Basics: Wiring a Socket Circuit

Поділитися
Вставка
  • Опубліковано 9 січ 2025

КОМЕНТАРІ • 37

  • @VanClaaude
    @VanClaaude 3 роки тому +8

    Dude, I can't stop watching your videos. I wish all that you show on them applied to WA. We have freakin' brick houses, hard to manipulate, harder to chase/trench walls to place a cable and what is even more frustrating everything is screwd up to start with. I highly appreciate you sharing your experiences. Cheers mate!

  • @christianjamesheath
    @christianjamesheath 3 роки тому +7

    You're just a bloody legend mate, got so much done on my place thanks to your videos.

  • @pkak1
    @pkak1 2 роки тому +3

    Great content. I found no sparky in Aus that is so valuable on UA-cam. Thanks mate.

  • @dodgygoose3054
    @dodgygoose3054 2 роки тому +2

    Dave your a legend, your vids should be apart of Tafe just so easy to follow, thanks heaps.

  • @johnpaa9032
    @johnpaa9032 3 роки тому +2

    Sparky Dave is back it’s been a while lovely demonstration and well explained keep the videos coming.

  • @stephenhalliday5480
    @stephenhalliday5480 3 роки тому +3

    Thanks Dave. Your videos are straight to the point and much appreciated

  • @joshuapluckrose9678
    @joshuapluckrose9678 3 роки тому +2

    Thank you so much Dave, I'm glad you back

  • @TonyFarrell2005
    @TonyFarrell2005 2 роки тому +1

    Excellent video. Direct with no wasted time. Many thanks.

  • @Niberspace
    @Niberspace Рік тому

    I'm so grateful we have thsi amazing tutorial AND that it's specifically for NZ

  • @elijahcateris6300
    @elijahcateris6300 3 роки тому +4

    Mate this is excellent work I love your videos keep it up 👍

  • @jayp1508
    @jayp1508 2 роки тому

    Appreciate these bro, first year apprentice and your videos are very helpful 💯

  • @xxpynkxx8694
    @xxpynkxx8694 2 роки тому

    Love all your videos! I am doing a Cert II right now, and made the mistake of having one of the screws contacting the insulation in a wiring prac. Haha, was disappointing when I didn't get a reading on the meter/the light wouldn't turn on hahaha.

  • @michaelg2465
    @michaelg2465 20 днів тому

    Thanks for your videos much appreciated 👍🏼

  • @mancsmowhann3219
    @mancsmowhann3219 Рік тому

    Hi Dave. Thanks for info. I am fitting a new counter top above the front loader and dryer. I don't want to have a hole in it for the leads to go to the existing power-point. could I use a power-point with extra switches in the original to control the live to a new lower positioned power-point that I wont be able to get to when the units are in?. I will put in a recessed power-point below

  • @Jean-bj5md
    @Jean-bj5md 2 роки тому

    You're just a bloody legend mate

  • @offgridaussies
    @offgridaussies 2 роки тому

    G'day Dave,
    Mate, could you chuck a how to up on wiring a remote operated ceiling fan into an existing lighting circuit.
    I've been wiring a shed using your light switch how to, connecting the Neutrals and Earths away from the switch, and wiring the common and live only. I'm confused with how a fan would be wired into this circuit as far as Neutrals and Earths.
    I hope you can help us out!!

  • @a.kumar.5760
    @a.kumar.5760 3 роки тому

    I became a fan of your educational video..keep the good work up.

  • @Niberspace
    @Niberspace Рік тому

    what if I put many many many layers of gibboard on the studs, should the box still be attached to the stud (even though that means a great distance between the cover and the box) or should it protrude a bit from the stud?

  • @surumaantipas2376
    @surumaantipas2376 Рік тому

    Thanks mate. How many sockets should I have for a single breaker?

  • @DFATENOVA
    @DFATENOVA Місяць тому

    Is this for New Zealand homes ?

  • @NZ255
    @NZ255 3 роки тому

    How does the loop in the cooper interact with the screw? Does the screw end touch both sides of the loop? Should there be a gap in the loop?

    • @zoltrix7779
      @zoltrix7779 2 роки тому +1

      The screw takes up 80% of the circular tunnel of the connector, its impossible to miss if you have doubled of the conductors.

  • @jaymax9560
    @jaymax9560 3 роки тому

    Can we wire from 1 point to the other. I want a point next to the toilet for a bidet.

  • @Swenser
    @Swenser 2 роки тому

    I am not understanding why the metal c clips that are used are not earthed. If the live wire were to ever fall loose to hit that clip and someone grabs it they will get zapped, right? Not likely, but most accidents are not likely.

  • @kyba74
    @kyba74 3 роки тому

    Hi Dave, Any advice on replacing a socket circuit when there's 4 cables coming in and the 4 wires twisted together don't fit into the new socket terminals? Cheers

    • @offgridaussies
      @offgridaussies 2 роки тому

      @@penguin4597 than what would be the point in watching Dave's videos??

    • @offgridaussies
      @offgridaussies 2 роки тому

      @@penguin4597 yep. Righto! LOL

  • @djohn063
    @djohn063 3 роки тому

    Whats Next Dave ? Maybe set up Auto gates

  • @KingsCrossVIP
    @KingsCrossVIP 2 роки тому

    Great Videos thanks

  • @GibsonKunjap-z2p
    @GibsonKunjap-z2p Рік тому

    Thanks,,helps alot

  • @reignkhalila8776
    @reignkhalila8776 3 роки тому

    Inshalation😂 great video

  • @gadwalidost
    @gadwalidost 3 роки тому

    Hey mate
    How to become fully registered electrician

  • @d.vsinghbali7550
    @d.vsinghbali7550 2 роки тому

    Very helpful mate

  • @maurieknight5120
    @maurieknight5120 2 роки тому

    Where did you get the terms "dwang" and "jib". I am a retired trade teacher and I have never heard those two terms. In NSW, Vic and WA a noggin and cladding are the terms taught. Please don't confuse you followers, but otherwise very enlightening.

    • @eggmanbmangman
      @eggmanbmangman 2 роки тому +3

      This may be a surprise but there is more to the world than three states in Australia and there are lots of different terms for various things around the globe. Do you expect him to waste time researching and then saying all the different terms? He's pointing to the items in question so should be fairly obvious what he is referring to. Also as someone who has lived in NSW my whole life, the term used is gyprock or plasterboard. Cladding goes on the outside of the house

  • @shrutibagde573
    @shrutibagde573 2 роки тому

    Hey, this is Family Handyman just want to follow up we are still interested in your video. Please contact us back so we can discuss this. Thank you