Yet again the best description of a set up on UA-cam. I’ve been in the hobby for a short while - learnt to fly on an Arrows Bigfoot and recently bought an F86 - the amount you have taught me and the sheer reduction in stress you provide is gold! Many thanks again from the UK 🇬🇧 ✈️ 😊
I think you are asking can the Vector system be moved or used in the NX6 . Yes the Vector system can be used with any receiver or transmitter It just needs to have a 3 position switch to be operated from. As far as moving it to a different plane, I truly dont know. It is my understanding that all vector systems, like the reflex system are tuned to the planes they are sold with!
Great looking plane my man! I'm absolutely getting that UMX turbo timber, it will be my 1st 6 channel. My sister has it! Thanks for recommending & pleasant skies my friend!
Great explanations. I am waiting on a Arrows T-33 to do the similar set-up. One question, How do you change the order of the selections on the Vector switch? I'd like Top is Self-leveling, Middle is Gyro and Bottom as Nothing. Thank You
Maybe you can help me. I have a vector system for an Edge 540 but cannot get the throttle to work. The esc works because I tried it with a rx by itself. I’m running spektrum so I plugged the throttle from the vector into the receiver channel 1 which is throttle in my radio but no matter what I do it won’t work. Any ideas?
Run throttle from ESC directly to RX. There is a SBUS lead from your Vector plug that into any open port on your RX and assign it to a 3 position switch on your transmitter. Vector does not to have the throttle lead to work.
i dont trust arrows rc CG recommendations cause on the T-33 shooting star they were off about 20mm i ended up at 65mm on my T-33 and it flew perfect there...
Thanks, I stopped flying for 3 years. Started back, this jet looks like what everyone is flying so I bought it. I didn't realize it had no RX. I really didn't expect it, most of these types of jets have everything you need except Lipo & radio; well they use to. That's where the 3 years comes in. No big deal I'll order on or cannibalize one from another plane. So I realized I need to pay attention and read, I hate reading I just want to fly. Now I still don't have to read because when I get the RX I need I'll just follow your video...hay I can't go wrong there. I am not sure how you get all those planes into that little space unless there is more I can't see. Nothing like a shop full of planes. In the past everytime a box came my wife would say " How many planes do you need " I took her to her closet and point to her shoes and said.........you get it. Now 25 years later, nothing, she just asks me if I remembered to take the trash out. So thanks for the video, big help. Do you have the Eflite 80mm F16, I was thinking of getting that one also. I need to hurry up and match the number of shoes my wife's has....
Ok gang, as promised the RADIO, VECTOR (gyro system) and BIND SETUP from me Fat Guy Flies Rc.
Yet again the best description of a set up on UA-cam. I’ve been in the hobby for a short while - learnt to fly on an Arrows Bigfoot and recently bought an F86 - the amount you have taught me and the sheer reduction in stress you provide is gold! Many thanks again from the UK 🇬🇧 ✈️ 😊
Thank you so much!!!
@@FatGuyFliesRC You’re welcome!
Thanks for the info on channel assignment!
Any time!
Nicely explained ! Thank you!
He's a great guide, teacher, & pilot, I agree!
You are welcome!
Very kind!
Thank you sooooo much! Searched for hours to try to figure this out and should have just come here first. Thank you sooooo much!
Glad to help!!!
Excellent, clearly described set up. Thank you. Looks a decent plane.
Glad you liked it!
So this vector system is in the trekker. So this can be set up the same on the Nx6 with the vector flight stabilization
I think you are asking can the Vector system be moved or used in the NX6 . Yes the Vector system can be used with any receiver or transmitter It just needs to have a 3 position switch to be operated from. As far as moving it to a different plane, I truly dont know. It is my understanding that all vector systems, like the reflex system are tuned to the planes they are sold with!
good info friend
Glad you liked it
Thanks Big Guy !!! Got my mods to finish up then setup and build. Give us a gyro turning radius lap on maiden.👍🏻✌🏻🖖🏻
Will do. Going to maiden today the 10th....very excited!
Great looking plane my man! I'm absolutely getting that UMX turbo timber, it will be my 1st 6 channel. My sister has it! Thanks for recommending & pleasant skies my friend!
Right on! You will enjoy that bird. Get at least 4 batteries because you are not gonna wanna stop flying!
I wonder if the freewing f-86 has the tank problem with the flaps? I want to set up flapperons so I can have a higher rate of roll.
No idea on the Free wing but with my flaps down 75% they almost touch.
The basic setup you did, would that be pretty much the same on a nx6?
Exactly the same.
Great explanations. I am waiting on a Arrows T-33 to do the similar set-up. One question, How do you change the order of the selections on the Vector switch? I'd like Top is Self-leveling, Middle is Gyro and Bottom as Nothing. Thank You
Thanks and yes that is the order they come in. You cannot alter that.
@@FatGuyFliesRC Thank You
Can I set up thrust reverse?
Maybe you can help me. I have a vector system for an Edge 540 but cannot get the throttle to work. The esc works because I tried it with a rx by itself. I’m running spektrum so I plugged the throttle from the vector into the receiver channel 1 which is throttle in my radio but no matter what I do it won’t work. Any ideas?
Run throttle from ESC directly to RX. There is a SBUS lead from your Vector plug that into any open port on your RX and assign it to a 3 position switch on your transmitter. Vector does not to have the throttle lead to work.
Greg....please fly manually and in Vector when at the field. Please kind sir. Keep on Flying in the Free World !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Will do. Going to maiden today the 10th....very excited!
Yes sir.
Thanks for understanding.
FG, If I use an AR620 will the Vector system provide self leveling or do I need a AR630 receiver with safe?
i dont trust arrows rc CG recommendations cause on the T-33 shooting star they were off about 20mm i ended up at 65mm on my T-33 and it flew perfect there...
I put a 1800 back a bit and she flies spot on.
@@FatGuyFliesRC Spot on to the the specs arrows suggest?
Thanks, I stopped flying for 3 years. Started back, this jet looks like what everyone is flying so I bought it. I didn't realize it had no RX. I really didn't expect it, most of these types of jets have everything you need except Lipo & radio; well they use to. That's where the 3 years comes in. No big deal I'll order on or cannibalize one from another plane. So I realized I need to pay attention and read, I hate reading I just want to fly. Now I still don't have to read because when I get the RX I need I'll just follow your video...hay I can't go wrong there. I am not sure how you get all those planes into that little space unless there is more I can't see. Nothing like a shop full of planes. In the past everytime a box came my wife would say " How many planes do you need " I took her to her closet and point to her shoes and said.........you get it. Now 25 years later, nothing, she just asks me if I remembered to take the trash out. So thanks for the video, big help. Do you have the Eflite 80mm F16, I was thinking of getting that one also. I need to hurry up and match the number of shoes my wife's has....
Love the story, sounds very familiar....lol. No I do not have the 80mm F-16.....yet. And your most welcome.