@@gothenburgbastards3095 Underneath the covered panel, there's a bunch of metal relays that look like bent metal, just clean those pieces of metal and you should be ok. Also, my blade was off track, my staff fixed that in a few seconds.
Creation ctn630 muje apse command ic k bary main pochana hai U-19 ye konsa number ka ic hai main board main dekh kr bta dijey plz I really need it.thanks
Redsail plotter can support windows system, both of computer and laptop, when you run the plotter and software, it is sugested to quit virus protection.
I cant get this cutter to cut properly for nothing. I have adjusted the blade, ive adjusted the pressure and i either get one or two I can get it to cut but the blade drags or i cant get it to cut at all -Test square not deep enough. Adjusted blade, adjusted holder, adjusted pressure. Cut/plot: material size is not 24" it is 13.780. Says R19, should be R31.
Hi friend, regarding for the length of blade, if you cut the sticky vinyl, it is recommended that the blade protrude the blade holder about 0.5mm, it means you only can feel it with your finger. If other materials, tip length is 2/3 of the material to be cut, if too long, the material will be cut bad, too short can not cut through, you can try more than once. The distance from the white guard strip to the tip of the blade should be kept at 2mm-3mm. For the setting of speed/pressure, cutting different materials and different file sizes, the requirements are not the same, can not be generalized. For example, if you cut the common vinyl, larger than 2cm of the letters, at a speed rate of 500-600mm/s and the pressure setting at 200-250g will be ok. If the letter is smaller than 2cm, in order to ensure the precision and suggest that set the speed at 25-50mm/s. Any other questions, please feel free to contact us at sales@signcut.ca.
@@azaid79 www.bestcutters4u.com/Support Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
Hello Sir, i assume you means the Cutmate dongle compatible with Redsail cutting plotter, if you own it, please email us at sales@signcut.ca for help, if you want to order it, welcome to place order in our ebay store via www.ebay.ca/itm/264348622898, thanks.
www.bestcutters4u.com/Support Please find the Support--USB Driver for your Redsail Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
Hello Shimmy, please watch the video carefully, it will show you how to install and set up the Artcut and plotter. Or you can email us at sales@signcut.ca.
Please go to the link to download the USB driver for the plotter, www.bestcutters4u.com/Support Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER".
You make it so easy for us beginner
Thanks. Was able to set up mine and cut.
thanks i really needed this
It is useful vid thanks to discover this vid 🤗
USB DRIVERS LINK PLEASE
Link brother
Alguem tem o link do driver dessa maquina? to precisando urgente
Can able to tell about price and where doing get this machine
hello, good evening, do you have distributor here in the Philippines?
Do you send me a software for this mashine please 🙏
Sir I need the redsal USB driver
drivers download please?
VERY HELPFUL THANKS
Please provide usb driver links redsell
I want to Redsail Flotter software drive
REDSAIL 720 c how to cut 3mm reflective sticker cutting forces
redsail RS720 CUTTIN PLOTTER IS LETTERS CUTTING BUT LETTER CUTTING LAST & FIST CUTTING POINT NOT CUTTING WHAT TO DO PLEASE TELL ME
Hi friend, please take a video or some pics for this issue and email us at sales@signcut.ca, we will try our best to help you out.
Mahesh Sir please help me. mera red sail plotter cutting mae problem ho rha hai achanak.... My contact no 8723952921...plotter is in warrenty
@@signcutinc.4069 Please help me i faced a problem regarding cutting in red sail plotter
Hi dear, you can email us to info@bestcutters4u.com to get more help. Thanks
@@signcutinc.4069 what art software can I use because the Artcut software that was sent to me with the plotter dose not work with my laptop.
Please provide the redsell cutting plotter usb driver linkh download
my redsail machine is not working usb cabel i allrady install usb driver
So much times I try but not working with USB than I change to port
Can you give some advice, my does not do a test cut nor move to the left, its stuck at the start position. thanks
Hi friend, please email to info@bestcutters4u.com or WhatsApp via +86 15908080893 to get more help. Thanks
@@signcutinc.4069 I finally figured it out after watching another video, its a relay that needed cleaning.
