NEW IRON WITH A TOWEL TO IRON MY T-SHIRT SLEEVES. NOW I SEE A SIGN THAT SAID DO NOT PUT HEAT ON THE CUTTING MAT, SO NOW IT LOOKS LIKE A COUPLE OF SHORT HUMPS. HOW CAN I MAKE IT FLAT AGAIN?😁
Great tips! Here’s one more: Your old, sliced up cutting mats make great firm bottoms for handbags and other homemade bags. Just cut to size, cover with some fabric and pop it in!
Do NOT use a power tool to cut--the heat generated will relax nasty toxins from the vinyl. But tin snips work well (just cut my 5 layer 3mm mat that is 40" across (to take down from 80 to 72).
Hint: when travelling with your mat in freezing weather, keep it in the heated part of your car. A very cold mat can break when you pick it up. I learned this lesson the hard way.
I also flip mine over to use 505 basting spray. The top stays clean, and the bottom then has a bit of friction which keeps it from sliding when I am cutting 😊
to flatten a self healing cutting mat - mine got seriously warped ( like wavey ) during a summer house move. All I did was lay it flat on the clean, level patio in the full sun for half a day, in full sun, and it went completely back into shape. I had read some years ago, that a husband had put his wife's mat in the sun with a sheet of glass on top with the same result, but I had no glass. My mat is perfect now. :)
Almost 20 years ago I was given a cutting mat that folded in three. Over the years, those folds have weakened until they finally gave way. I finally caved and admitted I needed a new one. My wonderful mother in law, who taught me to sew, bought me a tabletop sized one for Christmas. So I've been using the pieces of my old one as mini, turnable, moveable cutting mats. I can't believe how handy the little 12 inch pieces are!!!
I bought a large mat from a flea market and used it for a couple of years. I struggled with my piecing but never equated it with the mat. When I got my new mat, something triggered my brain and I took out a ruler and measured the measurements on my new and old mat. The old mat had measurements that were off, like REALLY off. No wonder my piecing was so awful! Now I check the accuracy of my mat and rely more on my ruler for accurate results.
You are incredible! I found a HUGE mat at Goodwill for $2.00!!! Got it almost completely clean (embedded batting)...will use the bathtub hack to finish the process! 😊 😊
I love my Martelli mat. Saved up and kept checking back for their sales! I also bought their strip ruler. Best ruler ever. No slip. And I rarely use a ruler to measure anymore, the Martelli mat has continuous markings so it is easy to line up your fabric. They even have a special spot on their mats for 12”, 10” etc squares
I’ve been putting off cleaning mine but now I know the time has come. Thanks so much for your great advice Karen. Congratulations on your 300,000 subscribers. I know you have worked hard for this and I’m glad that it’s come to fruition.
I was gifted a good cutting mat 20-odd years ago when I started getting into sewing. I didn't continue but I've always kept the mat, stored behind a dresser or somewhere flat, away from heat. Occasionally it would be used for a small project. Now that I've taken up quilting I'm so glad I hung onto it, and just happened to store it correctly so it's good as new. I've always just wiped it down with a damp rag but I'll make sure to clean the fibers out of it now.
The dollar tree sells a makeup brush dry cleaner in a round tin that I use to clean the fibers off my mat. I saw that it looked similar to your piece of foam when i saw your other video about common household tools to use in your sewing room (sorry, I forgot the actual name of the video, it has a picture of you with the red tool box). It looks very close to your piece of foam and works great!
Great tips, Karen. I melted my first 24 x 36 mat with a lamp many years ago. So sad as it was a time when I couldn't afford to go out and buy a brand new large mat right away. I was using the mat under some close work I was doing on another craft. I had a lamp that was lower to the surface. It was a regular bulb from yesteryear. Too hot. Very disappointing, but I kept this mat. I now use it for my crafts that use paint, glue, etc and keep my "new" mat for fabric only. A very expensive lesson. I use a lint roller after I do fleece or batting. It gets up most of the fluff and it hasn't left a sticky residue. I have also purchased "cheaper" mats. The surface started flaking off right away every time my rotary cutter was used. My tip is to always buy Brand names.
