That trick is awesome for using TS paints on the inside. Always painted the trail trucks on the outside. I will try this on some of the faster cars I want to paint on the inside. TS definitely has more options. Thanks Chris!!!
You are a modern day piccaso Chris amazing paint sceme how simple you make it seem makes it easier for a newbie to graphic scemes like me execute the technique so now I'm going to use your lace technique on my Ryft kit whenever it arrives thank's for sharing 😉👍
9:12 "...super easy to paint..." - Everyone else, laughing at your mad skills. Chris, only you can paint eight square inches of lexan and make it look like art.
The very first time I painted a lexan body, I used a TS paint. The result, it started peeling almost immediately. It wasn't till much later that a friend told me the difference in the paints. I didn't feel very Hemistorm that day I can tell ya.
It's ok nowadays to ask questions, I do it all the time, I make hobbyshop workers & techs earn their money !! 😆 Input is ALWAYS GOOD, feedback or criticism. 😉 Ya learn way more !! - Some get annoyed, but they signed up to do their job ! 😜 👍
My buddy and I have been doing this for years ,but on the outside. Using PS1, 5, or 12 as a primer and putting the desired TS or even AS color over that. Way more scale than paining on the inside. Especially since scratches are real.
Wow clean and very nice. Because of your knowledge sharing I dared to do my first paint job. Not to fancy but you got to start somewhere. So mega thanks for showing me how, especially those little tricks like warming up your paint and how to layer your colors.
@@hemistormrc I can but only imagine the number of folks you have helped over the years with tutorials and explanations. - where as some won’t share - I am of the same belief - sharing is caring - when it comes to knowledge and assisting with experience it only comes back full circle in a beneficial way. 👍 and the ps55 and the ts result was dann close to the cage 👍
(FREE KNOWLEDGE)🌟 FOR THE REAR SHOCKS OF THE AXIAL RYFT, I USED 1/2" HEAT SHRINK TUBING, BY "NOBLE". FOUND AT ACE HARDWARE, AND IT PREVENTS THE CHAFING OF THE SPRINGS AGAINST THE SHOCKS !! 😉 👍🤘 COST IS ABOUT $6.00 FOR (4) TUBES 4" LONG. I USED APPROX. 37mm OF LENGTH, AND IT WORKS FREAKIN' PERFECT !!!! - LOOKS GOOD TOO !! - PROB SOLVED JIM BOB !! 😁
Im writing this before the video has started, On my MF-01X Rally Bug, I used PS-55 before using a TS paint (to make it stick) and then locking it in with another ps paint afterwards,
@@hemistormrc This is me and my dad MF-01X's, i.imgur.com/tl90oTe.jpeg Not the best pictures but we care more about driving than looks, My dad built a rally 2CV before Tamiya announced they were building one(with a MF-01X like mine but with a 2CV body from another kit) My bug uses Copper PS-14, Maroon TS-11 and a Tamiya PSXX 89911 Green Anodized Aluminium for hood and engine lid(This one was hard to get a hold of) With PS-55 on the outside of the 89911.
Such a great technique with the lacing! Thanks to your perfect demonstration, I might dare to try something similar on my Racing Fighter build. Thanks so much for sharing!
Another really quality video Chris. Used the PS-55 several times for all kinds of nice effects. It is great as a primer so you can use TS paint as you showed. Also great to use on the outside of lexan body if you go for a matt look. Or use it as a last coat on the outside of a lexan interior to take away the shiney look. Have not used lace before. But did use another material to get a carbon look. Top werk weer Chris. Kijk uit naar je volgende video!
Very interesting and helpful video...as you have shown in another video i always have way much better results even if it's cold outside... thanks for sharing this with us
Amazing Chris!! Once again . Great color for this thing. Enjoyed it once again .. Great tips on the TS paint use as well man. Thanks for sharing. Whish I new this when I started back in the day. lol
I accidently bought TS black years back to back a PS red. Used it in several bodies until it was empty before I realized it was TS not PS. Never had an issue with flaking or chipping.
@@hemistormrc love the channel by the way. I'm going to unleash my inner Hemistorm soon on a paint job. I'll tag you somehow. You can see what you inspired.
