Roland FA-06 Black Limited Edition | Connecting to The Akai MPC X using USB MIDI

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 244

  • @MirekEm1
    @MirekEm1 4 роки тому +17

    First man who explain how to merry MPC with FA. Super!

  • @vjretro
    @vjretro 8 днів тому

    Thanks Bolo. I successfully hooked up my MPC X with my FA-08.

  • @TeleporterM11
    @TeleporterM11 3 роки тому +6

    Thanks Bolo I just hooked up my Mpc x and Fantom. I never knew they could work together in this way. Knowledge is power. I subbed to your page keep up the good work.

  • @vuduhgazzi4364
    @vuduhgazzi4364 Рік тому

    Thank You Brother. I was looking all over. I had seen your Korg Krome EX video. I am using that with this same method. Once I turned off that local everything is working fine. Ready to roll. You the man My G!

  • @THEREALTWISTEDINSANE
    @THEREALTWISTEDINSANE 2 роки тому

    Bolo I got a question , when I export my files to load into pro tools , the sounds from the Roland are not exporting , when I load the exports into pro tools only the mpc sounds like drums and whatever sounds I have on the mpc export but the roland sounds do not , how do you get them to export ?

  • @EllzTheEnginEar
    @EllzTheEnginEar 6 місяців тому

    That lsb program change is a life changer. I’m starting to use that on my Arturia minifreak with the live 2

  • @quixsand
    @quixsand 3 роки тому +4

    Of course your video is the only one that makes sense. Thank you BDP. Unfortunately the new update only supports 44.1khz sample rate. I own a Korg Kronos and an Allen & Heath QU-32 mixer. Both units only transmit at 48khz. I hope Akai will upgrade soon to support the higher rate.

  • @1980VINZ
    @1980VINZ 3 роки тому +5

    9:20 the +/-1 number is due to the fact that on the MPC, bank numbers start from 1, but on synthesizers, the banks start from 0.....

  • @habemusfyah
    @habemusfyah Рік тому

    Tks! Does that means you make a template so you have 16 sounds and use mpc sequencer ? So I have a set I can lay down ideas quickly with the fa as a sound module and keboard.

  • @THEREALTWISTEDINSANE
    @THEREALTWISTEDINSANE 3 роки тому +1

    I need to figure this shit out ,I have a kronos, been tryin to dothis shit over a year smfh, I got it recording the kronos sounds but it wont record them thru the whole sequence, after about 2 bars everything I recorded into the mpc is blank. If I play a piano for 8 bars on playback it only plays about 2. And I cant figure out how to have it coontrol the mpc sounds without playing the kronos sounds ........fml

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому

      You have to turn off “Local control” on Kronos so it won’t play sounds until is assigned.

    • @THEREALTWISTEDINSANE
      @THEREALTWISTEDINSANE 3 роки тому

      @@BoloDaProducer I did

    • @THEREALTWISTEDINSANE
      @THEREALTWISTEDINSANE 3 роки тому

      Still doesn't work properly, so I switched to the roland jd xa.....same thing , when O record an 8 bar sequence starting from the beginning it only plays back around half , then I get long ass wild notes

  • @Parialated
    @Parialated 2 роки тому +1

    Bank msb/lsb is a gamechanger!!

  • @kendricksales4676
    @kendricksales4676 7 місяців тому

    Brother this was truly a help I run a Casio and I think I can do the same thing with a Casio thanks a million

  • @datzbeewild
    @datzbeewild 3 роки тому +2

    Bolo, is your sampler input set to in? I am not hearing any sound without either a audio track set to in or sampler input set to in.

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому +1

      I have in on track input monitoring. Mine was doing the same. I’ll most likely me a full video on my subscription page on how to do it

    • @gerrodhudson9052
      @gerrodhudson9052 3 роки тому

      I am not able hear any sound coming out of the mpc headphones. I can see that input and output on the mpc when I play my keyboard.