I had that large 24 x 36 mat years ago. We were moving and I put the mat in the back seat standing up against the back. It was summer, and unfortunately I left the items in the car during the heat. Warped my mat and it did not straighten out. Expensive lesson learned.
Two dollar blade I wish. $25.00 for an Olfa 28mm blade in NZ. As always very informative. It makes my day when I see a new video from you waiting to be watched. Thankyou.
Perfect timing! My small A4 mat finally kicked the bucket and I've been wondering what the difference between all the mats were! Thanks as always for your videos
Just bought a mini iron. Haven't used it yet but I've never payed attention to the cleaning. 🤷 I will this time. I have two larger older irons I rarely use. I usually use a mister. I only hope they don't have water in them that have been sitting for yrs. I will test them after cleaning and see. Luckily our water is spring well water. I may need a new larger one. Learned long ago to iron my clothes after getting them out of the dryer with a mist bottle by hand. It works really well🤗 I bought a Juki about 10 yrs ago. I did read instructions many times and still do. I only quilt and straight stitch. The rest is all by hand. I love this machine. I haven't used it too much in the last few yrs with a bad back but have had that mostly taken care of. Rearranged my sewing area to accommodate the back. Thanks for the tips!🙋🌼
I have binge watched your videos…amazing! I have always been too afraid to try quilting but now after watching your channel I feel more confident and ready to do it. Thank you so much for sharing your gift.
Happy Valentine's Day, Karen! Congratulations on 300K plus. I find your videos inspiring and helpful. I am going to start my first lap quilt soon using shirts, tops, etc which my Mom wore just before she died in August.
This is the most informative video I have seen! I’ve been digging through a lot of videos and how to’s etc. since I am beginner who started just over a year ago. Masks, table cloths, placemats, skirts, etc. I wish I had found this one on my original search. I plan on starting a quilt soon. Just trying to decide the proper products for what I need. Thank you for making your videos, (I have watched a few of them so far,) so informative, The right amount of information delivered at the right speed, clear and concise, you do not drone on and on, you’re an excellent presenter! I like the included video clips that show work in progress. I actually watch your videos right till the end : ) Looking forward to learning more!
Great tips Karen. I have been cleaning with a foam square but time for a soak in the bath. Turning over for batting now or keeping an older smaller mat just for batting. I have quite deep ridges on my usual cutting lines so I have turned my mat around and added new numbers to make it easier.♥️🇦🇺
I bought the best mat…. Then ironed on it , BUT USED TOWELS thinking I wasn’t harming it…warped the mat.. got a new one & a super thick wool pad… it warped that mat😡……..so now I got another mat (#3)isn’t as thick or nice… so I’m going to try your hack with the books to restore my first mat……I was never so frustrated!!!! Currently I use a fold up ironing board & my wool mat for smaller pieces… on a square file cabinet… I did find a heat resistant mat from value village not sure what it was for but it was old & still in its package & I put that under the thick wool square mat… so I got that going for me.. 3 mats later…lol. I thought I was so clever getting the extra thick wool ironing mat. Thinking it wouldn’t warp the second cutting mat!!! It NEEDS TO BE SOLD WIITH A BACKING OR NOTE TO indicate DO NOT PLACE IT ON CUTTING MATS… PS…. A small chunk of 2x4 or 2x6 by 6 inches makes a great moisture absorbing block after ironing.. little trick I learned along the way.. 🤗
Thank you for explaining this. I put a reminder in my monthly calendar to turn or flip my cutting mat. I never did wipe it down yet, but did after your video.
I keep used bounce sheets and use them to wipe the cutting mat regularly. They are dry and have just enough abrasion to wipe off any lint. Thanks for your videos. I especially like your dollar store ideas.
Thank you SO much for this video! You answered every question I had and more I didn't know to ask. One thing that I notice when shopping for one is a lack of info on weather mats are both in inches and metric. I (usually) use metric for sewing but imperial for many other tasks. I will take your advice on buying a smaller/less expensive mat to determine what it is that I will need for my forever mat. Congrats on your successes!
