Если ступеньки болтами под 5 закрутить надёжней будет со временем от веса и деформации саморезы разбалтаются горя не не оберёшься а так хорошая идея если бы окна ещё не было то было бы супер
Few problems 一些问题。 1.Hinges should install at bot not top, this is at least without talking other things. 合页应该装在台阶下面，这样螺丝才受力。不应该让受力方向和螺丝相反。 螺丝从上往下打，人从上往下踩 受力的只有螺丝的螺纹… 2.All timbers are really too thin, also use pine wood, approx 40kg limited if hinges install at bot. but this job i don't know. 你做货用的木板实在太薄，像楼梯这种承重物最少用2英寸厚的松木或者1.5英寸的硬木去做，目测视频用的是1英寸的松木 这很不安全的。（1英寸2.54cm） 这种板正确使用也就40kg的承重保证，合页又装反了还用错活页 所以不出事算是运气。 出事不代表第一次上去就坏了，楼梯这种东西反复使用最少10年绝对安全是必须的。 3.Bad design for this room. block window and folding looks really stupid… Even want this kind of design and dont have window there, should make it more invisible like can hiddiing in to wall… or just 1/2 folding to the top… 设计非常不好，房间那里有个窗户，楼梯设计明显挡住，进墙只看到2根膨胀螺丝 木板太薄真的吃不住 稍微带点东西或者蹦哒一下就会出危险。 如果一定要做这种侧收的楼梯，最好是能收进墙里，收纳不应该用这种房间门用的不锈钢活页，这种活页2个的安全承重才只有一个木门（绝对安全的前提下）最少要用能承受钢门的大号承重活页。 室内那种空间布局，1/2对折从下折上去或者做上阁楼那种收缩梯才省空间美观。 4.Without talking design, this guy did fine job. At least made it, hope he can learn more craft work and do better. 整个流程做的还是可以的，至少最后东西拿出来是正的。 设计方面多学学吧 在UA-cam发木工视频的人很多，有很多做的非常好非常漂亮，都有一个前提就是“绝对安全的设计”，最少不能像这种活页打错 拿普通活页去承重。 确实看起来很amazing,因为我这样的业余爱好手工者也不会用绝对不够专业的部件去做需要安全要求的东西。 总之希望你能把你的手艺发挥更好，下次做好设计 用好部件。
Ι have to say that he put his mind to think and he did what he thought ... Τhis is very good ..Ιt is a good try. But i also have to say that there is a mistake . The right part of each rung is dangerous because it is not suported from the metal hinge . The screws can be easily unriped and there will be a disaster ,with the rungs been unriped the one after the other. There can be easily an accident . I have to say that i respect everyone who tries for the best. Good luck to everyone who tries
Dear friend idea is good, but what about people climbing up their should be few rails upward too. Any way work is good we can utilise it in different areas.
В трёх - четырех местах,под ступенькой, сшиваю катанкой 8мм гайками с шайбами обе стороны тетевы..верх,середина и низ..иногда добавляю ещё в двух местах ..
Só acho que as dobradiças nesse lado para cima é seja o mais correto, os parafusos podem não aguentar e acabar se soltando com o peso, o certo seria as dobradiças em baixo
DE ARGENTINA, ME ENCANTO ESA ESCALERA, CON BISAGRAS, QUIERO HACER UNA ESCALERA, DE DOS HOJAS, DE 3 METROS, QUE MEDIDAS, ME PODÉS DECIR. MUCHAS GRACIAS...
Lo peligroso de eso son las bisagras, tal vez el muchacho pese 55 kilos, pero yo peso 110Kilos y debo subir por ahi y voy pisando escalones que estan sostenidos por bisagras que solo toman con 3 tornilllos y cada pisada va tratando de aflojarlos. Creo para mi humilde opinion.
