MAX See Through? Lian Li O11 Vision PC Build [RTX 4080 | Ryzen 7 7800X3D]
Вставка
- Опубліковано 15 чер 2024
- Experience the future of PC aesthetics with the Lian Li O11 Vision, featuring three stunning panoramic glass panels that eliminate obstructions and allow your hardware to shine as a visual masterpiece. 🚀✨
PC Inquiry🔨: archetypeorigins.com/inquiries
Links⚫⚪: linktr.ee/archetype_origins
Buy us a Coffee! ☕ www.buymeacoffee.com/Archetyp...
Specification:
-----------------------------------------------------------------------
MSI RTX 4080 Slim White: amzn.to/41MAC5u
Ryzen 7 7800X3D: amzn.to/3P3236c
Lian Li O11 VIsion: amzn.to/4aGwzeQ
Lian Li Galahad II LCD 360 AIO: amzn.to/3trcysd
ASUS ROG Strix X670-E Gaming WiFi: amzn.to/48fjfg0
32GB Corsair Titanium 6200MHz AMD EXPO: amzn.to/48v2Fs6
Samsung 980 PRO 2TB: amzn.to/47gHtFl
Lian Li SL-Infinity 120mm fan: amzn.to/3trpsq5
Lian Li Strimer 24 pin V2: amzn.to/3ZmjAs8
Lian Li Strimer 12VHPWR V2: amzn.to/3YDe0Tn
DeepCool PX1000G 80+ Gold: amzn.to/3TKdMJA
Metallic Sleeved CPU Extension Cable: amzn.to/4aBVwbq
NZXT Internal USB 2.0 Hub: amzn.to/3F5XYID
AM5 Anti-Bending Fixing Frame: amzn.to/3LQTHNb
WOWNOVA 5" LCD Screen: amzn.to/47xfeCB
-----------------------------------------------------------------------
Tools:
-----------------------------------------------------------------------
HOTO Cordless Drill: amzn.to/3UdnPaf
HOTO Electric Vacuum Cleaner and Air Duster: amzn.to/47wk7No
HOTO Electric Screwdriver: hototools.com/discount/ATO
Arctic MX-6 Thermal Paste: amzn.to/46DnMYp
iFixit Pro Tech Toolkit: amzn.to/425pTlR
Portable Monitor: amzn.to/3si0XKU
-----------------------------------------------------------------------
Equipment:
-----------------------------------------------------------------------
MAONO PD400X: amzn.to/46wl9Hh
MAONO Caster AMC2 NEO: amzn.to/3usX2vL
Neewer 2 Packs 660 LED Video Light: amzn.to/416jdT3
Neewer Motorized Camera Slider: amzn.to/3niUFc1
Neewer Collapsible Softbox Diffuser: amzn.to/40ZlGyD
Neewer 2 Pack Wireless Lavalier Microphone: amzn.to/3pAog1p
Epidemic Sound: share.epidemicsound.com/w8jqpw
-----------------------------------------------------------------------
0:00 Cinematic Intro
0:16 Specs
0:36 Assembly
2:18 Lian Li O11 Vision
4:33 GPU Installation
5:52 More Cables and Cable Management
9:10 Cable Management
7:17 Airflow Visualization
7:40 Showcase
Amazon Affiliate Disclaimer:
As an Amazon Associate, we earn from qualifying purchases, this means we may earn a small commission for our endorsement, recommendation, testimonial, and/or link to any products or services from this UA-cam channel and its videos!
#Lianli #o11vision #rtx4080 #ryzen77800x3d - Наука та технологія
![A PC with ONLY the TL LCD fans ft. Lian Li [RTX 4080 | 7800X3D]](http://i.ytimg.com/vi/G_nmCre-nfk/mqdefault.jpg)
![A PC with ONLY the TL LCD fans ft. Lian Li [RTX 4080 | 7800X3D]](/img/tr.png)
What’s the best case Lian Li has ever made? 🤔
this one easily
This and the O11-D Evo RGB
011D evo RGB
O11 vision, which you used, 'course
Yes the Vision is the best
Really a underrated Chanel awesome white build keep it up💪🏻💪🏻
🫶🏻
I love this case but it makes it hard for me to decide whether I like this case more or the EVO RGB more. They are both absolutely stunning versions of the O11 series of cases that never gets old for me, I still love it as much now as when it first came out. Lovely build, and I don't normally like air cooled GPUs and AOIs but you've done this really nicely.
It’s a tough choice!
Hello, happy new year, it's good that you put not only the parts of the PC, but also the tools that you use in assembly, I would be interested in tools like the screwdriver and things like that
We are obsessed with our tools!🧰
beautiful as always!