Awesome design on the panels! It’s always interesting to see what kind of idea you come up with. It’s nice to know you can use TS paint on a lexan body. 😁
Just got my ryft kit I'm finishing my kapra now about to paint it not really sure first one but I picked up the ps 5 black ps1 white and ps 23 gunmetal basically bc of you I feel like your the paint king your body are so cool. I picked up the mamba x esc and tekin roc 412 At 2300 kv and a few different pinion gears so I can slow my ryft down. I love what you did with yours I wanting going to do anything special but after seeing yours I have to do something. Thanks for the videos
Awesome video excellent job every time looks amazing I’ve used lace on real cars but still haven’t tried it on a rc. Definitely appreciate your videos I watched yours to help me get started on painting rc bodies
Love that Paint. Beautiful as usual !! Can you use that PS55 to knock the glare off the interior? I've been trying to find something to make it look used or dusty.
Couple days late on this one but great video as always. I've learned alot from your videos over the years for my paint jobs! Currently painting some panels for a Gatekeeper for girlfriend!!
Great tutorial Mr Storm I'm interested in using the same technique on the outside of lexan to get a Matt finish with layers of undercoat and steel showing through from underneath to give an aged trail worn look .Any tips?I'm thinking first coat of gunmetal in ps then plastic paint on top?
Leave it to Chris to use 6 colours to paint 3 tiny panels, with outstanding results! I've got to track down some of that lace, the drywall tape mesh is getting old! Excellent video!
Still learning paint, so why is it not okay to use TS? What is the difference in the TS paint vs the PS. Do you have a video explaining this or a video you recommend OR if neither could you make one? Thanks!
How does the TS paint hold up if primed with the PS clear? Similar durability as PS paints? I'm thinking of using TS-7 for a drift body and it'll have a decent amount of contact. Cheers, love the vids!
I know this is a little late but do you have a recommended number of coats for the PS 55? Getting ready to try it for the first time. Was thinking just two light coats to ensure full coverage. Thank you for all the great videos!
As always just phenomenal skills and so mesmerizing to watch! Also that tune for your intro, what is it? Sometimes I will just listen to the intro to give me a little positive lift to an otherwise bad day. Keep it up, Love it!
I love your painting videos Chris, and when I learn something new about any hobby I like it's specially awesome. I'm willing to sell some rigs to buy something new, I'll try something on some scrap lexan with Vallejo paints (Spanish) similar to your try here. Where can I send you some pics of it? ( I hope to sell my dust collectig Rc's soon! ) Stay safe, keep on, cheers from Spain
Great vid! Thanks for sharing. What would you do if you wanted to paint a lexan body a different colour but the body was no longer available? Would you use a paint remover or would you paint on the outside instead?
Dude. You have made painting very easy for me haha. Ok I dont get to crazy in design haha. But I try something new each time. Love that paint job. AWESOME stuff as always man. 👍👍😎⭐⭐⭐⭐⭐
Amazing job, Chris! Definitely using this technique on a quick and dirty Malibu drag body! Thanks for sharing. Now, to cut up my wife's underwear!
Apologize from me! 🤣
Every one of your paint schemes is an education. Your creativity is outstanding.
That trick is awesome for using TS paints on the inside. Always painted the trail trucks on the outside. I will try this on some of the faster cars I want to paint on the inside. TS definitely has more options. Thanks Chris!!!
You are most welcome, have fun!
You are a modern day piccaso Chris amazing paint sceme how simple you make it seem makes it easier for a newbie to graphic scemes like me execute the technique so now I'm going to use your lace technique on my Ryft kit whenever it arrives thank's for sharing 😉👍
That is extremely kind of you, Tim! I hope you will have a lot of fun with painting!
@@hemistormrc I am having fun 😉👍
9:12 "...super easy to paint..." - Everyone else, laughing at your mad skills. Chris, only you can paint eight square inches of lexan and make it look like art.
You are very kind, always happy to see you stop by! In honor of you, my next paint job will have your absolute favorite color on it. ;)
@@hemistormrc - I'm looking forward to it, sir.
That looks sharp.
Cheers Mike!
The very first time I painted a lexan body, I used a TS paint. The result, it started peeling almost immediately. It wasn't till much later that a friend told me the difference in the paints. I didn't feel very Hemistorm that day I can tell ya.
Ouch! I think a lot of people have been there at some stage. 😬
It's ok nowadays to ask questions, I do it all the time, I make hobbyshop workers & techs earn their money !!