Good video. I just bought a new cutting mat (my original one was over 20 years old), and I can't believe how cutting is so much easier. I always thought it was my blade but now I think it was the cutting mat. Nothing lasts forever!
Thank you for the review and I always gain something new, the cut the batting on the back of the mat was brilliant but of course I didn’t think to do that☺️.
Karen. I've been a long time subscriber, maybe from the start of your channel. I just wanted to say I am praying for your Country. I have strong opinions on what's happening, this is not the proper place to state them. But above all opinion, I believe your Country and citizens need prayer. Every single citizen no matter the side. Every single one. So with the same fever that I used to pray for your son, I will now include his, (and your), countrymen. God Bless the Maple leaf and all who live under it. Beth from Ohio.
I obtained my first cutting mat around 20 years ago. It came from where I worked because the art/graphics department was cleaning out their old supplies and I was given permission to take any of the discarded items. I came away with the full Pantone color guide (the kind that fans out), assorted cutting tools, and this huge, heavy-duty cutting mat that covers my cutting table. It did warp a bit in one corner because it was July and it took a while to get home but over time and with many heavy objects kept on that corner, it's nearly flat. I do have one of the larger green mats but for sewing nearly anything I prefer the big old white one. I do like the green mat when doing precision cutting because it's easy to turn for the best cutting approach and it has more markings suitable to sewing projects: the big white one is only a grid although its ruler is the same as the green mat. I will try the tub-soak cleaning method on it since I've only done spots over time. It is still white but there are a few fuzzy areas. My green one doesn't seem to get the fuzzies though.
I keep my old mats so when I’m squaring a quilt I abut two large mats on my dining room table for a 72” length. Doing this makes squaring a quilt or table runner easy.
Terrific information! Another thing to think about before you might do this, cutting fabric on a slick surface will damage your rotary cutter blade, but when the cutter slips, and it will you run the risk of a nasty laceration. So save yourself some sutures and use a good cutting mat! Stitches belong in fabric not people!
I so look forward to your videos. YOU taught me to quilt and you teach me something new with every upload. Thank you for being such a valuable and informative teacher. Time to go clean my cutting mat.
Karen, this was so helpful! I have been wondering how to assess my cutting board, and I judge it fit for a little more miles with just a little care. Thank you!
Hi, I just wanted 2 let u know, I saw one of your videos and u you were talking about the UPPERCASE magazine Well, I ordered one and love it. Going to get an entire subscription. Thanks!!
I got a round rotating cutting mat as a Christmas present two years ago I love it. Very handy when I am working with a lot of 2 1/2 and 5 inch squares.
I was going through a bunch of junk and found one of these things, and had no clue what it was. I don't see myself using it, but thanks for explaining it.
At a conference years ago, I had a manufacturer tell me the Olfa green mats NEED to be hydrated regularly. My smaller ones go in the bathtub overnight twice a year. My 72” one is glued to my cutting table, so once a week I put a wet towel on it overnight. I didn’t verify his claim, but the first one I bought in the late 80’s is still going good (although the marking lines are long gone)
Pretty much everywhere you go they say the same thing - hydrate your mats to keep them going longer. This is the first time I've heard you don't need to do that. Now I'm confused about it. I've been spritzing my mats with water between projects and giving them a bath twice a year.
Karen, I had a seriously warped A1 sized mat and I laid it in the bath and poured a kettle full of freshly boiled water over it, and the mat softened IMMEDIATELY - I dropped it onto the hard floor and voila! A PERFECTLY flat mat that cooled within 30 seconds into that flat form.
I had a laugh when you said put your mat in the tub to soak. I would need a swimming pool to soak my mat because I have a very large industrial size mat. But I do have a couple small ones, but I don’t feel they need to be soaked. Great info.
Thanks for confirming the steps I normally do for my cutting mats! Its always good to review things to be sure you are current and I appreciate your videos. I would like to know where you can find a $2.00 rotary blade. I have not seen one at that price on the west coast for over 10 years or more. If you have a good source I'm sure there are a lot of us out here that would love to help that source by buying blades form them!