Thank you! Cheers!
What a clean ass build, love it!
Sick build!
💊
😱👍🏼❤️ Awesome Job!
In an announcer's voice: "Coming soon to a porch step, near you!"
Bravissimo. Complimenti per l'assemblaggio e per come hai realizzato il video.
Thank you my friend! 🇮🇹
Damn I just bought the vision and 8 sl inf fans in white. I also had a mini monitor I was planning to put but in a different spot of the case. Haven’t built it yet bc of the holidays but this is pretty much what my build will look like
Great minds think alike! Subbed.
Great minds indeed think a like! Happy Holidays and cheers to your new build !
that's a nice fishtank
Please tell me, how did you install the small control display. Via HDMI or Display Port and therefore as your own monitor or how is it connected? I would like to use that too, but I don't want it to be recognized as a separate monitor on the GPU
This case makes the most aesthetic of builds and definitely the best case lian li has to offer.
cant stop staring 👁️🫦👁️
@@archetype_origins definitely
Working on very similar build, and was kind of looking for thermals because I'm a gamer and I'm trying to decide between this or the 011 RGB. Still, nice to see just so I can avoid any problems that might arise.
tough choice. Jenny votes RGB and Ben votes Vision
Glad to see you got rid of the annoying flicker neon light😢
We try to listen to our audience and fix our issues, the light is still there, we only use it to take photos now! 😂
Nice!!
Is the am5 contact frame compatible with lian li galahad aio 360 sl uni fan?
Liam li galahad link keeps going to a black one its not the same one i dont think can some confirm?
Someone's going to be a happy customer 👍
We definitely hope so!
Looking to build something like this. New to this 😂 what are those small boxes in the back at the end of video ? Thanks !
Small boxes?
It's a beautiful case no doubt about it. Looks better than my 011 Dynamic XL De Bauer even. I just can't get onboard with my AIO not going up top.
I fit my AIO on the top with my OC11 Dynamic XL ROG - Unless you're using 400mm fans?
@@Grimm_Entertainment Yeah so do I but you can't do that with the Vision.
👍🏻 agree. This case is aesthetic over function
😭😭😭
Another recommended air flow pattern is indicated on the manufacturer's website. The side fans are located on the cold air injection and only the two rear fans work on the return of hot air. Can you explain why you did it differently?
We did a review on the O11 Vision Case, check it out:
ua-cam.com/video/kZNXD28fTW4/v-deo.html
@@archetype_origins thx a lot
IMO I would have liked the gpu to be vertically mounted Becos it’s such a good looking card, I feel it’s being hidden away a bit. Either way amazing build man!!
vertically mounted 🤩🤩🤩
Is the aio comes with reverse blade? I’m switching over to all Lian li myself and was curious about that
Yes they do! They were out of stock when we were tying to get 3 reverse blade for the bottom 🥲
Really hope 2024 is the year I get the my PC.
This year is your year! We can feel it in our bones 🥳
Hello!
Really nice build. I decided to implement something similar)
However, I'm facing some supply issues with the internal USB hub. Is it really necessary with this motherboard, or should I consider another motherboard? (I have the option of the MSI MAG X670E Tomahawk WiFi.)
Get the NZXT internal hub, links in description!
SICK!
🙌🏻🙌🏻🙌🏻
What is the total cost of the build right now?
excellent video
Glad you liked it!
Excelente build, yo hubiera preferido usar 6 ventiladores con hojas inversas como intake y 1 ventilador como exhaust.
Then you wouldn’t have anywhere for the heat to go , you need more exhaust than intake.
@@brockpace8996 Habrás escuchado alguna vez de la presión positiva?
Totally understand that you’ll want to do more intake than exhaust. We just feel like this way has too much intake and that one fan outtake is going to have a really hard time dissipating heat by itself
Beautiful build with this amazing new Chassis!!! For the AIDA64 display... can you post please a link to that AIDA template??
That is a plug and play display, we're not using AIDA 64.
We have done a review on this mini LCD screen before, you can check it out here: ua-cam.com/video/jIz-nnLEcVo/v-deo.html
Whats the model number for the fans you used and how many fans did you add ? I am building almost identical setup but with nova asrock mobo and i9 14900k
all the components are link in the video description
Hello, found your channel today and i'm lovin your videos , i'm from brazil, sorry for my english bro, but i have a doubt, i wanna my pc to look like this buid, but in black and with two differences. I'm wondering, is it possible to have the two rear fans, a vertical gpu and the LCD screen? I'll go for 3x 140mm fans at the bottom (intake) and the other 5 fans for exhaust.