  • @DoeCDoeTV
    @DoeCDoeTV 4 роки тому +1

    Thank you! I’m hooking everything up right now as I type! But I don’t have 2 end usb so I gotta use midi for a day or two 😂

  • @braintraxmusic
    @braintraxmusic 3 роки тому +1

    Dope vid! I have an mpc live 2…..followed all the steps, but I have no sound coming through the mpc when I play the fa 6. I can see something happening with the feedback and can hear the recording play back. But can’t hear any sound or metronome click sound through my headphones

  • @antagonistODB
    @antagonistODB Рік тому +2

    Hey Bolo or anyone when I hit strings and other buttons on my F06 it controls stuff on my MpC one what am I doing wrong.

    • @BoloDaProducer
      @BoloDaProducer  Рік тому

      Make sure it’s in slave mode

    • @antagonistODB
      @antagonistODB Рік тому

      @@BoloDaProducer my phantom says internal, remote and external. I think external would be the slave right?

    • @antagonistODB
      @antagonistODB Рік тому

      Figured it out my MPC program change setting was on. Thanks for the videos

  • @davidneau8830
    @davidneau8830 Рік тому

    Thanks for your video. I've had a problem, there was nos sound from my roland. And i found where the problem was, the sampler wasn't on "on" (I find the solution on a AveMacRee vid). Hope it will help the one who meet this problem. Your tuto was very clear and it was so simple to do it with your tip. Thanks again.

  • @antoinepope9235
    @antoinepope9235 9 місяців тому

    Have you ever had to do maintenance on your MPC X and how did you handle it

  • @gamerjerome
    @gamerjerome 3 роки тому +2

    For some reason I couldn't get this to work. Although I don't know what your midi settings are on the FA-06. I have the FA-07. I set everything the same but didn't hear anything in the midi track. I'm running my FA out to a mixer then back to the MPC. If I turn "off" Local Switch on the FA and go into Sample on the MPC and turn on the input, I can hear my keyboard. So the sound is getting back to my mpc. I even tried going directly from my FA to MPC , still no luck. What are your FA midi settings?

    • @MusicWizard85
      @MusicWizard85 2 роки тому

      Did you ever find a fix? I have FA07 and Live 2, same problem...everything hooked up right via USB cable but no audio coming out when I play FA07 keys.

  • @AdrianCardenas-x7z
    @AdrianCardenas-x7z 9 місяців тому

    Bolo great tutorial. I want to do the same with the Dgx-670 any help . Thank you

  • @AGBAK
    @AGBAK 4 роки тому +4

    BOLOOOOOO😂😂. You did it Champ 👍🏾👊🏾. Thank you. The issue was with the MSB & LAB Banks. Now I can sequence sounds on multiple midi channels. Great tutorial ⭐️⭐️⭐️⭐️⭐️

  • @j3m3r3
    @j3m3r3 2 роки тому

    Wish I got the black edition.looks so sweet. But sir you are a Professor. Thanks for sharing your expertise.

  • @drewhjava
    @drewhjava 4 роки тому +5

    I never knew that about the banks and program ch! I've been saving the session in the fantom and in mpc and having to line up by the project name. How do you find out the Bank MSB and Bank LSB numbers? Edit: Never mind didn't finish video yet. haha.

    • @BoloDaProducer
      @BoloDaProducer  4 роки тому

      You can find his documentation for any keyboard online

  • @roderickalbus5818
    @roderickalbus5818 7 місяців тому

    I have the exact same setup. However, I’ve been trying to also connect my iPad through the midi in/out ports of the Fantom to also use the sounds of the iM1 Korg app… It’s connected but don’t know how to route the audio from the iPad back to the Fantom… Audio is coming out of the iPad. Any help is highly appreciated!

