There was that grommet which I don’t show in the video for the bracket itself but then I had that larger grommet that didn’t specifically show it was for anything. Still don’t know where it’s suppose to go because it was bigger than the bracket grommet lol. Either way all the parts are in there that need to be
I’m torn between stretch kit or the intake and tune. Need to get some money together before I can do anything. Most likely gonna do stretch next since it’s cheaper
No I used the same items from the stock brackets. And for the rubber I drilled holes than put the bolts through the holes. You can see how I mocked it up at 5:00
@@kevinoliva1563 now that I re watch it I may have added some small washers. I do have washers of many sizes so I can’t tell you what I used but I may have
You can buy it on Amazon or possible a hardware store Limited-time deal: NABOWAN Solid Rubber Sheets,Strips,Rolls 1/4" (.250") Thick x 8" Wide x 8" Long (Pack of 2) Neoprene Rubber, Perfect for DIY Gasket Material, Sealing, Liner, Shield, Padding, Mat a.co/d/j0ByV8d
It’s weird that the hole is that big right? I just don’t see how the aftermarket version wouldn’t find a way to cover that. Seems wrong that it’s just so open
I just pulled with some needle nose pliers on the metal. If they didn’t already come loose easily by pulling the wire(which Is not recommended but can work)
Cool video! I got the same fender eliminator.
Clean install, looks great 🤙🏼
Thank you! 🎉
The rubber grommet goes on the tail tidy to prevent abrasion of the license plate light when passing thru .
There was that grommet which I don’t show in the video for the bracket itself but then I had that larger grommet that didn’t specifically show it was for anything. Still don’t know where it’s suppose to go because it was bigger than the bracket grommet lol. Either way all the parts are in there that need to be
Glad to see its not just my grom thats a pain to pull the seat off
Yea I had to clip it lol. It always takes me a while to get it to finally pop loose
Did you have to drill anything to make the holes bigger for the turn signals ?
No the bracket lines right up for all the stock lights and turn signals. The only “fabricating” I did was for the gasket
@@T3CHNOskillz thanks man. I appreciate it
I have a same 2023 red Grom and did that kemimoto fender delete, like it. Whats your next mods?
I’m torn between stretch kit or the intake and tune. Need to get some money together before I can do anything. Most likely gonna do stretch next since it’s cheaper
Looking forward to your next video
Did you have to get different washers to install the license plate light ? Also how did you add the rubber part to it ?
No I used the same items from the stock brackets. And for the rubber I drilled holes than put the bolts through the holes. You can see how I mocked it up at 5:00
@@T3CHNOskillz weird , I’m using the same 8M to tighten the light but they go through the hole
@@kevinoliva1563 now that I re watch it I may have added some small washers. I do have washers of many sizes so I can’t tell you what I used but I may have
I didn't have a problem with mine
Where did you get that rubber gasket material for water protection?
You can buy it on Amazon or possible a hardware store
Limited-time deal: NABOWAN Solid Rubber Sheets,Strips,Rolls 1/4" (.250") Thick x 8" Wide x 8" Long (Pack of 2) Neoprene Rubber, Perfect for DIY Gasket Material, Sealing, Liner, Shield, Padding, Mat a.co/d/j0ByV8d
Good work. Good solution for that massive gap. I've found one made by vagabond with a hole the right size for the cable. Bit more expensive though
It’s weird that the hole is that big right? I just don’t see how the aftermarket version wouldn’t find a way to cover that. Seems wrong that it’s just so open
I put PPF on both sides of the hole
Need to show you disconnecting the terminals I had a time
I just pulled with some needle nose pliers on the metal. If they didn’t already come loose easily by pulling the wire(which Is not recommended but can work)
@@T3CHNOskillz I had a blonde moment.. lmao
@@T3CHNOskillz thanks man