Resin Name Lamp | RESIN CRAFTS 101 | DIY Name Lamp using Resin | Resin with Me | Beginner Resin
Вставка
- Опубліковано 27 кві 2021
- Do you wanna make your own Name Lamp using Resin, Letter Mold and Bookmark Mold? Try this now!
Please SUBSCRIBE --- and hit the BELL to get notified of my latest uploads!
T H A N K Y O U ! ! !
Please watch my other resin video tutorials here:
FULL TUTORIAL BEACH-INSPIRED LETTER KEYCHAIN
• Full Resin Tutorial | ...
RESIN LETTER STANDEE
• Resin Letter Standee x...
AESTHETIC UKULELE RESIN FLOWERS
• Aesthetic Ukulele | RE...
RESIN NECKLACE PENDANTS USING EYESHADOW
• Eyeshadow x Flower Res...
RESIN HAIR CLIPS
• Resin Hair Clips | Gli...
NAME IN RESIN USING TRANSPARENT VINYL STICKER
• Name in Resin | Transp...
Resin Beach-inspired Keychains Using Hollow Bezel Pendants + Water Effect on Resin
• Resin Beach-inspired K...
You’ve just solved a problem that I was just talking about a few weeks ago! 🥰 Thanks!
Am glad of help. Thanks!
@@EjoysArtSpace29 How Much Epoxy Resin And How Much Hardner Do I Need To Use In The Molds?
@@bettyclaggett2011 can you please see the label on your resin bottles. Is it 2:1 ratio?
I've been searching for a tutorial like this for so long. Good job and thanks!
Am glad of help. Thank you 😊
Wow! Super ganda. 😍💕
Thank you 😊
Ang galing mo po.
Such beauty! Patience and talent so beautiful 😍
Thank you 🎀 😊
Ang galing galing naman ni ate aba😘😘❤️❤️
Thank you Bogs 😊
I was looking for something like this... i thought doing same like this and i searched for videos, but couldnt find any.. thank you very vey much.. good luck❤️😍
Am glad of help. Thank you 😊
Sobrang galing 🌼❤️❤️❤️
Salamat 😊❤️❤️❤️
Great project, looks beautiful ☺ 👍
Thank you 🙂
Magnificent!!
Thank you 😊
ang galinggg,, lalo ko nagugustuhsn gumawa ng mga ganyan🥺❤️
Thank you! Good luck
Love this
Thank you 😊
Nice naman
Thank you 😊
So beautiful work thank you
Thank you ❤️
Nice artwork! ✨✨
Thank you 😊
This is lovely thanks for sharing
Thank you 😊
That's great , cuz I was looking for a mold for the stand😊
Thank you 😊 🎀
this is beautiful. thank you for showing us how you made it. :) i would like to try it too.
Thank you 😊 good luck!
Thank you for this! New subscriber here and I'm learning a lot from your videos 🙂
Thank you 😊
wow this is interesting
Thanks!
I love your videos
Thank you 😊
👌🏻👌🏻
Thank you 😊
AMEI ESSA IDÉIA 👏🏻👏🏻👏🏻👏🏻
Thank you 😊
resinmagic.blogspot.com/2022/07/making-epoxy-resin-lamp.html
Very Pretty. Thank you for sharing. I send you lots of positive energy. Regards as Always Lee
Thank you so much Leena 😊❤️
@@EjoysArtSpace29 You are light. Remember. You will accomplish many more beautiful things, my lovely.
@@firestarter2793 heartfelt. Appreciated much Leena. Thank you thank you 😊❤️
resinmagic.blogspot.com/2022/07/making-epoxy-resin-lamp.html
Ma’am ur a cool lady!!!!🧚🏿🧚🏿🧚🏿🧚🏿♂️🧚🏿♂️🧚🏿♂️ hands down 🙆🏿♀️ Are u an Aquarius because your creativity is out of this 🌎 when I grow up wish to be similar to you
Thank you 😊 im a Sagittarius.
