Fitting 35" Tires on a Jeep Wrangler

Поділитися
Вставка
  • Опубліковано 15 вер 2024

КОМЕНТАРІ • 62

  • @RubiconUnlimited
    @RubiconUnlimited  5 років тому +4

    Also worth mentioning - its recommended you trim your rock rails if you've got em. I took about and inch off the rear. Thanks for watching!

  • @AE-pj1gd
    @AE-pj1gd 5 років тому +3

    Very informative content, and great selection on all your accessories! I must admit, that I've almost mirrored your car with mine... I wish I had watched this video before I bought my 32" KO2's, otherwise I would've done the same as you. Keep the videos coming!! Greetings from Mexico.

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому +1

      Wow great to hear, really appreciate it! Thanks for watching 👋

  • @johnhudak3829
    @johnhudak3829 4 роки тому +2

    Great video, brother! You covered it all. Thanks for taking the time!

  • @MrFishstxx
    @MrFishstxx 5 років тому +1

    Excellent video, very informative!

  • @tanktheram
    @tanktheram 5 років тому +1

    Great videos! Keep it up man!

  • @ACDandMe
    @ACDandMe 4 роки тому +3

    How did you fit 315’s on the factory rims? Isn’t that 315’s requires minimum of 8” in width and factory rims is 7” - 7.5” at the most?

    • @toolmaker5150
      @toolmaker5150 4 роки тому +7

      ACD and Me stock wheels are 7.5” wide. That is out of spec according to most , if not all tire mfg’s. A lot of tire places will mount them , some won’t. I had 35x12.5x 17’s mounted on the stock Recon wheels, No problems. I think they look better with the slight sidewall bulge.

  • @JSyntax
    @JSyntax 5 років тому +2

    Excellent production quality. What gear are you using to film with?

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      For this video an old Nikon dslr. Just recently upgraded to a Sony mirrorless that I'll be using in the next video 👍 can't wait

  • @elmezcal4
    @elmezcal4 5 років тому +2

    Will it rub the front bumper if you install the side ends of the bumper? I want to run 35's, but I'll hate if i have take them off because of rubbing, thanks!

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      Good question, I haven't had the caps on to test but I don't see it being an issue

  • @jamiek21
    @jamiek21 3 роки тому +1

    Great video!...very informative...I have an 08 JKU rubicon and torn between the 285 and 315 ko2 tires..I also want to use factory rims...any issues with gearing etc?...thx again

  • @santiago71Q
    @santiago71Q 2 роки тому +1

    I have a 2018 JKUR Recon edition and i know i can put the 35" no problem but i want better shocks and springs. I want to beef it up and just want the basics for now, without going to far into it. What would you recommend?

    • @RubiconUnlimited
      @RubiconUnlimited  2 роки тому +1

      I just installed teraflex's st3 kit and love it! Did a video on it if you're interested. If you don't want to go that extreme, you can also get kits with just their falcon 2.1 shocks and springs.

  • @jaygoodman7037
    @jaygoodman7037 4 роки тому +1

    Do you find the get up slow with the 35s and your gearing. I’ve got a Rubicon with 4.10 gears. I want to step up to 35s just worried it’ll be sluggish. Thanks!

  • @SimritSingh101
    @SimritSingh101 5 років тому +1

    Great video. Just to be clear, set of 4 1.5” spacers correct?

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому +1

      Yeah! That's what I'm running here 👍 thanks for watching

  • @djspf222
    @djspf222 5 років тому

    What are the biggest tire I can fit on a wrangler with kit a lift

  • @mattmcwilliams7476
    @mattmcwilliams7476 4 роки тому +1

    Great video ... Love the KO2s on my other vehicles. Which load rating did you go with for the 315/70/17?

    • @RubiconUnlimited
      @RubiconUnlimited  4 роки тому +1

      Load range E over here!