😆 Input is ALWAYS GOOD, feedback or criticism. 😉 Ya learn way more !!
- Some get annoyed, but they signed up to do their job ! 😜 👍
You have one of the best music for your videos on UA-cam!! You make it look so freaking easy to paint, lol. Love the video.
Thanks so much 😊
Cool 😜. I grew up in the Lace paint era & almost forgot about that technique. I'll have to give it another shot.
Have fun with it!
You definitely can paint very well known for it I do enjoy some of your tricks you show I wish I had as much patience lol
Thank you, patience also takes practice. 😃👍🏼
I just finished painting a lexan body and used your taping techniques thanks so much for all you do sir
That is really awesome to hear, Chris! 😊👍🏼👍🏼
You do some really nice work keep it up
My buddy and I have been doing this for years ,but on the outside. Using PS1, 5, or 12 as a primer and putting the desired TS or even AS color over that. Way more scale than paining on the inside. Especially since scratches are real.
So many options with paint!
Damn! Now i want a Rift too.
It’s a really good looking platform! 😃👍🏼
Another creative way to use color from hemistorm
Thank you! Cheers!
Great video! Awesome techniques used to paint these body planes! Keep up the awesome work!
Will do, thank you for your support!
Wow clean and very nice. Because of your knowledge sharing I dared to do my first paint job. Not to fancy but you got to start somewhere. So mega thanks for showing me how, especially those little tricks like warming up your paint and how to layer your colors.
You are very welcome, thank you for watching!
actually, u r the reason for me to start painting on my own. ;) about 3 years ago :P
4 the algoooori...
I hope you’re having fun!
Love that lace trick! Great video Hemi!
Thank you kindly! 😃
Another cracking vid chap, 👍
Thank you kind sir!
@@hemistormrc I can but only imagine the number of folks you have helped over the years with tutorials and explanations. - where as some won’t share - I am of the same belief - sharing is caring - when it comes to knowledge and assisting with experience it only comes back full circle in a beneficial way. 👍 and the ps55 and the ts result was dann close to the cage 👍
I'm always amazed by your paint schemes! Top tip for me was the saucepan of warm water for the cans between coats. Cheers Chris🤟
(FREE KNOWLEDGE)🌟 FOR THE REAR SHOCKS OF THE AXIAL RYFT, I USED 1/2" HEAT SHRINK TUBING, BY "NOBLE". FOUND AT ACE HARDWARE, AND IT PREVENTS THE CHAFING OF THE SPRINGS AGAINST THE SHOCKS !! 😉 👍🤘
COST IS ABOUT $6.00 FOR (4) TUBES 4" LONG. I USED APPROX. 37mm OF LENGTH, AND IT WORKS FREAKIN' PERFECT !!!!
- LOOKS GOOD TOO !!
- PROB SOLVED JIM BOB !! 😁
Good tip!
Your color combinations are just eye popping. Looks great as always 👌👍
Thank you so much 😀
amazing job. Again a clear explanation of the process.
Happy to hear that, Scott!
Im writing this before the video has started,
On my MF-01X Rally Bug,
I used PS-55 before using a TS paint (to make it stick) and then locking it in with another ps paint afterwards,
Exactly!
@@hemistormrc This is me and my dad MF-01X's,
i.imgur.com/tl90oTe.jpeg
Not the best pictures but we care more about driving than looks,
My dad built a rally 2CV before Tamiya announced they were building one(with a MF-01X like mine but with a 2CV body from another kit)
My bug uses Copper PS-14, Maroon TS-11 and a Tamiya PSXX 89911 Green Anodized Aluminium for hood and engine lid(This one was hard to get a hold of)
With PS-55 on the outside of the 89911.
I been doing this on my military r/cs works great. I didn't spray the outside like the finish the way it was.
Heck yes! Paint is so much fun. 😃
Cool paint info and video
Thank you!
Amazing paint job as usual Chris! I love your videos where you teach painting techniques. I learned the ps55 trick from you years ago and use it alot
Very happy to hear that! 😊👍🏼👍🏼
Simple and awesome job!!! Love the lace pattern!!! Nice idea!!!
Thanks Clarence! I hope it will come in handy. 👍🏼😁
Such a great technique with the lacing! Thanks to your perfect demonstration, I might dare to try something similar on my Racing Fighter build. Thanks so much for sharing!