You'll do great things. Start now.
c o o l
Thanks!
I think, to hide the battery, you could create a box type Resin with dark colors,then make it as stand.
That's a good tip. Thank you 😊
Just awesome! Without being too indiscreet, possible to know how much an art like this can cost?
Thank you 😊 I sell it for Php300-500 depending on the letter pieces
@@EjoysArtSpace29 Great thanks! Will it be possible for you to ship one for me to Mauritius? Can you also drop me your email address please?
This is very lovely! If you had a long name and you need to connect it I saw the first one was kind of not level would you not run into that problem when trying to connect the second one to keep it flat.
Thank you 😊 yeah, that could be a problem. Thank you for pointing it out. For that, we must make sure that it's levelled evenly.
But I saw some people are using acetate sheets if the name is long. I'll try it too.
@@EjoysArtSpace29 acetate sheets to do what?
@@sworley1956 to form a thin rectangular base which you can pour resin 😊
And you can easily customized the size depending on the length of name
where will the frame be found and what is the name of this frame and or what will it get from secrech on amazon
Hie so your video has been very helpful to us. Could you solve my small doubt regarding what could we do if we dont have the lamp to dry it out? 😅
Am glad of help. 😊
For your problem, you can just put it under direct sunlight to cure.
Wow very nice. me I know what the size of letter molder that you're using. Thank you.
1.5inches
Can I use glue as a substitute for resin?
Hello. Can I use Slow curing resin for the Stand where the fairylight is molded? bcoz UV resin is expensive and I dont have UV lamp also. 😥
Yes you can. But, put the fairy lights when the resin is nearing to cure so it not move
Nicely done.. can we add fairy lights on letters too ? Also what if there are more words ?
Thank you 😊 yes, you can
It's awesome.. can yu please tell me if I can use regular slow resin to fix the letters to the stand??
Yes you can, but you might need to check on it time to time coz it'll cure for hours.
I suggest you use E6000 glue or any strong glue rather then normal resin.
Maestra por favor me haces el gran favor de explicarme como hago una base para colocarle a las letras es que no lo he podido conseguir en Amazon, o como dígito para comprarlo. Gracias muchas bendiciones
I just used a bookmark silicon mold as base
Can I use 3:1 resin to stick the letter on book marker?
But will the letters stand perfectly?
Yes but make sure it's sticky before you put the letters so it will not move while curing
will this also work if a light color was added? like a translucent pink or blue?
Yes definitely 😊
Is there any alternative for bookmarks molder in your standee?
If you've got acetate film, you can shape it in a rectangle like the bookmark and use it as your mold. It's actually more flexible because you can shape it however you want.
Wow this is so great and so helpful.. thanks a lot
Thank you 🎀 😊
Hi, just want to know where to buy the battery holder? Do you have any link for that? Is that customize? Thank for sharing this video as well
Thank you 😊 I just bought it from a local shop
Hey. I was looking for this only. Just a bit of help needed.May I please know if normal resin could be used instead of the uv resin?
Yes you can. Just wait for it to become tacky before you put the lights so it won't float.
@@EjoysArtSpace29 thank you so much😬❤
What kind of UV resin do you use. The one I have is sticky after curing
It's a local brand here. I don't think they ship internationally.
Does it hold up the weight of the letters? Like if I put this on a desk, is it gonna fall down?
Yes. It's pretty stable
Hi there. If I don't have UV resin what can I use to paste it?
Super glue
Can we attach circle resin frame with led light
Yes
🎧
Is there any alternate of uv lamp? And what is up resin is it diff from epoxy resin?
Sunlight is the best. Put your projects under direct sunlight to cure.
UV RESIN cures using UV lamp or Sunlight because od UV rays.
Epoxy resin takes time to cure. Usually 6-24 hours if fast-curing and 3-5 days if slow-curing. You don't use UV lamp to cure it but you can also put it under direct sunlight for faster curing.
Hi there. What size packaging box did you use for name stand?
I don't sell this
Hi without respiratory mask…can use normal N95 mask..?