True. She just answered about buying them in bulk. Then they do only cost you $2 a blade. Most people won't need to buy 10 blades or something. Joann does sell them in bulk in the Notions section for teachers buying for a large class.
I love your videos. But I have a request. Can you tell us about your Bernina Sewing machine, why you chose it and the costs to maintain it. I am interested in a Bernina but am not near any store to try or look at it. Closest place is 100 miles away. thank you
My Rolson cutting mat was dulling my rotary cutter within a dozen cuts, was driving me nuts and doubled the time making HST 😓 Changed to a Fiskars and problem solved.
How are you cutting down a mat. I missed if you covered it. You give out such useful info and I get caught writing stuff down when I should be listening. At any rate I haven’t been successful.
I came in to watch your video and I have no idea how I would of clicked in "thumbs down" There is NO WAY I would have done that, so a big two 👍👍 in the comments! Sorry Karen. I love your videos.
Today our self healing cutting mats are in the hot seat. So much to know about our tools. Once we know the details, we can use them correctly and maintain them as they should be so they last longer. I hope you enjoy this dive into cutting mats. They are an important part of of quilting
Hi Karen, you missed an important point. Many mats have a lifetime guarantee and will be replaced for FREE if you start having cuts that are not healing. I replaced my large mat this way - I believe both Olfa and Fiskars have that guarantee.
@@annielyst Thank you for that! I’ve never heard this before! Great to know!
@@annielyst Heyyyyy I did not know that Olfa and Fiskars had that!
HI KAREN, SO, I AM A REVISED BEF=GINNER SEWER AND I AM TAKING SEWING CLASS. WELL I USED MY NEW IRON WITH A TOWEL TO IRON MY T-SHIRT SLEEVES. NOW I SEE A SIGN THAT SAID DO NOT PUT HEAT ON THE CUTTING MAT, SO NOW IT LOOKS LIKE A COUPLE OF SHORT HUMPS. HOW CAN I MAKE IT FLAT AGAIN?😁
Great tips! Here’s one more: Your old, sliced up cutting mats make great firm bottoms for handbags and other homemade bags. Just cut to size, cover with some fabric and pop it in!
What do I use to cut the old warped mat into smaller mats? Thanks!
@@hersheyqueenlisa My husband has a table saw, I think you could use a sharp utility knife, score it and then bend it til it breaks
How did you cut down the mat?
Do NOT use a power tool to cut--the heat generated will relax nasty toxins from the vinyl. But tin snips work well (just cut my 5 layer 3mm mat that is 40" across (to take down from 80 to 72).
@@janeterikson9950 With a very very strong pair of scissors!
Hint: when travelling with your mat in freezing weather, keep it in the heated part of your car. A very cold mat can break when you pick it up. I learned this lesson the hard way.
Great tip!
Oh my gosh! Flip it over for batting scraps! I’d have never thought! Thank you Karen!!
I felt the same!
I had no idea we can do that! Great video!
I also flip mine over to use 505 basting spray. The top stays clean, and the bottom then has a bit of friction which keeps it from sliding when I am cutting 😊
to flatten a self healing cutting mat - mine got seriously warped ( like wavey ) during a summer house move. All I did was lay it flat on the clean, level patio in the full sun for half a day, in full sun, and it went completely back into shape. I had read some years ago, that a husband had put his wife's mat in the sun with a sheet of glass on top with the same result, but I had no glass. My mat is perfect now. :)
Almost 20 years ago I was given a cutting mat that folded in three. Over the years, those folds have weakened until they finally gave way. I finally caved and admitted I needed a new one. My wonderful mother in law, who taught me to sew, bought me a tabletop sized one for Christmas. So I've been using the pieces of my old one as mini, turnable, moveable cutting mats. I can't believe how handy the little 12 inch pieces are!!!
I cut up my old one into smaller pieces that I use to transport block pieces from cutting surface to sewing machine.