  • @alexlouismusic
    @alexlouismusic 2 роки тому

    watching this on repeat especially starting at 4:44

  • @MirekEm1
    @MirekEm1 4 роки тому +2

    One question, how to make a song from MIDI FA Tracks? When I try to use "Export >> As audio mixdown" my *.wav is empty. Help. I'm MPC Studio Black and MPC Software user. (I use mixer with USB audio device - all is fine when I'm play tracks)

    • @BoloDaProducer
      @BoloDaProducer  4 роки тому

      You still have to export the audio from keyboard directly into Daw or MPC X first. It doesn’t bounce sound from keyboard automatically like sounds that are already in MPC

    • @braintraxmusic
      @braintraxmusic 4 роки тому

      @@BoloDaProducer what stand are you using for your equipment?? Dope vid. I just got the fantom 6 to go along with my live 2

    • @jamesonvparker
      @jamesonvparker 3 роки тому

      @@braintraxmusic I’m looking for this too. That stand.

    • @DisInfoWars
      @DisInfoWars 3 роки тому +1

      @@BoloDaProducer What's the best way to capture the audio from the Roland. Do you sample it into the MPC while the midi notes are being triggered by the MPC?

  • @jaybeetdown
    @jaybeetdown 2 роки тому

    How do you feel about the Upgrade to this FA, the new 2022 FANTON 0?

  • @herbertscott9460
    @herbertscott9460 3 роки тому +2

    Bolo, where did you get that bracket for your MPC x to stand above the desk?

  • @gradybeats83
    @gradybeats83 3 роки тому +1

    Just subbed!
    Just bought a Yamaha MODX8 and trying to sync my MPCX!!!

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому +1

      Good luck, I got rid of my Modx 2 twice. It connects but it’s a pain to get it working right. That’s why I got the FA-06

    • @gradybeats83
      @gradybeats83 3 роки тому

      @@BoloDaProducer no problems so far...
      But your info is invaluable bro!!!

  • @sugakaneofthaunda7515
    @sugakaneofthaunda7515 Рік тому

    That's a dope idea way of saving and I remember we used to have to load them in manually when we used the sound modules. What category do I look under in my JunoDs88 to find the Msd and LSD patch bank numbers?

  • @didierbouville4335
    @didierbouville4335 Рік тому

    A timely tutorial. THANKS. My Nord Lead A1 is impatiently waiting for its MPC One to communicate in midi, and keep (memorize) its sounds (program changes) in each sequence. Am I okay there?

  • @MrKartyair24
    @MrKartyair24 2 роки тому +1

    Hey wassup Bolo, I really need you to get back to me on this one man... I Recently bought a Roland FA-07 to go along with my Mpcx, I followed along with all of your instructions on how to pair the two devices. But for some reason I still can't get the audio from the Roland to come through the Mpcx.. Some advice when you get a chance would be very much appreciated big guy.... Thanks in advance...

    • @BoloDaProducer
      @BoloDaProducer  2 роки тому

      Make sure in each track the record button on MPC is on. And make sure audio monitor input is set to Auto

    • @MusicWizard85
      @MusicWizard85 2 роки тому

      I'm having the exact same problem with my Roland FA07 and MPC Live 2. I hooked them up EXACTLY like Bolo does...made sure all the settings were correct on both devices. I get nothing! I see the level bars going up on the MPC but there is no audio. I know it's probably something simple but so far no luck.

  • @mrlotto32
    @mrlotto32 2 роки тому

    Have you done a video explaining converting the midi tracks from the FA-06 to audio tracks in the MPC?

  • @David.est1998
    @David.est1998 2 роки тому +1

    Did the USB cable come with the Rolans FA06?

    • @BoloDaProducer
      @BoloDaProducer  2 роки тому +1

      Yes

    • @David.est1998
      @David.est1998 2 роки тому

      @@BoloDaProducer So can i add a guitar, microphone and a vinyl player easily as well?

  • @crackflush
    @crackflush 2 роки тому +1

    Good video. What’s the name of that stand?

