Sometimes I've gotten lucky and had the engineer leave the vestibule door open, but usually it's closed and most cars have a polarized film to prevent light from the passenger area from interfering with the engineer's view of the tracks. Some conductors don't open the cab car to passengers on off-peak trains either, which is odd because it sometimes means there's no open car with a bathroom.
I believe I was in this cab car going to Bay Head, I looked up front a bit and it was an interesting ride. Honestly at Night, its a struggle for the operators to operate because I was looking through the front of the cab car and on the trip back to Long Branch, two deer crossed the track and almost got hit, thankfully they got off the track in time.
@William W. Campbell-Shepherd IX no, just find the right timing. Take Carlsbad village for example, they go 90+ mph but dont do an fra horn sequence in 15 secs. They do it in like 5 to 10 and for the close quarter crossings. A lot of engineers just lay the horn down through the next crossing or quill the horn
How much does it cost to go from Bay Head to NYC Penn Station on the train? Can you pay cash? And how do you do so? Just hand the cash to the conductor guy walking around?
@@flattrain5834 What I'm talking about is the Passenger seating area, not the drivers cab where the engineer sits. The Engineer cab is always a restricted area, just like the drivers cab on the subway trains. I'm talking about when is the passenger seating area in the car containing the drivers can open for passenger seating? Also, when getting on and off NJT trains at all stations which doors do they open?
On this section the whole train was open. I’ve seen some trains have many cars blocked off during non peak hours. I don’t know much about NJT honestly, you should probably ask somebody who knows more for more accurate information.
Sometimes I've gotten lucky and had the engineer leave the vestibule door open, but usually it's closed and most cars have a polarized film to prevent light from the passenger area from interfering with the engineer's view of the tracks. Some conductors don't open the cab car to passengers on off-peak trains either, which is odd because it sometimes means there's no open car with a bathroom.
The engineer said it was hot and the cab AC wasn’t working
Nice train horn
I ❤ NJ Transit
I believe I was in this cab car going to Bay Head, I looked up front a bit and it was an interesting ride. Honestly at Night, its a struggle for the operators to operate because I was looking through the front of the cab car and on the trip back to Long Branch, two deer crossed the track and almost got hit, thankfully they got off the track in time.
Wow close calls. They honk louder at night, right?
@@flattrain5834 Yeah I believe so. It was like an 8:20 departure or so from Bay Head to Long Branch.
If it’s a diesel only train going to Hoboken the cab car leads but if it’s a electric locomotive it doesn’t matter which side goes in first
Love the fact it sounds like 8308.
0:00 Bay Head
1:02 Point Pleasant Beach
5:30 Manasquan
8:42 Spring Lake
12:26 Belmar
15:28 Bradley Beach
17:18 Asbury Park
20:27 Allenhurst
24:10 Elberon
28:35 Long Branch
Beautiful Horn!
Indeed
Was he honking the horn so much for you??
Diane DeStefano no they have to at crossings
FRA Requires 4 honks for each crossing.
@William W. Campbell-Shepherd IX no, just find the right timing. Take Carlsbad village for example, they go 90+ mph but dont do an fra horn sequence in 15 secs. They do it in like 5 to 10 and for the close quarter crossings. A lot of engineers just lay the horn down through the next crossing or quill the horn
@William W. Campbell-Shepherd IX yeah. Np
Cool👍👍
MJ Skal_85 thank you
Nice
RX MattCARail thanks!
what rolling stock was used?
Comet V
How much does it cost to go from Bay Head to NYC Penn Station on the train? Can you pay cash? And how do you do so? Just hand the cash to the conductor guy walking around?
Lol no you have to either have a ticket on your phone or use a ticket machine and get one. I think my ticket was under $10
did you just ask the engineer if you can film?
Yes
Very good.
I can work on this Railway?
We are still hiring. I’m in training at the moment. Now is the time to apply.
Did you go for it? NJTransit has a variety of trains and loads of lines to work on. Good Benefits as well.
Hey, can I repost this to my channel with credit to you in the description?
No thank you, only if the whole video there is a watermark that says flat train in the corner
What is the Cab Car #? if you recall.
I think 6037
Cut the bits where he blows the stops yes
I never rode NJT. But at what times are the cab cars open to passengers?
I just got lucky because it was a hot day and the cab doesn’t have AC. It’s most likely closed though.
@@flattrain5834 What I'm talking about is the Passenger seating area, not the drivers cab where the engineer sits. The Engineer cab is always a restricted area, just like the drivers cab on the subway trains. I'm talking about when is the passenger seating area in the car containing the drivers can open for passenger seating? Also, when getting on and off NJT trains at all stations which doors do they open?
On this section the whole train was open. I’ve seen some trains have many cars blocked off during non peak hours. I don’t know much about NJT honestly, you should probably ask somebody who knows more for more accurate information.
@@flattrain5834 Are you saying on some trains when ridership is very low, they only open 1 car 1, door?
No I’m saying if there is low ridership they will close off a few cars. Say the train has 7 cars, they might close off 2 or 3 at the cabcar end
Did the engineer allow you to film this?
Los Angeles Rail Productions yeah he did.
Hope they extend electrification all the way to bay head eventually
What was the Cab Car # and Engine?
MonsterJam 626 cab car was 6037 but I’ll check the loco
Ok thanks
Flat Train this set mighta had 4015 but can’t be sure
It was a gp40