@@connieverbeck1110 this is what I'm doing now too!! It's so brilliant, I wish I'd started sooner. It makes things so much easier
Great tip! Those small ones are perfect for spinning
Another great tip
I bought a large mat from a flea market and used it for a couple of years. I struggled with my piecing but never equated it with the mat. When I got my new mat, something triggered my brain and I took out a ruler and measured the measurements on my new and old mat. The old mat had measurements that were off, like REALLY off. No wonder my piecing was so awful! Now I check the accuracy of my mat and rely more on my ruler for accurate results.
You are incredible! I found a HUGE mat at Goodwill for $2.00!!! Got it almost completely clean (embedded batting)...will use the bathtub hack to finish the process! 😊 😊
it worked!!!!!
Good deal for sure.
I love my Martelli mat. Saved up and kept checking back for their sales! I also bought their strip ruler. Best ruler ever. No slip. And I rarely use a ruler to measure anymore, the Martelli mat has continuous markings so it is easy to line up your fabric. They even have a special spot on their mats for 12”, 10” etc squares
I also have the Martelli mat cutter and rulers. The are my favorites.
@@carriesaindon5382 people don’t get it until they actually buy one. Then they understand what we are talking about.
I’ve been putting off cleaning mine but now I know the time has come. Thanks so much for your great advice Karen. Congratulations on your 300,000 subscribers. I know you have worked hard for this and I’m glad that it’s come to fruition.
I was gifted a good cutting mat 20-odd years ago when I started getting into sewing. I didn't continue but I've always kept the mat, stored behind a dresser or somewhere flat, away from heat. Occasionally it would be used for a small project. Now that I've taken up quilting I'm so glad I hung onto it, and just happened to store it correctly so it's good as new. I've always just wiped it down with a damp rag but I'll make sure to clean the fibers out of it now.
I've never thought of using the back side of the cutting mat. Great idea and perhaps will lengthen life of it.
The dollar tree sells a makeup brush dry cleaner in a round tin that I use to clean the fibers off my mat. I saw that it looked similar to your piece of foam when i saw your other video about common household tools to use in your sewing room (sorry, I forgot the actual name of the video, it has a picture of you with the red tool box). It looks very close to your piece of foam and works great!
Great tips, Karen. I melted my first 24 x 36 mat with a lamp many years ago.
So sad as it was a time when I couldn't afford to go out and buy a brand new large mat right away. I was using the mat under some close work I was doing on another craft. I had a lamp that was lower to the surface. It was a regular bulb from yesteryear. Too hot. Very disappointing, but I kept this mat. I now use it for my crafts that use paint, glue, etc and keep my "new" mat for fabric only. A very expensive lesson. I use a lint roller after I do fleece or batting. It gets up most of the fluff and it hasn't left a sticky residue. I have also purchased "cheaper" mats. The surface started flaking off right away every time my rotary cutter was used. My tip is to always buy Brand names.
I switched to LED lamps/bulbs for this very reason.
I had that large 24 x 36 mat years ago. We were moving and I put the mat in the back seat standing up against the back. It was summer, and unfortunately I left the items in the car during the heat. Warped my mat and it did not straighten out. Expensive lesson learned.
It never occurred to me to soak and wash my cutting mat! I’m going to do that. I appreciate you sharing all this valuable information.
Thanks Karen! This was very informative, as usual. Happy Valentine's Day. Spring is around the corner.
Two dollar blade I wish. $25.00 for an Olfa 28mm blade in NZ. As always very informative. It makes my day when I see a new video from you waiting to be watched. Thankyou.
For one blade? That's crazy! I could get around 20 blades for that price (on sale).
Perfect timing! My small A4 mat finally kicked the bucket and I've been wondering what the difference between all the mats were! Thanks as always for your videos
Just bought a mini iron. Haven't used it yet but I've never payed attention to the cleaning. 🤷 I will this time. I have two larger older irons I rarely use. I usually use a mister. I only hope they don't have water in them that have been sitting for yrs. I will test them after cleaning and see. Luckily our water is spring well water. I may need a new larger one. Learned long ago to iron my clothes after getting them out of the dryer with a mist bottle by hand. It works really well🤗 I bought a Juki about 10 yrs ago. I did read instructions many times and still do. I only quilt and straight stitch. The rest is all by hand. I love this machine. I haven't used it too much in the last few yrs with a bad back but have had that mostly taken care of. Rearranged my sewing area to accommodate the back. Thanks for the tips!🙋🌼
👍
BIG congrats on 300,000 subscribers - me included!!!!!