  • @michaelrichardson2107
    @michaelrichardson2107 3 роки тому +1

    Dope good looking out word

  • @gerrodhudson9052
    @gerrodhudson9052 3 роки тому +1

    Thanks for the video. I have followed every step to the T. But I can’t get any sound from the mpc when I am using the midi channel? I do see the signal light for input and output working when I press keys on the key board. I can also go to another track within sequence and I hear Audio coming from my speakers and headphone, so Audio is working for the mpc. Lastly if I plug my headphone in my Roland, I can hear Audi coming out.
    It just I can hear any Audio from the midi track no matter what channel I go to!? What am I doing wrong please...

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому +1

      Make sure the gain 1and 2 jobs are turned up. If you got it plugged into 3/4 make sure that knob is turned up. Make sure the main and direct knob is in the middle. Make sure on track the record button is red and says Auto underneath. If those don’t work. We might have to do a one on one, but I charge for that.

  • @parham101k
    @parham101k 2 роки тому

    saved the day, thank you. what kind of stand is that?

  • @foyjustice7212
    @foyjustice7212 2 місяці тому

    Can this be done with a Roland gaia sh-01 and mpc one? Not as fancy of a keyboard but I jam with it.

  • @mohammedrafeir9302
    @mohammedrafeir9302 Рік тому

    Dear Sir,
    I recently purchased the Rowland FA 06 Keyboard and have encountered an issue with some of the buttons not functioning properly(Enter Exit,Shift, up,Down,left, right,Dec and INC). I kindly request your assistance in resolving this issue. I am unsure if these buttons require specific settings to be assigned in order to function properly. Could you please advise me on how to resolve this issue?
    Thank you for your attention to this matter.
    Kind regards,

  • @das196699
    @das196699 3 роки тому +1

    Man I just wanted 2 say thanks 4
    Being there, I have the original roland fa 06 and I'm about 2 cop the mpc one gold edition, I'm soooooo excited about this information, salutes sir big ups 🔥💵🎵🎸

  • @jayjohnson9894
    @jayjohnson9894 Рік тому

    Bolo, you remind me of a physics instructor I once had, after explaining a formula, "see, that was easy enough, right"
    We're all looking at another, what did she just say 😳 🤣🤣🤣🤣

  • @tireewatson6737
    @tireewatson6737 3 роки тому

    How can I hook up my keyboard using midi cable's. I have a Casio wk-1300 and I have a MPC ONE

  • @saucemoneybeatz1977
    @saucemoneybeatz1977 2 роки тому +1

    dope work bolo

  • @untouchCR
    @untouchCR 2 роки тому

    How do I separate my midi tracks ,example Roland Piano , track 2 Roland bass. Cause I change track add midi program but it stays on the same midi track a changing sound changes the original recorded sound, can you help?

  • @MadACeTeeMack
    @MadACeTeeMack Рік тому +1

    @Bolodaproducer can the pads trigger the keys in USB midi?

    • @BoloDaProducer
      @BoloDaProducer  Рік тому +1

      Yes

    • @MadACeTeeMack
      @MadACeTeeMack Рік тому

      @BoloDaProducer Thank you my brother 💪🏽❤️❤️❤️. You have the only video that explains this thoroughly Bro. Many many many Big thanks 😊 💯

  • @splattdaddydog1041
    @splattdaddydog1041 3 роки тому +1

    Best video yet thanks bolo

  • @andrewwilliams7643
    @andrewwilliams7643 3 роки тому +1

    Will these same steps work with the Roland Fantom 6 and the MPC one

  • @mr.k-lon5224
    @mr.k-lon5224 4 роки тому +1

    Appreciate your videos I have a new MPCX I followed your directions , I have one problem in computer mode recording will only allow me to do 4 bars and stop recording when I hear it in play back it only goes to 4 bars when I have set it for 8 or more , in standalone it's all good, is there some setting in the software that I can change it.