    • @AZ-JKUR-HR
      @AZ-JKUR-HR 3 роки тому +2

      I am getting 315/70r17 bfg ko2 in c rating today!

    • @mattmcwilliams7476
      @mattmcwilliams7476 3 роки тому +1

      @@RubiconUnlimited we went with the C ... almost $70 cheaper. Now, just need to avoid those sharp, hard rocks!

    • @mattmcwilliams7476
      @mattmcwilliams7476 3 роки тому +1

      @@AZ-JKUR-HR Nice! You won't be disappointed!

    • @RubiconUnlimited
      @RubiconUnlimited  3 роки тому +1

      Enjoy em!

  • @slugzkea
    @slugzkea 5 років тому +1

    what's the L/100km with ther 35s?

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      I've been floating around 16.5 with a good mix of city and highway. Thanks for watching!

  • @dandempsey7195
    @dandempsey7195 4 роки тому +1

    Love he build. Does she clear at full flex?

    • @RubiconUnlimited
      @RubiconUnlimited  4 роки тому +1

      Very minor rubbing, will be sorted with bump stop extensions

    • @RubiconUnlimited
      @RubiconUnlimited  4 роки тому

      And thanks! 😁

    • @dandempsey7195
      @dandempsey7195 4 роки тому +1

      ​@@RubiconUnlimited Where does she rub? I am considering a Low center of gravity build myself, as break over angle doesn't really matter much to me

    • @RubiconUnlimited
      @RubiconUnlimited  4 роки тому

      Just in the rear, near the front of the inner fender. The bushwacker liner is wearing a bit

    • @dandempsey7195
      @dandempsey7195 4 роки тому +1

      ​@@RubiconUnlimited Gotcha! If you need a content idea, Im sure im not the only one who would like to see that rub, and how you mitigate that! Thanks for replying!

  • @Dangling_Carrot
    @Dangling_Carrot 5 років тому

    what size lift do you have and great video.

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      Just the teraflex 1.5" levelling kit. Thanks for watching

  • @JWard2
    @JWard2 4 роки тому

    What gearing? 3.21?

    • @KJsProjects
      @KJsProjects 4 роки тому +1

      Rubicons have either 3.73 or 4.10s.

  • @hedrichlaroco7814
    @hedrichlaroco7814 5 років тому +1

    What psi do you run with the 35s stock rim for daily driving

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      Great question. I find 30 psi has been a good balance for me. Lower and you get a bit of side wall roll, higher and the tread bulges a little with the narrow rim.

    • @hedrichlaroco7814
      @hedrichlaroco7814 5 років тому +1

      What about airing down with the narrow wheels?

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      No problems with this rim width, it's probably the max you could go. They don't call it the poor man's beadlock for nothing 😂

  • @woveetymailyke4101
    @woveetymailyke4101 3 роки тому

    وعلى شبابك وعلى أطفالك وعلى أمسالك

  • @woveetymailyke4101
    @woveetymailyke4101 3 роки тому

    وعلى أموالك وعلى شبابك وعلى أطفالك وعلى أمسالك

  • @woveetymailyke4101
    @woveetymailyke4101 3 роки тому

    على أطفالك وعلى أموالك وعلى شبابك

  • @woveetymailyke4101
    @woveetymailyke4101 3 роки тому

    على أطفالك

  • @BreweryRoad
    @BreweryRoad 5 років тому +1

    Your tires aren't 35's They measure less than 34 inches installed...

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому +1

      On paper 35. They measure 33 3/4. Thanks

    • @BreweryRoad
      @BreweryRoad 5 років тому +1

      @@RubiconUnlimited Looks good tho.. Good set up for the snow using the stock wheels.

    • @RubiconUnlimited
      @RubiconUnlimited  5 років тому

      Thank you sir! It's been great so far

  • @woveetymailyke4101
    @woveetymailyke4101 3 роки тому

    تعتدو حرمهم و مقادسهم و تحرقو بيوتهم