I have binge watched your videos…amazing! I have always been too afraid to try quilting but now after watching your channel I feel more confident and ready to do it. Thank you so much for sharing your gift.
Very helpful! All questions I had years ago that most quilters couldn't answer. Thanks so much on how to clean and maintain!
You are my new favorite teacher on you tube.
Happy Valentine's Day, Karen! Congratulations on 300K plus. I find your videos inspiring and helpful. I am going to start my first lap quilt soon using shirts, tops, etc which my Mom wore just before she died in August.
sounds lovely
This is the most informative video I have seen! I’ve been digging through a lot of videos and how to’s etc. since I am beginner who started just over a year ago. Masks, table cloths, placemats, skirts, etc. I wish I had found this one on my original search. I plan on starting a quilt soon. Just trying to decide the proper products for what I need. Thank you for making your videos, (I have watched a few of them so far,) so informative, The right amount of information delivered at the right speed, clear and concise, you do not drone on and on, you’re an excellent presenter! I like the included video clips that show work in progress. I actually watch your videos right till the end : )
Looking forward to learning more!
Great tips Karen. I have been cleaning with a foam square but time for a soak in the bath. Turning over for batting now or keeping an older smaller mat just for batting. I have quite deep ridges on my usual cutting lines so I have turned my mat around and added new numbers to make it easier.♥️🇦🇺
Honestly! Everytime I watch I learn something! Cutting fuzzy crap.on the back!! Geeeenius! Xo
Karen, you are the best!! Thx once again for your helpful, practical info. Have a great day.
I bought the best mat…. Then ironed on it , BUT USED TOWELS thinking I wasn’t harming it…warped the mat.. got a new one & a super thick wool pad… it warped that mat😡……..so now I got another mat (#3)isn’t as thick or nice… so I’m going to try your hack with the books to restore my first mat……I was never so frustrated!!!! Currently I use a fold up ironing board & my wool mat for smaller pieces… on a square file cabinet… I did find a heat resistant mat from value village not sure what it was for but it was old & still in its package & I put that under the thick wool square mat… so I got that going for me.. 3 mats later…lol. I thought I was so clever getting the extra thick wool ironing mat. Thinking it wouldn’t warp the second cutting mat!!! It NEEDS TO BE SOLD WIITH A BACKING OR NOTE TO indicate DO NOT PLACE IT ON CUTTING MATS…
PS…. A small chunk of 2x4 or 2x6 by 6 inches makes a great moisture absorbing block after ironing.. little trick I learned along the way.. 🤗
Thanks for the cleaning tips. Happy Valentines day
Thank you for explaining this. I put a reminder in my monthly calendar to turn or flip my cutting mat. I never did wipe it down yet, but did after your video.
I keep used bounce sheets and use them to wipe the cutting mat regularly. They are dry and have just enough abrasion to wipe off any lint. Thanks for your videos. I especially like your dollar store ideas.
I really liked this video. i have a large mat and everything you said about it is so true! i want to look for a good ironing pad
Thank you SO much for this video! You answered every question I had and more I didn't know to ask. One thing that I notice when shopping for one is a lack of info on weather mats are both in inches and metric. I (usually) use metric for sewing but imperial for many other tasks. I will take your advice on buying a smaller/less expensive mat to determine what it is that I will need for my forever mat.
Congrats on your successes!
Yep - warped my mat by using a wool ironing mat on it! Might have to try the stacks of books tip! Thank you for this video - it was very helpful.
Good video. I just bought a new cutting mat (my original one was over 20 years old), and I can't believe how cutting is so much easier. I always thought it was my blade but now I think it was the cutting mat. Nothing lasts forever!
Thanks Karen! Happy Valentine's Day!!
Congratulations on reaching 300.000 subscribers. A well-earned milestone!
Thank you for the review and I always gain something new, the cut the batting on the back of the mat was brilliant but of course I didn’t think to do that☺️.