    • @BoloDaProducer
      @BoloDaProducer  4 роки тому

      That’s weird I’ll look into it if you can figure it out

  • @N3na100
    @N3na100 3 роки тому +1

    Hi ,,,also do I use stereo or mono jack leads ,,,thanks

  • @beatnbiscuit1
    @beatnbiscuit1 4 роки тому +1

    Thanks Brother I have a Roland Jenn hope it works .

  • @deejayroby09
    @deejayroby09 2 роки тому

    Hey big bro, I need your help..I have a mpc one and just got the Rolland fa 06. I watched your video on connection however my Rolland is not coming up on the mpc. Can you help me out?

  • @Royalbase718
    @Royalbase718 11 місяців тому

    Can you do a video with the mpc x and the korg kross 2 I having trouble.

  • @IMakeBeats
    @IMakeBeats 3 роки тому +2

    Cool video 👍🏾

  • @samd79
    @samd79 3 роки тому +1

    Everything worked fine except I can't adjust the volume of the Fantom 6 with the MPC. Would i assume tmu can only adjust the volume of the midi notes with the Fantom?

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому +2

      You can adjust channel volumes but master volume of Fantom has to be up

    • @samd79
      @samd79 3 роки тому

      Ok Thanks!!!

  • @JoseMoreno-px7tr
    @JoseMoreno-px7tr 3 роки тому +1

    is it the same process for the controller set up?

  • @yuliyanparpulev3589
    @yuliyanparpulev3589 2 роки тому

    Very useful thanks for the video. Can he ask you, is it possible for the Phantom to control the MPC and everything is synchronized when you change the tempo of the Phantom to change to the MPC as well?

  • @natanmandala
    @natanmandala Рік тому

    Hey Bolo, or anyone else that has these two pieces of gear, I'm having trouble figuring out how to put a synth from the Fantom 06 into the MPC One, and get that synth on the Midi channel 1? On the Fantom 06, the sound is on part 7 in the zone select, but I want it to be on midi 1, not midi 7 or part 7? How do I take the sound from midi 7 to midi 1 or part 1, in order to play it into the midi 1 on the MPC One? I hope this isn't confusing, but I can't figure it out? Is there any way to transfer the channel 7 to channel 1 on the Fantom 06?...SBN RESONATE

  • @jayjohnson9894
    @jayjohnson9894 Рік тому +1

    Bolo, when you're working on the mpc x, you always use stand alone mode and than you transport it over to your DAW
    Am I correct with my understanding

    • @BoloDaProducer
      @BoloDaProducer  Рік тому

      Most of the time

    • @jayjohnson9894
      @jayjohnson9894 Рік тому

      @@BoloDaProducer I Alesis DM-5, Roland JV 880,and Roland Juno 106 I like to use with the mpc x
      Is it best to use a mixer or can the X handle it
      My Phantom 06 is going to be my contoller
      Am building a rack with some analog equipment
      Sounds on the 880 is killer

  • @BTLOMS
    @BTLOMS 3 роки тому +1

    Great clarity.Appreciate

  • @Talentocubano
    @Talentocubano 3 роки тому

    Bolo I need you help, I am using the Fa-08 with the Zenbeats software conected to my Mac Pro 2013 with the Big Sur os, I can record the audio from the keyboard, I have try everything, can you help me. Using the usb connection.

  • @EricRabb
    @EricRabb 3 роки тому

    Can’t go wrong with all black!! All my lab is black, even my TLM.

  • @jamescox1750
    @jamescox1750 10 місяців тому

    Good stuff Bolo, thanks for sharing I have both pieces of this equipment. Now I can Manage my workflow. Let me know where I can find that stand you have for the MPC X, so I can purchase it. I also have that keyboard stand, things will fit right into place for me. Thanks again Bolo. You da man!

  • @keyzbaby78
    @keyzbaby78 3 роки тому

    Can this set up be done with the live

  • @braintraxmusic
    @braintraxmusic 2 роки тому

    What setting configurations are on/off on the Roland ? Mpc?