Work in an open area
Mam why do you use UV epoxy resin for the base? Can I use normal resin itself??
Coz UV resin only takes minutes to cure.
Yes, you can use normal resin
What is the glue that u use
What is the wire and the glitter that u use
Hi. It's UV Resin, not glue.
The wire is called Fairy lights
Waoooo it's amazing Ejoy...🇨🇺🫂😍
Thank you 🎀 😊
I need help if names long how to do the stand? Bcoz book marks only can out short names😢
You can use acetate sheets to make your own mold depending on the length of your project 😊
Hello, can I use the bookmark mould for the stand
Yes
Hi new subscriber here.. I am planning to start this business, have some tips how to start? Is UV light really necessary when making resin keychains/arts??
Hi. Thank you 😊 first thing you need to do is to think of the resin project that you want to sell, so you would only buy materials needed for it. You won't buy unnecessary molds or any thing. So you'd spend less. That's one tip.
About the UV light. NO. But if you're using UV resin, it's needed. But you can also out under direct sunlight.
Hi there! What have you used to stick the letters?
UV resin. It cures super fast using UV lamp
So pretty. I love it!
Thank you 😊
No. I used dried hydrangea.
if we're working with uv resin, we dont have to mix it like normal resin?
Yes.
@@EjoysArtSpace29 thankyou
I really love your work... where can I get the fairy lights to purchase?
Thank you 😊 here shopee.ph/product/50110139/2173416342?smtt=0.117789536-1623923265.9
I saw the ones that use the flat battery, I prefer the ones that you use
@@kellyannsimpson3510 i also prefer the ones with battery
@@kellyannsimpson3510 here
shopee.ph/product/181326714/4108619263?smtt=0.117789536-1624155641.9
I'm in Ghana 🇬🇭 and I want to start a Resin business here in my country. How do I get the materials and items needed to buy to start please 🙏 help
Hi. Please check the video description
What glue you use ? Thank you.
Is it resine or glue ?
It's UV resin
Can epoxy resin be used under uv lamp
No. Only UV resin
How you stick letters to base? Which glue
I used UV resin but you can also use E6000 clear industrial glue
Uv or exposy which one is good for online sale items
Hi what do I need to start doin resin letters plz
Respiratory Mask, Nitrile Gloves, epoxy resin, weighing scale or measuring cups, mica powder, glitters, liquid colorants, silicon molds
is it save to put resin on those lights?
Yes, completely safe 😊
Hey why u didn't use epoxy resin for base (bookmark)?
Because UV resin is faster to cure compared to epoxy resin. Tho, you can also use it
@@EjoysArtSpace29 oh thank you
Mujhe ye bnwana ha al
Hii .... Where to buy uv lamp.... Where it's a uv lamp of nail???
Hi. Yes, it's for the nail 😊 buy it online
Hi where can purchase the item all that u used?
Hi. Please check out the video description. Thank you 😊
Can you give alphabet mold
Ano pa po pwedeng ipang dikit, except po sa Uv resin, para maitayo po yung letters sa base?
Pwede po E6000 industrial glue. Sa shopee po meron
@@EjoysArtSpace29 okay po, thank youuuu!!!💜💜
hello po san nio po nabili yung pambutas nio para malagay yung chain yung para screw ano tawag don and san nabibili
Hello. Sa shopee po. Manual hand drill po
@@EjoysArtSpace29 thanks po
Ask lang po if Kaya po bang mag lagay ng fairy light ng epoxy resin po sa book mark ?? Huhuhu
Yes po kaya rin po 😊
Hello po, UV resin lang po ba yung pwede for the stand? Pwede rin po kaya yung slow-curing resin? Hindi naman po ba magbebend yung resin?
Pweder po yun 😊 nagmamadali po kasi ako kaya UV resin ang ginamit ko. Be careful lang po sa fairy lights pag slow curing resin kasi baka umangat-angat po ung lights.