Hi fren 🇧🇷Your English is good! Your configuration seems fine to me
You now have 3 fans on the bottom blowing in and 4 fans blowing out (3 on the radiator + one at the back). With this case you want 6 fans that blow in because the entire back is perforated and allows air to pass through. It is then not even necessary to install an outtake fan.
We do agree that most of the time intake should be more than exhaust fans. However, it is 100% necessary to also install exhaust. Airflow is what matter the most in building a PC not just intake or exhaust
I own this case with 6 Noctua fans on a fan controller. Three on the radiator that blow in and three on the bottom that blow in. The advantage of the closed glass panels is that the air does not escape and works itself out through the back. This way you create a gigantic airflow.
А если купить реверсивные вентиляторы от лиан ли на вдув? Эстетики больше будет, снизу тоже будет виден эффект бесконечности?
Yes!
Really wish I saw this before bought all my stuff 2 days ago!!!!!!!!!!!!!!!!!!!!!!!!!!!
Retuuuuurn! 😂🤣 just kidding, but tell us what you purchased! We want to know!
Can 360 handle 7800x3d? Is it better to take Arctic 360 or 420 for such a processor? what difference will it make? I can’t decide on the body, I really like this one, and aquariums are in fashion now, but I’m afraid the stone is too hot and it would be better to take Lian Lee Lancool III and 420 dropsy
360mm can absolutely handle a 7800x3d
Isn't it better to put the side fans on intake?
Debatable, we’re only doing one more exhaust than intake. The, slight negative airflow is not gonna affect performance much, and it’s better to have exhaust the radiator heat out of the chassis rather than pulling them in and have the one single exhaust fan blowing out all the heat coming from cpu and gpu
boss man if i have an i9 14900k with the same mother board would it be overkill if i use a rog strix white 4090 ?
Nope you’re good! 👍🏻
if we lower the graphics card to put a second fan towards the outside. Will the incoming air be blocked by the graphics card?
Do you mean lowering the motherboard tray and adding a second fan on top? If so, then no it wouldn’t get blocked
@@archetype_originsthanks
i don't like negative pressure. that aio fans should be intakes fans, especialy on that case that laks a litle bit of airflow
this
Apprecaite the feedback, this one is tough because we have to choose to do either lower the motherboard tray (less aesthetically pleasing look) or slight negative pressure airflow
@@archetype_origins you can du that 3 fans on the aio in intakes modes. less esthetic but better airflow
Simple white build.
An Exquisite White build😊
A spectacular white build 🤪
how’s the negative pressure for airflow?
This one is tough because we have to choose to do either lower the motherboard tray (less aesthetically pleasing look) or slight negative pressure airflow
On 7:10, I don’t see those 2 small boxes on the specifications.. would I need them? If so, can I have the link please
?
Those are the Lian Li hubs . They come with the Strimer cables and the AIO. If you get the fans in a multipack it will also have one
can we put 3 140mm fans at the bottom with the config in the low position
Absolutely, we would defintely recommend doing that if you want to do this fan configuration
Okay nice thanks you
Is there a vertical mount included when purchasing the case?
No unfortunately
Hola, te sigo desde españa.
Los enlaces de Amazon no me dirigen al producto descrito ¿como puedo solucionarlo?
Gracias, buen vídeo, como todos.
Hello, friend from Spain! If the links don't work, you will just have to search each item by name 😭.
@@archetype_origins ok
Hope that helps!@@jorgej9727
Can u build, Same design but all black ?
Of course we can! 😎⚫️
The fact you cannot put a 360 AIO on top is a step down from the Dynamic Evo IMO. I really like my NZXT H6 Flow, this case would not work for me and my H6 flow already has the panoramic glass on the front like the 011 Vision. I like my Evo case a great deal, the issue is EVERYONE builds in one and it is a heavy case.
AIO not being able to be top mounted is unfortunate, indeed
Is it ok to have 6 intake fans for only 1 exhaust?
Yes
Он что охлаждение без термопасты поставил?
Reapplied thermal paste
in the Short. it is a 4070 TI Super, and now 4080 Slim??
Different but similar build
2:54 where are those white cables from?
The case
Brother. did you use a splitter for the fans into the mobo?
No I didn’t
@@archetype_origins as I have the same setup of fans and aio and board. I don’t need any extra splitter right?
Nope!
@@archetype_origins thanks so much! So good build!!
@@archetype_origins last question brother. On your video. The one’s sitting on top of your psu, is that included with the aio or the three pack fans?
I almost got mad at you for not using led power cables then I was like oh good there they are.