Congratulations on 300,000. I've learns so much from your videos.
Karen. I've been a long time subscriber, maybe from the start of your channel. I just wanted to say I am praying for your Country. I have strong opinions on what's happening, this is not the proper place to state them. But above all opinion, I believe your Country and citizens need prayer. Every single citizen no matter the side. Every single one. So with the same fever that I used to pray for your son, I will now include his, (and your), countrymen. God Bless the Maple leaf and all who live under it. Beth from Ohio.
I obtained my first cutting mat around 20 years ago. It came from where I worked because the art/graphics department was cleaning out their old supplies and I was given permission to take any of the discarded items. I came away with the full Pantone color guide (the kind that fans out), assorted cutting tools, and this huge, heavy-duty cutting mat that covers my cutting table. It did warp a bit in one corner because it was July and it took a while to get home but over time and with many heavy objects kept on that corner, it's nearly flat. I do have one of the larger green mats but for sewing nearly anything I prefer the big old white one. I do like the green mat when doing precision cutting because it's easy to turn for the best cutting approach and it has more markings suitable to sewing projects: the big white one is only a grid although its ruler is the same as the green mat.
I will try the tub-soak cleaning method on it since I've only done spots over time. It is still white but there are a few fuzzy areas. My green one doesn't seem to get the fuzzies though.
Happy Valentines Day. Just love all your informative videos. Thanks.
Karen, Thank you for "being you" !! this is great info for all
Tried the industrial foam hack and it works wonderfully! Gotta love free. Thank you
I keep my old mats so when I’m squaring a quilt I abut two large mats on my dining room table for a 72” length. Doing this makes squaring a quilt or table runner easy.
Love hearing your advice. Congratulations on your viewers. You are fantastic 🤗
Congratulations Karen 💐. That's wonderful news. While I'm at it, Thanks for all the time and help you have shared with all of us. ❤️
Fantastic video. You answered all my questions. Thank you!
Terrific information! Another thing to think about before you might do this, cutting fabric on a slick surface will damage your rotary cutter blade, but when the cutter slips, and it will you run the risk of a nasty laceration. So save yourself some sutures and use a good cutting mat! Stitches belong in fabric not people!
Thank you for all the great tips for our cutting mats! I love your quilt in the background!
I think you are asking about foundation paper piecing.I have a video in the works
Thank you for the information. My husband also like these mats. I had one break and he uses one of the pieces I his workshop
I have mats for crafting and sewing. Thanks for the tips.
Congratulations on hitting 300,000 subscribers.
congratulations. so happy for you. love all the shows/videos.
Thank you so much for the great video on mats. It was so informative.
Wow! Congratulations!! That’s exciting!
Once again a brilliant video Karen, thank you ♥️
I so look forward to your videos. YOU taught me to quilt and you teach me something new with every upload. Thank you for being such a valuable and informative teacher.
Time to go clean my cutting mat.
Wonderful cleaning advice & flattening idea! Great tutorials as always! Congratulations 🎉 on subscribers!
Karen, this was so helpful! I have been wondering how to assess my cutting board, and I judge it fit for a little more miles with just a little care. Thank you!
Hi, I just wanted 2 let u know, I saw one of your videos and u you were talking about the UPPERCASE magazine Well, I ordered one and love it. Going to get an entire subscription. Thanks!!
Congrats on 300,000 subscribers 👏🎉🎊
Once again terrific video! Congratulations on the 300,000 mark! ❤️❤️
Perfect timing!! Trying to decide if I want to invest in a rotating cutting mat, this information is super helpful✂️
I got a round rotating cutting mat as a Christmas present two years ago I love it. Very handy when I am working with a lot of 2 1/2 and 5 inch squares.
I have 💕 both a Olfa (which is square) and Martelli (which is round and I absolutely ❤️) and I use both as I do a lot of EPP.
I was going through a bunch of junk and found one of these things, and had no clue what it was. I don't see myself using it, but thanks for explaining it.
Cutting minky fabric on the backside of my cutting mat? Yes! Great tips, thank you.