Looking forward to seeing what you do, Pim!
Another really quality video Chris. Used the PS-55 several times for all kinds of nice effects. It is great as a primer so you can use TS paint as you showed. Also great to use on the outside of lexan body if you go for a matt look. Or use it as a last coat on the outside of a lexan interior to take away the shiney look.
Have not used lace before. But did use another material to get a carbon look.
Top werk weer Chris. Kijk uit naar je volgende video!
Thanks so much, Frank!
Very interesting and helpful video...as you have shown in another video i always have way much better results even if it's cold outside... thanks for sharing this with us
Have fun painting!
Fantastisk! Flott resultat :)
Tusen takk! 😃👍🏼
Amazing Chris!! Once again . Great color for this thing. Enjoyed it once again .. Great tips on the TS paint use as well man. Thanks for sharing. Whish I new this when I started back in the day. lol
I hope you’re well, always nice to see you stop by!
Love your videos makes me want to start painting up some rigs tips and tricks are awesome and going to be very helpful
Have fun painting, Jerrold!
Nice work, the final result looks great.
Thanks Francois!
amazing paint job as always!
Thank you!
Mooi gedaan!
Dankjewel!
another epic paint scheme Chris! paint looks crazy good with the ts matching the cage too.
Turned out great man! Looks like something NASA might use on the moon. 👍🍻
Haha, I guess so! 😁
Always love paint videos and learn something every time🤙🏻 but I want to know more about the cutlery😉 collection in the corner now.
Noted! ;)
I accidently bought TS black years back to back a PS red. Used it in several bodies until it was empty before I realized it was TS not PS. Never had an issue with flaking or chipping.
Exactly! If you have a PS base coat, not an issue at all. Used as a stand alone color, it will flake off.
@@hemistormrc love the channel by the way. I'm going to unleash my inner Hemistorm soon on a paint job. I'll tag you somehow. You can see what you inspired.
Really great Chris. I'm very new to the world of RC and your tips have been a great help. Keep up the great work!
that flat clear is the best thing since sliced bread. I'll get some so I can paint my Capra tan and brown, two other colours not available in PS.
Your work is awsome I like how you did the trophy truck the minster energy one I'm painting my real truck like that
Awesome design on the panels! It’s always interesting to see what kind of idea you come up with. It’s nice to know you can use TS paint on a lexan body. 😁
Thanks Brad, I hope you’re well!
@@hemistormrc doing well! Hope you guys are too!
Cool thanks for sharing these tips, i will try the PS 55 flat so that i can use different TS colours
Just got my ryft kit I'm finishing my kapra now about to paint it not really sure first one but I picked up the ps 5 black ps1 white and ps 23 gunmetal basically bc of you I feel like your the paint king your body are so cool. I picked up the mamba x esc and tekin roc 412 At 2300 kv and a few different pinion gears so I can slow my ryft down. I love what you did with yours I wanting going to do anything special but after seeing yours I have to do something. Thanks for the videos
Awesome video excellent job every time looks amazing I’ve used lace on real cars but still haven’t tried it on a rc. Definitely appreciate your videos I watched yours to help me get started on painting rc bodies
I've never liked that these little cans are between $7 and $15 a can. Good advice on using the PS as a primer / etching coat for TS paints.
Love that Paint. Beautiful as usual !!
Can you use that PS55 to knock the glare off the interior? I've been trying to find something to make it look used or dusty.
You most definitely can! Works great for that.
Couple days late on this one but great video as always. I've learned alot from your videos over the years for my paint jobs! Currently painting some panels for a Gatekeeper for girlfriend!!
Outstanding work, congratulations
Learn something new each time I watch. LOVE the music also!
Thank you for watching, Steve!
Thanks for another great video. Any tips on cutting out circles and arch shapes?
Be relaxed and practice lots. 👌🏼👍🏼👍🏼
@@hemistormrc story of my life. 🤣
Another great paint scheme. Please may I ask how long you leave between painting and then removing your masking for the next colour?
Thanks Luke! Maybe ten minutes, tops? I put the body back on my lamp where it’s nice and warm, when it’s dry to the touch it’s basically good to go.
@@hemistormrc thank you very much. 🙂
So cool. Simple but bad ass paint job. Also what kind of tape do you use? I have 2 bodies I need to paint. Drag fox body and a 79 crew cab f250.