![Handcrafted 14-step Staircase. Always Struggle With the First and 13th Steps [Season4 - Part9]](http://i.ytimg.com/vi/SLh8N9YGUwY/mqdefault.jpg)
![Handcrafted 14-step Staircase. Always Struggle With the First and 13th Steps [Season4 – Part9]](/img/tr.png)
![[woodworking] Folding staircase for loft room](http://i.ytimg.com/vi/msQBw_ePoYc/mqdefault.jpg)
عاشت الايادي 👌👌👌👍👍👍 IRAQ
ارفع لك القبعة 🎩
ich hätte die Scharniere unten statt oben angebracht ,sieht schöner aus .👍👍👌👌
Если ступеньки болтами под 5 закрутить надёжней будет со временем от веса и деформации саморезы разбалтаются горя не не оберёшься а так хорошая идея если бы окна ещё не было то было бы супер
Superb👍👍👍👍👍👍👍👍👍👍
Gap yõq zõr chiqipdi
👍🏽👍🏽👍🏽😀😀😀
God gift talent beautiful wood working 🥰😍👌😍👌👌👌👌💯💯💯💯🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
nesesito una escalera plegable porfis domicilio cuanto sale bivo en quilicura país Chile
exelente las ecaleras
.
God? 🙈
Sir aap bhi is
Per video bnao Hindi mai with detels
MERITO A QUIEN LO MERECE 👍👍👍👍👍👍👍👍👍👍BENDICIONES
Wow keren👍👍👍
Good job.. 12:56 😊
Top demais parabéns 👏🏻👏🏻👏🏻👏🏻
Keren bos..sukses terus
Respect ❤
❤❤❤❤❤
Fantastik
Very good job!! from France 🇨🇵🇨🇵 💪🏾👌🏽👌🏽
Nice safety shoes😮
Perfecto muy bonita la escalera y muy práctica y fácil de hace 💯👍
🤔HeadsOff To Your Thought By Hart👌👍
A genius idea
Few problems 一些问题。
1.Hinges should install at bot not top, this is at least without talking other things.
合页应该装在台阶下面，这样螺丝才受力。不应该让受力方向和螺丝相反。 螺丝从上往下打，人从上往下踩 受力的只有螺丝的螺纹…
2.All timbers are really too thin, also use pine wood, approx 40kg limited if hinges install at bot. but this job i don't know.
你做货用的木板实在太薄，像楼梯这种承重物最少用2英寸厚的松木或者1.5英寸的硬木去做，目测视频用的是1英寸的松木 这很不安全的。（1英寸2.54cm） 这种板正确使用也就40kg的承重保证，合页又装反了还用错活页 所以不出事算是运气。 出事不代表第一次上去就坏了，楼梯这种东西反复使用最少10年绝对安全是必须的。
3.Bad design for this room. block window and folding looks really stupid… Even want this kind of design and dont have window there, should make it more invisible like can hiddiing in to wall… or just 1/2 folding to the top…
设计非常不好，房间那里有个窗户，楼梯设计明显挡住，进墙只看到2根膨胀螺丝 木板太薄真的吃不住 稍微带点东西或者蹦哒一下就会出危险。 如果一定要做这种侧收的楼梯，最好是能收进墙里，收纳不应该用这种房间门用的不锈钢活页，这种活页2个的安全承重才只有一个木门（绝对安全的前提下）最少要用能承受钢门的大号承重活页。 室内那种空间布局，1/2对折从下折上去或者做上阁楼那种收缩梯才省空间美观。
4.Without talking design, this guy did fine job. At least made it, hope he can learn more craft work and do better.
整个流程做的还是可以的，至少最后东西拿出来是正的。 设计方面多学学吧 在UA-cam发木工视频的人很多，有很多做的非常好非常漂亮，都有一个前提就是“绝对安全的设计”，最少不能像这种活页打错 拿普通活页去承重。 确实看起来很amazing,因为我这样的业余爱好手工者也不会用绝对不够专业的部件去做需要安全要求的东西。 总之希望你能把你的手艺发挥更好，下次做好设计 用好部件。
Good idea
😍🏵️🏵️🌹👌
Job well done...
Hebat bos
Paket
👍🏻👍🏻👍🏻 good job
Güzel bir seyyar merdiven olmuş peki katlanfoğında onu tutmasını püf noktası yada mandal neresinde
👏 saya pernah membuat yang seperti ini, namun tidak bertahan lama, karena kualitas kayu yang saya gunakan kurang baik
👏👏👏 Brasil🌎
You're the great ones.
Like it
Mantap2 boskuu👍
Top 👍
Memanjakan mata 😀
Luar biasa , kereativ sekali
obrigado agora sei como fazer a escada do mezanino do meu futuro cantinho ❤
Nice idea
Very nise
Mi ricorda la mia falegnameria più 30 ANNI di lavoro nei tempi
AMAZING 👍🏻
Ι have to say that he put his mind to think and he did what he thought ... Τhis is very good ..Ιt is a good try. But i also have to say that there is a mistake . The right part of each rung is dangerous because it is not suported from the metal hinge . The screws can be easily unriped and there will be a disaster ,with the rungs been unriped the one after the other. There can be easily an accident . I have to say that i respect everyone who tries for the best. Good luck to everyone who tries
Respectful comment. Congratulations.