Thank you Karen 💕 congratulations on getting 300K subscribers!
Congratulations on the 300,000 subscribers!
At a conference years ago, I had a manufacturer tell me the Olfa green mats NEED to be hydrated regularly. My smaller ones go in the bathtub overnight twice a year. My 72” one is glued to my cutting table, so once a week I put a wet towel on it overnight. I didn’t verify his claim, but the first one I bought in the late 80’s is still going good (although the marking lines are long gone)
Nope, But it does make all the fibres soft and easier to remove
Pretty much everywhere you go they say the same thing - hydrate your mats to keep them going longer. This is the first time I've heard you don't need to do that.
Now I'm confused about it. I've been spritzing my mats with water between projects and giving them a bath twice a year.
Karen, I had a seriously warped A1 sized mat and I laid it in the bath and poured a kettle full of freshly boiled water over it, and the mat softened IMMEDIATELY - I dropped it onto the hard floor and voila! A PERFECTLY flat mat that cooled within 30 seconds into that flat form.
Congratulations on your accomplishment. I enjoy your videos.
Tanks for yous tâches. Cold you tel me somethings about thé tissu they used for exposé or préparer à combinaison of block? How to do one my self ?
Congratulations!!!!! Your the best!!!!!
I had a laugh when you said put your mat in the tub to soak. I would need a swimming pool to soak my mat because I have a very large industrial size mat. But I do have a couple small ones, but I don’t feel they need to be soaked. Great info.
Soaking makes the cotton fibers soft and lifts dirt. You can get the same results with a spritz bottle.
Congratulations Karen!!!
300,000 subscribers? No surprise. You’re great!
I have put mine in between my mattress and box spring. 🙏🏻💜
What brand makes a great quilting mat in 36"x48" double sided if possible ( dark & Light)?
So cool! I had no idea you could soak it in the tub
Congratulations on getting to 300K subscribers (that is huge ). Yet another fantastic video thank you 😊
could you do a segment on quilt suspension systems for domestic machines, used when quilting the 3 layers.
Congratulations Karen, and thankyou !
Thanks for confirming the steps I normally do for my cutting mats! Its always good to review things to be sure you are current and I appreciate your videos. I would like to know where you can find a $2.00 rotary blade. I have not seen one at that price on the west coast for over 10 years or more. If you have a good source I'm sure there are a lot of us out here that would love to help that source by buying blades form them!
I concur. I was wondering the same thing. Blades are especially expensive now that there is this quilting boom!
I agree
If you have a source, I would love to know. they are 10$ in my area.
You need to purchase them in bulk
True. She just answered about buying them in bulk. Then they do only cost you $2 a blade. Most people won't need to buy 10 blades or something. Joann does sell them in bulk in the Notions section for teachers buying for a large class.
Thank you very much for these mat tips. Are you going to make any more quilts on this youtube channel?
Congratulations and great information thanks for sharing. Happy Valentines Day
I appreciate your in depth detail .
Congratulations!!!!!!🙏🏻💜
I bought ons and got all fluff on mat mines at for squares I'm new too patchwork and sewing love your videos
You’re always so helpful! Thanks!
Thanks Karen!
Love your tips and tricks
HAPPY VALENTINES DAY!!!!!!!
Thank you. I will try some of your hacks for sure
Congratulations Karen on 300,00 subscribers of which I’m one. Great video 👍
I love your videos. But I have a request. Can you tell us about your Bernina Sewing machine, why you chose it and the costs to maintain it. I am interested in a Bernina but am not near any store to try or look at it. Closest place is 100 miles away. thank you
Thank you so much Karen ❤️
My Rolson cutting mat was dulling my rotary cutter within a dozen cuts, was driving me nuts and doubled the time making HST 😓 Changed to a Fiskars and problem solved.
How are you cutting down a mat. I missed if you covered it. You give out such useful info and I get caught writing stuff down when I should be listening. At any rate I haven’t been successful.
Use a saw
I came in to watch your video and I have no idea how I would of clicked in "thumbs down" There is NO WAY I would have done that, so a big two 👍👍 in the comments! Sorry Karen.
I love your videos.