@@HeavenReservation Ok, dear, so glad to hear that, any questions, please feel free to contact us.
@@HeavenReservation what kind of relay? I have the same problem as you did. Please help me!
@@gothenburgbastards3095 Underneath the covered panel, there's a bunch of metal relays that look like bent metal, just clean those pieces of metal and you should be ok. Also, my blade was off track, my staff fixed that in a few seconds.
Mere machine kuchh problem aa gyi h bta skte h m nyaa user hoo
रेड़सेल की भी चलेगी
I want this machine
linking usb to my laptop is not working I need help
Hi
Dennis, you can email to info@bestcutters4u.com to get help.
Can i get the connection wire?
the driver cannot be installed ... still in conflict
redsail me me ek poblem aati h jo latter cuting me thoda sa raah jata h latter nikalne me dikkat hoata h edka koi hal ha to baatao plz
Hi
, you can email to info@bestcutters4u.com to get help.
Difference between cameo and redsail plotter M
रेड़सेल का कोई इंजीनियर है क्या महाराष्ट्रा में
Creation ctn630 muje apse command ic k bary main pochana hai U-19 ye konsa number ka ic hai main board main dekh kr bta dijey plz I really need it.thanks
Sorry? Any questions of plotter, welcome to email us at sales@signcut.ca. thanks
Please provide usb driver links
Do you need?
Bhaiya apka 7.6 Ka video dekha hu aap jaishe kiye ho waishe me mere se nahi ho raha kya aur kya karna karna hoga kaishe karu plz batao bhaiya
Sorry 7.5 Ka
I want to know about hola to attach in glass
Please email us at info@bestcutters4u.com to get help, thanks.
Hello sir can u give that driver
Es redsail ko chalane ke lia konsa laptop aur konsi anty virus ki jarurat parege jara details ME bataea
Redsail plotter can support windows system, both of computer and laptop, when you run the plotter and software, it is sugested to quit virus protection.
Really can we operate with LAPTOP?
REPLY PLEASE
Hi dear, yes, it can work with Laptop with Windows.
Yes, it can work with laptop, both win7 and win10.
@@signcutinc.4069 but mam its works very slow on usb connection
@@plotterclinic4885 Hi, maybe it's the problem of your computer, you can change another one to try.
download link for artcut..
Hi, we are selling Artcut software, welcome to place order in our ebay store, www.ebay.com/itm/282046460234.
I cant get this cutter to cut properly for nothing.
I have adjusted the blade, ive adjusted the pressure and i either get one or two
I can get it to cut but the blade drags or i cant get it to cut at all
-Test square not deep enough. Adjusted blade, adjusted holder, adjusted pressure.
Cut/plot:
material size is not 24" it is 13.780.
Says R19, should be R31.
Hi friend, regarding for the length of blade, if you cut the sticky vinyl, it is
recommended that the blade protrude the blade holder about 0.5mm, it
means you only can feel it with your finger. If other materials, tip
length is 2/3 of the material to be cut, if too long, the material will
be cut bad, too short can not cut through, you can try more than once.
The distance from the white guard strip to the tip of the blade should
be kept at 2mm-3mm.
For the setting of speed/pressure, cutting different materials and different file sizes, the requirements are not the same, can not be generalized. For example, if you cut the common vinyl, larger than 2cm of the letters, at a speed rate of 500-600mm/s and the pressure setting at 200-250g will be ok.
If the letter is smaller than 2cm, in order to ensure the precision and suggest that set the speed at 25-50mm/s.
Any other questions, please feel free to contact us at sales@signcut.ca.
I followed same but finally sjow one error can i contact you?
Yes, if possible, please email me at sales@signcut.ca, we will try our best to help you out.
do you own the software for sale?