Hi Robert! I always use 3M tape, it never fails me. 👍🏼
awesome footage buddy
nice job my friend
U are one kickass painter, looks awesome !!!
Thank you so much, Benny!
Great tutorial Mr Storm I'm interested in using the same technique on the outside of lexan to get a Matt finish with layers of undercoat and steel showing through from underneath to give an aged trail worn look .Any tips?I'm thinking first coat of gunmetal in ps then plastic paint on top?
Yes, whatever comes to mind. I might do one like that soon. 😃
Leave it to Chris to use 6 colours to paint 3 tiny panels, with outstanding results! I've got to track down some of that lace, the drywall tape mesh is getting old! Excellent video!
Cheers Michael, glad you like it!
Damn Chris amazing job as always, love that trick. I will try to paint winter camo style on my Cliffhanger, cross my fingers !!
Still learning paint, so why is it not okay to use TS? What is the difference in the TS paint vs the PS. Do you have a video explaining this or a video you recommend OR if neither could you make one? Thanks!
Hi! The TS doesn’t directly adhere to the lexan. Using a PS55 creates a base layer that causes it to bond properly. I hope that explains it! 👍🏼
I see people use Rust-Oleum paint. Could the flat clear help the Rust-Oleum paint stick?
How does the TS paint hold up if primed with the PS clear? Similar durability as PS paints? I'm thinking of using TS-7 for a drift body and it'll have a decent amount of contact. Cheers, love the vids!
Yes, just as durable, no worries. 😁👍🏼
Great video, your designs are awesome. Keep up the good work b
Thank you very much, Fred!
I know this is a little late but do you have a recommended number of coats for the PS 55? Getting ready to try it for the first time. Was thinking just two light coats to ensure full coverage. Thank you for all the great videos!
As always just phenomenal skills and so mesmerizing to watch! Also that tune for your intro, what is it? Sometimes I will just listen to the intro to give me a little positive lift to an otherwise bad day. Keep it up, Love it!
I think it’s literally called Hooray for everything, hahahahaha! Thank you kindly for all the encouragement!
I love your painting videos Chris, and when I learn something new about any hobby I like it's specially awesome. I'm willing to sell some rigs to buy something new, I'll try something on some scrap lexan with Vallejo paints (Spanish) similar to your try here. Where can I send you some pics of it? ( I hope to sell my dust collectig Rc's soon! )
Stay safe, keep on, cheers from Spain
Hello Antonio! Instagram is a great way to send me pics of your work. Looking forward to seeing it, stay safe and talk soon!
Did you use mastic on the interior , to get that detail ?
Hi Chris, I cut the clear overspray film to use that as masking. Very easy to do!
@@hemistormrc that's a awesome idea ! Thanx !
How long is “cure”?
Great vid! Thanks for sharing. What would you do if you wanted to paint a lexan body a different colour but the body was no longer available? Would you use a paint remover or would you paint on the outside instead?
Depending the body, I’d probably give the outside a try.
@@hemistormrc Thanks I think it’s probably the better option. 👍
That looks great bro
Great content like always Keep them coming, Btw Congrats on your birthday you old man ;-) hahaha Greetings from Belgium
Thanks! Will do! :)
I wish u could buy them light boxes, u would make a fortune.. I'm not handy enough to build a florescent light box..
Dude. You have made painting very easy for me haha. Ok I dont get to crazy in design haha. But I try something new each time.
Love that paint job.
AWESOME stuff as always man.
👍👍😎⭐⭐⭐⭐⭐
Happy to hear that, have fun! 😃
No paint video complete without slightly heavy breathing while peeling the overspray film👌🏼😅 cool paintjob Chris😃
My mask makes some interesting Darth Vader noises. 🤣
@@hemistormrc it is an up most necessary segment👌🏼😅
Jij blijft de beste 👍!
How can I contact you?
Wow nice.
Lll
Your the BOSS!
Dat is geweldig
Dankjewel! Ik hoop dat je er iets aan hebt.
Hey, wait, go back to the dancing chick 🤔😁😂
Just to be clear😂....Lexan is General Electric’s brand name for polycarbonate plastic, just like Band-Aids are a Brand of Adhesive bandage.
Lexan clear. 😉
Only way I could do that is if you were here watching over my shoulder lol
👍🏿👍🏿👍🏿
Hei
Hei på deg!