  • @pdiggz2003
    @pdiggz2003 2 роки тому

    Bolo where can I get that keyboard stand?

  • @DiabolicKal646
    @DiabolicKal646 4 роки тому +10

    We need “I REALLY DONT CARE” T Shirts lol

    • @rickymayfield4316
      @rickymayfield4316 Рік тому

      I need your assistance, please

    • @DiabolicKal646
      @DiabolicKal646 Рік тому

      @@rickymayfield4316 wtf you talking about

    • @rickymayfield4316
      @rickymayfield4316 Рік тому

      I'm trying to connect my mpc live and fa6 but having a slightly different issue

  • @map804
    @map804 2 роки тому

    So I have a Rowland Fantom-s I do not see it connecting to my mpc x when you go on the x into preferences sync/midi I NEED HELLLLLLLPPPP PLEASE

  • @N3na100
    @N3na100 3 роки тому +1

    Hi again,,,just a quick question please ,,,I am getting my FA06 anytime it's on its way ,,,so I am going to link this up with my mpcx as to your video,,,however I currently have my speakers going into the inputs 1 and 2 on the X ,,,,,so would that mean I could plug the FA06 jacks onto the main inputs on the mpcx,,,,would that do the job,,,sorry if this is a stupid question ,,,thanks ,,,,,,,,,,,or would I be best to use the set up you have in your video,,,move my leads about etc ,,,😄

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому

      Use the same set up that I have, it will make your life much easier

    • @N3na100
      @N3na100 3 роки тому

      Hi ,,,ok will do thanks 👍

  • @yoadrianjams
    @yoadrianjams 3 роки тому

    You got one to connect the FA to Logic? Need help

  • @pistolptnc214
    @pistolptnc214 3 роки тому

    Do you have a video for the mpc studio software

  • @thizz707gr
    @thizz707gr 3 роки тому +2

    I got a fantom g6. I can get everything to work but I can't get the sounds from the fantom to play onto the mpc. Can anyone give me some suggestions on making this work?

    • @jamesonvparker
      @jamesonvparker 3 роки тому

      Are you running your 1/4” cables out of your keyboard and into your MPC?

    • @thizz707gr
      @thizz707gr 3 роки тому +1

      @@jamesonvparker yes. I can get it to play audio from fantom to mpc or as a midi controller. However, I can't play audio and midi together using the fg sounds.

  • @99MUZIK
    @99MUZIK 4 роки тому +1

    Can the MPC save all the midi keyboard presets patches in a project folder and be able to load them in without turning on your keyboard synth?

    • @BoloDaProducer
      @BoloDaProducer  4 роки тому

      Yes, but you won’t be able to play any sounds because the patches are just midi information

  • @tattooedballoon3766
    @tattooedballoon3766 2 роки тому +2

    Thanks a million, I've used an FA08 for everything so far, and just bought an MPC one, this is a very helpful video thanks. One question please.. can I transfer my songs and sequences from the FA08 to the MPC One, in a similar way to this when they're connected??
    Thanks
    Simon
    Tattooed Balloon 🎈

  • @0072gldnfngr
    @0072gldnfngr Рік тому

    BOLOOOOO! Thank you brotha!

  • @rickvestuto
    @rickvestuto 3 роки тому

    Great video but I can get any sound
    I have watched this video many many time
    I think you are leaving out something out like what are your Input and output set to in the sequence section set to
    how about a one on one session please? do you take a credit card or Paypal?