Thank you so much po for replying! Ite-take note ko po if ever baka umangat hehe. Sobrang ganda po nung ginawa niyo, thank you for sharing! 💖💖💖
Welcome! Good luck!
Salamat ❤️
Is it available?
Hello, How Do You Get The Resin Molds Dry After You Get Them In The Molds? I'll Really Appreciate It If You Could Me Please And Thank You!!!
Hello. I usually wipe my molds with baby wipes and then dry tissue after demolding.
@@EjoysArtSpace29 Do You Use A Hair Dryer To Get The Molds Dry? What Would You Recommend Me I Should Try To Get The Molds Dry?
@@bettyclaggett2011 yes, haur dryer would do. Don't use heatgun directly on your molds, it will ruin em.
@@EjoysArtSpace29 Hello, What Would You Recommend Me I Should Do To Get My Molds Dry? I Have Molds That Has Epoxy Resin In Them. Did You Use A Hair Dryer To Get The Molds Dry After You Put Epoxy Resin In Them? I Have Them In Room Temperature But Their Still Not Drying.I'd Really It If You Could Help Me Please And Thank You.
@@bettyclaggett2011 oh. They did not cure still? Are you using a slow - curing resin or fast-curing? If you're using fast-curing resin, they should be cured well within 24 hours and if not, there must be some mistake in measurement. If you're using slow-curing resin, give them 2-3 days to cure.
Can you give me online classes for this?
I want to make it myself
Just watch the tutorial. It's detailed. If you have any questions, just ask here. Ty
Ano po ginamit nyo dun sa hulmahan ng letters po ?
Resin po
Price mam
question po need po talaga mgumamit ng UV light?
Yes po, dito po sa process na ito dpat po tlga ksi gumamit po ko ng UV resin
San yan mabibili yung light na ginamit mo? Baka available lang yan twing pasko.
Sa shopee po. Fairy lights po yan, always available kahit di po pasko 😊
@@EjoysArtSpace29 thank you po
Ung molder mo po ba sa letters ung sa pang keychain po ba yan?
Yes po
Thank you..
А что за светодиоды у вас
Fairy lights
Hello po, san po nakakaputchase ng UV Light na ganto? Thanks po.
Sa shopee po. Lagay ko po link mamaya, mahina po ksi net dto sa school
Thanks po. Link please ☺️❤
How many watts is your uv lamp?
Hi. 54
Thank you!!
Price
Ano po tawag dun sa light na ginagamit?
Fairy lights po
Hi. Ask ko lng po,gaano po ktgal ma cure ang uv resin under uv light? Parang ang bilis nyo lng po natapos. Hehe mga ilang hrs nyopo gnwa lahat yan?
60-180 seconds lng po cured n ang UV resin kaya mabilis po matapos.
@@EjoysArtSpace29 wow ang galing!pati po b yung letters uv resin din?
No po.
@@EjoysArtSpace29 okay po. Anopo gamit nyong uv resin? Need din po ng hardener nyan?
Magkaiba po ba ginamit niyo epoxy sa mga letters pati sa parang base po?
Epoxy resin po sa letters.
UV resin sa base
Di po ba pwedeng gamitin ng same epoxy lang?
@@brber6132 pwede naman. Gusto ko lng ang UV resin ksi mabilis matuyo
What you using for stand
Bookmark mold
@@EjoysArtSpace29 so if name is bigger then the book marker
@@junkcarz4720 you can connect 2 bookmarks
@@EjoysArtSpace29 how you connect them
How can you put letters in dog tags
@@junkcarz4720 using resin also.
Use holographic letters or dice letters.
Moulds link please
Please check out the video description in this tutorial. I put all the shop links there.
ua-cam.com/video/Z6U_gnFS67w/v-deo.html
Ye konsa chemical se banqya he name plz
Epoxy resin
Thanks
Pp of the product
How much do you sell this po?
I've never tried to sell po. Pero more or less Php450 po depending on the length of the name po.
Pp
Ang galing mo po.
Salamat 😊
Ang layo na po ng naaabot ng channel mo.