Having the same problem, Uninstall your Control Editor Software and Reinstall the Control Editor Software from Native Instruments. This just fixed my issue.
You just saved my life had the same problem and tried to update software then traktor realized that my hardware needed new firmware. I have the S2 mk3. Hope it Can Help sm rose
@@1Artshitcan you please give me you snapchat or instagram? i have the same problem as the guy in this video but i have the same controller as you, i want to ask you some questions
Hey there,i have a s4 mk2 and when i connected it for playing the knobs at the Traktor software runs like crazy.After a calibration and restore default settings to default still the same problem.Do you have in mind what is the problem?
dude your usb pot is broken ... open it up and replace it ... I did it on my S4mk1 its easy ... you need a solder kit and you'll be good to go in seconds
Awesome. I'll have to check whether my unit is still available. It's been a year since I dropped it at the tech support center. Send me an email at info@karmymusic.com !
You're saying this as if it's piss easy to do. The dude has to literally disassemble the entire controller, desolder the old jack and resolder a new one.
@@nikkyG2002 Believe me, it has been locked in the closet for some time. Just opened it up last week and will either fix it myself or take it to an electrician for the soldering to be done with a new socket. I will definitely update you once done. Good luck with yours.
Hey Tanner, thanks a lot. I ended up replacing this with a new Traktor Kontrol S2 MK II. The one on the video had an issue with the mother board, apparently.
Mine does the same thing except it lights up
same have u found an answer yet?
Having the same problem, Uninstall your Control Editor Software and Reinstall the Control Editor Software from Native Instruments. This just fixed my issue.
Carlton Oates in my case that didn't work... apparently my unit was defective...
Juan, I am glad you founded the problem.....
Juan Antonio Karmy
, so what defect was ? its possible to fix it?
You just saved my life had the same problem and tried to update software then traktor realized that my hardware needed new firmware. I have the S2 mk3. Hope it Can Help sm rose
@@1Artshitcan you please give me you snapchat or instagram? i have the same problem as the guy in this video but i have the same controller as you, i want to ask you some questions
It comes also with a charging cord and you didn’t connect it
Hey there,i have a s4 mk2 and when i connected it for playing the knobs at the Traktor software runs like crazy.After a calibration and restore default settings to default still the same problem.Do you have in mind what is the problem?
This happened to mines as well to. Thanks for your video help.
How do you get the traktor s2 to connect to the software? Ive been struggling with it, and Im not sure how to fix it.
you get a paper from NI right ? you have your hardware in the same paper you have an adresse (www.) go there and you will find all steps
bro, they sent you an answer at least?
Aleh Andrade yes, they tried to help, but I ended up buying another Traktor. This one apparently was dead for good... mother board issue.
@@JuanAntonioKarmy I am having the same issue as this and when I plug in the PSU nothing comes on. How did you identify the mother board was dead?
dude your usb pot is broken ... open it up and replace it ... I did it on my S4mk1 its easy ... you need a solder kit and you'll be good to go in seconds
Why to blinking of triangle induction of tractor s2
overloading cpu
@@davidfillino4858 how do you fix this its driving me mental
Oh, Juan, and I'm serious about buying your older unit !
Awesome. I'll have to check whether my unit is still available. It's been a year since I dropped it at the tech support center. Send me an email at info@karmymusic.com !
Call Native instruments get it fixed or have them replace it 🤦🏻♂️
Hello . Thank you for ur useful video, i have connected every thing to computer, but still it dies not work, what should i do? Can u help me plz
There is one thing that needed to be done, change the connector socket and that is all. Which would cost not more than a couple of 10 bucks.
You're saying this as if it's piss easy to do. The dude has to literally disassemble the entire controller, desolder the old jack and resolder a new one.
I’m getting mine done 19 December, did you ever get yours working mate
@@nikkyG2002 Believe me, it has been locked in the closet for some time. Just opened it up last week and will either fix it myself or take it to an electrician for the soldering to be done with a new socket. I will definitely update you once done. Good luck with yours.
update the controller buddy
Hey Tanner, thanks a lot. I ended up replacing this with a new Traktor Kontrol S2 MK II.
The one on the video had an issue with the mother board, apparently.