You know we wouldn't do you guys like this 😉
пушка-бомба👌✌
👌🏻 ✌🏻
its best configuration fan for airflow?
lian li recommendations: bottom intake, side aio push pull intake, rear exhaust.
Yes! but you do have to lower your motherboard tray which makes it a little weird 🥲🥲@@EnriqueMartinez28
Wouldnt rear intake be better than rear exhaust?
Nah heat rises, get it out, lowers the temp inside overall.
@@Paul_in_FL but I feel like pushing the air coining from the bottom intake towards the side exhaust
@FantasticHD7 u need that full intake and exhaust because you need the coolest air possible because you sening most that air through your radiator. If that is your only exhaust, it will be warmer and not cool as well. You are trying to lower ambient temps since you are missing the top 3 fans in this version. Also, the radiator exhaust is technically still in the case, not a direct exhaust like the back.
If you do this with a custom loop water-cooling system with a radiator exhaust on the side, then yea. Otherwise, rear exhaust is almost always better because it helps with exhausting the heat out coming from the GPU right underneath it
PC should have more intake than exhaust fans.
Agreed 👍🏻
Бро это невероятно
Thanks 😊
Broo, you forgot to apply thermal paste and remove of sticker on cpu cooler, anyways sick build ❤
Thanks! thermal paste was pre-applied
@@archetype_origins ooh then fine it's a very good build
how much did it cost in total?
archetypeorigins.com/archetypestore/p/j1w6xume6s4tfii4gr6vjn8i8j641s
Evo XL Nr.1😊
What about Lian Li No.1?
there comes a time when standards change and components become more and more complex. not only lian li . break through innovations, but they still show the best price-quality ratio 👍🙂
100% agree! One of the best innovators
Does this case fit a 4090 graphic card?
yes!
you could go with some white ram sticks instead
I could, but they don’t make one with AMD expo
Silver AMD expo G.Skill is the closest and best bet atm.
how much does it cost in total?
if you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you!
archetypeorigins.com/inquiries
how much did this build cost?
if you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you!
archetypeorigins.com/inquiries
3 intake and 4 exhaust is a very bad decision. There will be a negative pressure inside the case, it will be sucking dust like crazy + not great colling. You should make positive pressure, more intake than exhaust. With that case you can mount your motherboard lower and place 2 exhaust and 6 intake or 5 intake and 3 exhaust
depends on how fast the fans are spinning as well
@@McDudes all fans have the same speed, so speed doesn't mean anything if we are talking about positive/negative pressure
it does not work like that
pretty sure you can set fan speed in some software@@yurii851
Since we only have one more exhaust compared to intake. The slight negative airflow is not going to affect too much and the rear ventilation of the chassis should help with that too
No thermal paste anymore??
Pre applied
why fan cables are black？ XD
They came in black 🥹
How much does this cost?
if you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you!
archetypeorigins.com/inquiries
you know what sucks ? when Lian Li is stupid enough to sell a case that doesnt have clearance to its own 12 VHPWR strimer. yet. a phantek case like the NV7 does and very comfortably placed. Sold my dynamic Evo for the NV7. what an amazing case. even the Power cables for the board can be hidden.
fits with my 4090
NV7 is a nice case 😎
“Exhaust”
Exhuasssst 😂🤣
not max see thru...that little triangle corner is blocking alot of stuff
Sorry! What did you say? We cannot see your comment! It’s blocked by that little triangle corner 🔍
2.9 million subscribers channel selling
No thanks
That card is not slim 💀😭 still nice build! I’m trying to replicate such a build but instead with a 4070 ti
That’s exactly what we said when we opened the box. Should be called MSI RTX 4080 “not so beefy”
전동 드라이버써서 기판 휘어지는거 봐라..
🌊
RIP NXZT?
I think Lian Li wins in almost every aspect
i whant it
get it!
Hi there my dad loves you content… can you please build him a PC
if you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you!
archetypeorigins.com/inquiries
7឵
8
Beauty but really bad Airflow in this Case
Sometimes, sacrificing a little bit of airflow for the look is not always bad
your AIO orientation is the reason this build got a dislike. do better.
Awww 😪 tell us more…
its definitley a case i guess, its quite ugly, theres only so much glass that should be on a case, maximum of 2 glass panels, i dont need a birds eye view of my computer
What’s your favorite case? We are curious 👀
@@archetype_origins I've got quite a few, I've really liked NZXT's h510 elite + H5 Elite for a long time, but also the 011 Dynamic and Fractal Design Define series. The main reason i don't like the 011 vision is because the top panel makes the case look very thin and cheap
NO !!!!!!!!!!!!!
Whyyyyyyy?