Just clicked on, gotta say, that’s one good lookin flatty. Quick side note, when setting up take/trail angles be sure to note that the Knuckle springer is an inline rear fork along with the VL style springer and the Panhead springer uses an offset rear fork for their springer and it WILL affect your angles. Can’t remember the measurements for the factory knuckle to pan difference off the top of my head. On a stretched front end, even with stretch in your frame down tubes and backbone to keep the rake somewhat closer to the original angle of a wishbone rigid somewhere around 32* the difference between the two forks will definitely be noticeable whether using a 21” wheel or as small as a 16”. The offset springer feels heavier every time. Anyway, great video, really enjoy seeing old iron on here.
Hey there. I just wanted to send a message and ask if everything is good with you. I was following your videos and then there was none. I hope you’re doing good. I hope you’re still wrenching. I look forward to your newest video. Take care. Gus
Everyone wants to know why Sugar Bear springers handle easily and you can ride a long & low chopper with 1 hand @ 70mph.. it's due to the trail number. This is why when ordering one he wants the rake and stretch of your frame and he builds it to those numbers. He has said the magic number he aims for in interviews that he's done..
Gentlemen, great video! Just one question.... Id like to build a low softail (evo engine). Shall i look for a 18 or 20 inch springer fork? And what type of bridges are needed? Thx in advance !!
I run 8 over on a 40 degree neck custom framed built 80 evo. Everyone tells me how bad it must ride... and i ride more than they do on their land yachts. I also run a 180 bagger rear tire at 12 lbs pressure with full pressure front. Its not for everyone.
I don't have much experience with bike building but I've built other stuff. I'm guessing long front end choppers don't land in the sweet spot for trail?
Just clicked on, gotta say, that’s one good lookin flatty. Quick side note, when setting up take/trail angles be sure to note that the Knuckle springer is an inline rear fork along with the VL style springer and the Panhead springer uses an offset rear fork for their springer and it WILL affect your angles. Can’t remember the measurements for the factory knuckle to pan difference off the top of my head. On a stretched front end, even with stretch in your frame down tubes and backbone to keep the rake somewhat closer to the original angle of a wishbone rigid somewhere around 32* the difference between the two forks will definitely be noticeable whether using a 21” wheel or as small as a 16”. The offset springer feels heavier every time.
Anyway, great video, really enjoy seeing old iron on here.
Hey there. I just wanted to send a message and ask if everything is good with you. I was following your videos and then there was none. I hope you’re doing good. I hope you’re still wrenching. I look forward to your newest video. Take care. Gus
Looks great!!! Very informative video
Looks way better, good move.
Everyone wants to know why Sugar Bear springers handle easily and you can ride a long & low chopper with 1 hand @ 70mph.. it's due to the trail number. This is why when ordering one he wants the rake and stretch of your frame and he builds it to those numbers. He has said the magic number he aims for in interviews that he's done..
Hey there,,, hope everything is ok with you,, miss seeing your videos
So I take it that my trail at 8.5 is not except able? That's probably why my bike handles like crap! Thanks for your video it surely is appreciated.
Yea looks cool with the 4 over
Gentlemen, great video!
Just one question.... Id like to build a low softail (evo engine). Shall i look for a 18 or 20 inch springer fork? And what type of bridges are needed? Thx in advance !!
Looking Good 👍
How did the rake of the neck of your bike change!?!? Did u do any welding ?
I run 8 over on a 40 degree neck custom framed built 80 evo. Everyone tells me how bad it must ride... and i ride more than they do on their land yachts. I also run a 180 bagger rear tire at 12 lbs pressure with full pressure front. Its not for everyone.
A slappy lifter is a happy lifter!
I don't have much experience with bike building but I've built other stuff. I'm guessing long front end choppers don't land in the sweet spot for trail?
18 over stock neck breakin necks
Looks good.
Go with a 3 posission Triple Tree .
💥👍👍👍
What rims are those? I need some aluminum rims in my life
The back is a borrani the front is an akront i think.
I would like to know How to measure the length of rockers ?? because I want to instal the custom forck 1.5 mt with custom rockers... who can help me ?
Way better
well he didn't knock the bike off the bench....!.
Why in the world would you make a video when you don't have any idea what you are doing...ridiculous