@@Adricaros Thank you Adriano !
Inspiratif..
Parabéns trabalho maravilhoso...eu amei..e Deus abençoe....🇧🇷🇧🇷🇧🇷🇧🇷🤗🤗🤗👍👍👍
Bosta de serviço, um trambolho que não serviu pra nada
Eu que não subo num trem desse
Magnific,the beatiful working.👍
Awesome ⭐⭐⭐⭐⭐
Asa hayang nurutan euyyy...hade super ide cemerlang jang uingah
Петли должны быть внизу. Так надёжнее. Благодаря этому видео я пришел к такому выводу.
Great work
Keren mantap 😁👍
Kalau begini yang mengerti perkerjaan bangunan bravo
SUPER KREATIF Sukses GBU
Merci pour tes explecations
Falta un es ca lon
Peldaño
Grada
Pero con accesorios seguros y de adecuada seguridad
BUENA IDEA
GRACIAS 😊
فنان بمعنة الكلمة
Keren
Like 👍👍👍👍👍
Awesome
👍🔥👍
Dear friend idea is good, but what about people climbing up their should be few rails upward too. Any way work is good we can utilise it in different areas.
Mantab dan inspiratip
Cool
Tak takovou nesmyslnou konstrukci jsem ještě nikdy neviděl.
que legal eu quero uma dessa porguato você faz uma escada desa
Eu quero uma dessa mesma de u seu ZAP umeu é 984032012
Namanya juga usaha... tjakeps atuh. Cuma penempatannya harus lebih tepat
Show 👏👏👏
My toxic trait is saying I can do this within a day.
Awesome 👏
Awesome build of a ladder but why a folding ladder when
a regular ladder would of worked just fine ?? Lol 😂 😂 😂
В трёх - четырех местах,под ступенькой, сшиваю катанкой 8мм гайками с шайбами обе стороны тетевы..верх,середина и низ..иногда добавляю ещё в двух местах ..
Maybe I would have made the stringers or the sides out of thick rope ,attach them to the floor and wall.maybe it would fold out of the way better?
Pekerjaan yang luar biasa
Hi Boys 😍💋 💝💖♥️❤️
❤
Very nice
Love this
Só acho que as dobradiças nesse lado para cima é seja o mais correto, os parafusos podem não aguentar e acabar se soltando com o peso, o certo seria as dobradiças em baixo
Tem a questão do corrimão tambem.....
Bagus bosku
DE ARGENTINA, ME ENCANTO ESA ESCALERA, CON BISAGRAS, QUIERO HACER UNA ESCALERA, DE DOS HOJAS, DE 3 METROS, QUE MEDIDAS, ME PODÉS DECIR. MUCHAS GRACIAS...
Genial
Too good
La idea es magnifica pero le falta un suplemento en la parte de la pared para que plege mas. Bendiciones buentrajo desde COLOMBIA.
Lo peligroso de eso son las bisagras, tal vez el muchacho pese 55 kilos, pero yo peso 110Kilos y debo subir por ahi y voy pisando escalones que estan sostenidos por bisagras que solo toman con 3 tornilllos y cada pisada va tratando de aflojarlos. Creo para mi humilde opinion.
Excellent skill transcends language!
👍
Muy bueno fantastic
wow,,,excellent...
Seems like a good idea but in the end does not save a great deal of space
Cuối cùng có xếp hết cầu thang không?
Boy that first step at the top is brutal .
How do these videos get the attention they do ?
I wouldn't trust those steps for anything.
1st step is like a diving board.
They say on a spiral staircase it's not easy walking on the inside, in this case it's a possible set of broken legs
Great nyt, Sweet Dreams.
Beautiful idea, l like it.
Начинали бы уже с лесозаготовок.
Ne jama yr .
Geial me encanta maravilloso
Estamos apremdemdo boa noiti
Excelente...
not great, not terrible
Braaaaavo
Fix ngabisin kuota
Que buen trabajo realmente digno de ser como tiene que ser las cosas felicitaciones...
Жидковата лестница как всё китайское и крутовата