Sharpening Hedge Trimmer Blades Like a Pro

Поділитися
Вставка
  • Опубліковано 13 жов 2024
  • step by step on how to Sharpening Hedge Trimmer Blades Like a Pro

КОМЕНТАРІ • 17

  • @brobrickcreations
    @brobrickcreations 2 роки тому +7

    I want to thank you for giving me so much info on your vids and shorts. I'm only 15 working at a lawn care company, and I've learned so much from you and my job.

  • @jameshendrick8499
    @jameshendrick8499 2 роки тому +1

    Outstanding performance. God bless you

  • @edwardkane3237
    @edwardkane3237 2 роки тому +2

    Harbor Freight mini belt sander is my choice. It makes quick work of hedge trimmer sharpening.

  • @dorrishetherington4915
    @dorrishetherington4915 2 роки тому +2

    Thank you

  • @MrChasestroud
    @MrChasestroud 2 роки тому +1

    Jonny do you have issues with your hedge trimmer where under full throttle the trimmer cuts in and out almost like the throttle is bogging down. I have a Stihl HS 45 and just purchased the tool you used to sharpen your blades with. I bought a can of blade cleaner that Stihl makes when i bought my Hedge Trimmer I've put a new spark plug in it and mixed new 2 cycle gas together. I also cleaned the air filter out with some warm soapy water. I only use non ethonal gas. The fuel filter seems to be clean I have not had to replace it yet since I only bought the hedge trimmer a few months ago.

    • @Lawncareguy2018
      @Lawncareguy2018 2 роки тому +3

      Check your muffle and remove that little extra piece of fab I had same problem

    • @shanew7361
      @shanew7361 2 роки тому +4

      Stihl are known for carburetor issues. I had this same trimmer and after being in the shop 5 times I threw it in the trash and went electric and haven't looked back. I will never own a stihl anything again. Zero issues with my Echo equipment.

    • @tomg1066
      @tomg1066 2 роки тому +2

      ​@@shanew7361 That's funny when Stihl is the leader...
      When the sit; any carb will mud up if stored wrong!

    • @E4create
      @E4create Рік тому +1

      ​@@shanew7361literally have never had to stop a job due to equipment failure and have had it serviced a few times in like 6 years

    • @vectorspeedandconditioning97
      @vectorspeedandconditioning97 10 місяців тому

      Carburetor Adjustment?

  • @AntLive29
    @AntLive29 2 роки тому +1

    Thanks!

  • @lynettetucker544
    @lynettetucker544 2 роки тому +1

    Good idea 👍🏾

  • @rycn7355
    @rycn7355 2 роки тому +1

    Run what ya brung.

  • @jerryrfields
    @jerryrfields 2 роки тому +2

    Slow down. What is the hurry. I need more explanation.