  • @BEASTBEATS700
    @BEASTBEATS700 Рік тому

    Hey Bolo big dog man I just got the Fantom 06 can u drop the links to those 1/4 inch cables , and USB cable tht I’m go need to hook up to the MPC x and the Fantom bro ? I wanna make sure I order the right stuff u feel me

  • @THEREALTWISTEDINSANE
    @THEREALTWISTEDINSANE 3 місяці тому

    This used to be my favorite video on youtube , this no longer works , ever since I upgraded now when I select my fa 06 I GET NO SOUND when plugged directly into my mpc , if I plug my fa 06 into my mixer I get sound but into my mpc NO SOUND , my moniter is set to auto , my fa 06 is selected in my midi track ....no sound , rec arm on ......no sound , created an audio track , fa 06 plugged directly into the back , no sound. Take my cables out of my roland plug into my kronos , sound 🤬. Sometimes , new chords , distracting me from using my external gear

  • @jeffreymarchuck2864
    @jeffreymarchuck2864 4 роки тому

    Bolo can you please tell me how do I hook up my fa o6 to the mpc software off the computer

  • @CMedia87
    @CMedia87 4 роки тому +1

    I have a motif xf6 and I'm using midi everything seems fine but when I play certain keys on the motif the note is sustained why? I'm using the REN

  • @bigvince1luv
    @bigvince1luv Рік тому

    Is this possible for maschine +?

  • @hardr5166
    @hardr5166 3 роки тому

    This video is just what I needed thank you but my own problem I have the MPC 2000 XL still and I want to do the same thing but run the MPC through the Roland08 to record and keep all data can I do that?

  • @andrescen7577
    @andrescen7577 2 роки тому +1

    Is the Roland being recorded as midi tracks or audio tracks with this setup?

  • @babar141
    @babar141 4 роки тому +1

    Nice so do u record to audio tracks for the audio?

  • @garyusinger
    @garyusinger 3 роки тому

    I have a Roland FA06 and a MPC Live. I also have a Fantom G. I was wondering if all of this will work with the G and the Live?

  • @DJWOLFLIVE
    @DJWOLFLIVE 4 роки тому +6

    I also have both the Fantom 6 and the X and this is just what I needed to do. Thanks for the advice.

    • @DoeCDoeTV
      @DoeCDoeTV 4 роки тому

      That’s crazy! Fantom 7 and the X over here! That was much needed info OMS 💯💪🏾

    • @robertc3172
      @robertc3172 3 роки тому

      Any issues using Roland Fantom 6 with MPCX

    • @TeleporterM11
      @TeleporterM11 3 роки тому

      How did you make the USB connections between the two. The Mp x and the Fantom 6. I have the two of them and I am trying to connect them up.

    • @streetiife9111
      @streetiife9111 2 роки тому

      @@TeleporterM11 hey I have both to did you figure it out just asking

    • @streetiife9111
      @streetiife9111 2 роки тому

      Did you ever get your fantom 7 working with the mpc x I got the fantom x6 and the mpc x but I’m getting no sounds out

  • @michaelk8642
    @michaelk8642 2 роки тому

    Nice video, Bolo. It answered my exact question without any bullshit. I would have said that you have a new subscriber, but I have already subscribed to your channel. Thanks a bunch!

  • @EricBishard
    @EricBishard 3 роки тому +2

    The reason the number is different, 0 on MPC and 1 on the keyboard, is because of... COMPUTER MEMORY! the MPC is using array indexing with zero as its base. As you said always one number below the program on the keyboard.
    I programming, we run up against this issue all the time. I also think it may be possible you find a keyboard that uses the same and they will match.

    • @michaelk8642
      @michaelk8642 2 роки тому

      The only programming I do (occasionally) is in Excel VBA and when dealing with arrays or indices, I have to remember that counting starts at 0 and not 1. Yes, there is a statement that I can use to make counting start at 1, but that's pretty much bad practice in general.
      Back on topic, I agree with your assumption that's the reason one number lower is chosen.

  • @cardbored_
    @cardbored_ 3 місяці тому

    Do you have to use the main / direct knob in order to hear the synth? When I mix in the direct sound it lowers the output of the internal mpc sounds (drums) etc anyone else experience this?