How to connect redsail ploter with ftdi usb driver?
plz i need RS 720 Ploter USB driver win7, 32bit
www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
Flexi7.5 softweare se chalega
Redsail Vinyl cutters support the Artcut, WinPCSIGN, FlexiSign, VinylMaster, SignCutPro and other most of sign making software.
window 10 mai nahi chalta hai kya
विंडो 10 चला सकते हैं
need drivers for redsail wont connect to my laptop
same problem
www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
@@azaid79 www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
I need an Easy Cut 60 driver
Hi friend, we only have the USB driver of Redsail cutting plotter, you can go to the following link to download it www.bestcutters4u.com/Support.
sir redsail cutter run karta hu to no dongle error data ha please help me
Kitna price h bhi yeska
Hello Sir, i assume you means the Cutmate dongle compatible with Redsail cutting plotter, if you own it, please email us at sales@signcut.ca for help, if you want to order it, welcome to place order in our ebay store via www.ebay.ca/itm/264348622898, thanks.
Red cutting plotter keyboard me masla Aya Hi
Please give me download link flexisign pro 8.1
Hi friend, we only sell original software winpcsign.
Bhai AI machine ka setting hai kya
Hi Sheikh, this is the demo video for Redsail 24" plotter with 341 driver, you can contact me via WhatsApp +0086 15066697601.
Price
thank you
Can I able to write 0.1 inch font size using vinyl pen plotter?
Yes, it's no problem for Redsail plotter to cut/write 0.1 inch font.
raidsail driver sotware for in
salation plse send link
www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
Is Windows xp drivers available, please help.
mashing ki speed kyse bdaya jata h
Please click online, and then hit "S+" to change the speed.
Thanks
Boa tarde possue o software para venda?
Hi friend, please email to info@bestcutters4u.com or WhatsApp via +86 15908080893 to get more help. Thanks
Цена?
usb drivers need
www.bestcutters4u.com/Support
Please find the Support--USB Driver for your Redsail Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
what is this audio
Price kya h
Hello, may i know your email address or WhatsApp? My WhatsApp number is +0086 15066697601. I will send you the offer and machine details. thanks
The countdown is unecessary
Thanks for your suggestions, dear friend.
Bhai plzzz help krdo n
Wow
Sir,resail machine me ruk ruk kar cutting ho raha jo cutting me bahot bahot jyada late ho raha hai solution btaye..
You can email us at info@bestcutters4u.com to get help.
tengo un redsail RS450C y no puedo hacer que funcione con arcut!
Hello Shimmy, please watch the video carefully, it will show you how to install and set up the Artcut and plotter. Or you can email us at sales@signcut.ca.
What price range of this machine?
Hi Vivek, may i know your email address or Whatsapp? I will contact you soon, my Whatsapp number is +0086 15066697601.
किसी के पास pI की मशीन है क्या बिक्री की
Mae sikhvu che
Bhai meri bhi yahi paresaani hai
USB derae bar kha she downlod kare
Hello friend, any questions for the plotter and video, please feel free to contact us at sales@signcut.ca.
pls givi mi usb drivrs
www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER".
No proper works in flexising pro have u any solution
bhai muje ye machin ke driver muje chahi ye bhai help karo
Muje machine chahiye kaha par milega
Please go to the link to download the USB driver for the plotter,
www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER".
Please email us at info@bestcutters4u.com to get help, thanks.
Aap kaha ho merai hy
who much 4 feet ploter new
?????????????
Hi Anas, may i know your email address or WhatsApp? My WhatsApp number is +0086 15066697601. I will send you the offer and machine details. thanks
@@signcutinc.4069 price
Driver
www.bestcutters4u.com/Support
Please find the Support--USB Driver for Cutting Plotter, and then choose "USB Driver--CH341SER" or "USB Driver--FTDI".
Hii
Hi Anil, any questions, you can contact me on WhatsApp via +86 15066697601.
7
Horrible vinyl cutter. Static constantly causes failed prints and wasted time and money in vinyl .... AVOID this unit
Thanks