  • @jayjohnson9894
    @jayjohnson9894 Рік тому

    Does this same process work for the Fantom 06 and MPC X

    • @BoloDaProducer
      @BoloDaProducer  Рік тому

      Kinda… the Fantom uses scenes.. but it’s very easy to navigate

    • @jayjohnson9894
      @jayjohnson9894 Рік тому

      ​@@BoloDaProduceris there a different process to connecting the mpc x and fantom 06 (via audio) , if I have the mpc connected (via audio) to the model 12
      Mpc doesn't display the fantom 06 when I go into the settings of the mpc
      It displays the model 12
      Not sure what settings in mpc and fantom needs to be turned on or off
      Can you help

  • @MadskillsBeatz
    @MadskillsBeatz 3 роки тому

    What keyboard, mpc stand is that? I also have the Fa-06 and mpc x and have been looking everywhere for a stand like that.

  • @chaseisaac9563
    @chaseisaac9563 3 роки тому +1

    Thank you Bolo

  • @whitneynash5758
    @whitneynash5758 3 роки тому

    I have the Yamaha Mod x6 and mpc live trying to connect them together. Please help bro.

  • @BEASTBEATS700
    @BEASTBEATS700 Рік тому

    Hey bolo bro on my Fantom -06 is different from the FA 06 so my sync mode don’t have the option slave it says External,Internal, and Remote so which one would I go with bro

    • @BEASTBEATS700
      @BEASTBEATS700 Рік тому

      And another thing Bolo wht my Bank MSB and Bank LSB not lit up for me to tap on bro please help me out dog

  • @kevingthemusicmaker
    @kevingthemusicmaker 4 роки тому +2

    Yo Bolo! PLEASE tell me you know about the expansions for the FA..??? ALSO did you know you can load the Integra 7 expansions???!!! Man you GOTTA check it out!

  • @kingace1713
    @kingace1713 2 роки тому

    What’s the stand you got for keyboard and Mpc X together?

  • @N3na100
    @N3na100 3 роки тому +1

    Hi again ,,,I’ve managed to set my FA06 up with the X thanks to this video,,,respect thank you,,,,,,,,,,,,,,,,,so on track 1 I have X drums,,,,and on track 2 I have the FA06,,,midi 1,,,,great,,,,,,,but when I try and record on say track 3 using the Fa06,,,,,A,,,,it changes my track 2,,,,to the chosen new sound which I wanted to create on track 3 ,,,,,,,,,,,,,,,,,so how can I add another midi track using the FA06,,,,, onto the X ,,,please ,,,,,I hope this makes sense ,,,thanks again for your help 👍

    • @BoloDaProducer
      @BoloDaProducer  3 роки тому

      Might have to do a video chat to figure it out if you haven’t already👍🏾

    • @N3na100
      @N3na100 3 роки тому

      Hi ,,,sure that would be kool ,,,can you do it via zoom,,,,if so when would suit you ,,,thanks ,,,I am in the UK ,,,by the way 👍

    • @BoardFetish
      @BoardFetish 3 роки тому

      @@N3na100 HEY YO I HAVE THAT SAME ISSUE DID EVER GET BACK TO YOU??

  • @GCash76
    @GCash76 4 роки тому

    The question i wanna know is can you also control the vst plugins, i have a fantom g6, i can control the midi but when i switch to plugin mode on the mpc xi can't play the vst with the g6

  • @STMENTNETWORK
    @STMENTNETWORK Рік тому

    If I have the sounds from the fantom and a Mpk49 with a mpc x, what’s the best way to set up the mpc x to use mpk49 as if I had a real fantom?

  • @theshabbydabsrundown9810
    @theshabbydabsrundown9810 3 роки тому

    so sound is coming through the usb ? or the audio jacks?

    • @bryantwalley
      @bryantwalley 3 роки тому

      MIDI is two way on the USB. Audio is going out the 1/4" cables on both devices.