2007 KIA SPECTRA BRAKE LIGHT SWITCH REPLACEMENT

Поділитися
Вставка
  • Опубліковано 30 січ 2025

КОМЕНТАРІ • 44

  • @kevinlange5930
    @kevinlange5930 3 місяці тому +1

    You saved my ass. All the lights out. Changed bulbs, did nothing. Fuses good. Saw your video and $20 and 10 min later it's fixed!!!! Good advice to use wood or something to depress the pedal.
    You can also buy the part and unclip the plug and put it into new part before you swap to confirm.
    Worked perfectly man. Made me look like a genius in front of my gf.
    Appreciate it.

    • @MarkPuke13
      @MarkPuke13  3 місяці тому

      @@kevinlange5930 appreciate it!! Thanks for watching share and save for future jobs!!

  • @sarafrank9040
    @sarafrank9040 2 роки тому +3

    Just used this video to replace my break switch, thanks for your help!

  • @alejandroperalta6953
    @alejandroperalta6953 Рік тому +1

    Thank you for this video!! Came in clutch!

    • @MarkPuke13
      @MarkPuke13  Рік тому +1

      Youre welcome thanks for watching

  • @JacobRomans-t1f
    @JacobRomans-t1f 5 місяців тому

    GREAT 👍 JOB!
    You're hired.
    When can you come do my 2006 spectra brake switch?

    • @MarkPuke13
      @MarkPuke13  5 місяців тому

      Thanks 🙏 happy wrenching.. hope you liked this DIY 💪 video

  • @quadearjones4240
    @quadearjones4240 8 місяців тому +1

    Thanks bro

    • @MarkPuke13
      @MarkPuke13  8 місяців тому

      I thank you as well for watching and happy wrenching

  • @yahir089
    @yahir089 2 роки тому +1

    Do I need to remove the battery before I do the paperclip thing on the terminals.

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      No you need power bud! just be careful and do at your own risk 💪 i wont not liable for any problems that may happen! But other than that happy wrenching!

    • @yahir089
      @yahir089 2 роки тому +1

      @@MarkPuke13Thanks for replying, one more thing does the car need to be ON to disconnect the wire that's connected with the brake light switch.

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      @@yahir089 yeah leave it on so the brake pedal can compress but not started! Cause if the cars off its gonna be hard to push in the brake..

  • @IboxingkangerooI
    @IboxingkangerooI 5 місяців тому +1

    would it be the same issue if all the brake lights dont work? as in they dont turn on

    • @MarkPuke13
      @MarkPuke13  5 місяців тому

      No might want to check your bulbs/connectors/wires/ fuse.. sorry might be alot of checking till you find the main problem

  • @trevorchelseascott1327
    @trevorchelseascott1327 2 роки тому +1

    I have an 07 spectra and my brake light switch connector is a 4 prong receptacle, i tried the paperclip trick on all 4 to connect the circuit and it lit up the tail lights but not the brake indicators. Suggestion?

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      Might be the wiring and or Fuses!!! Check the fuses!!! Good luck and happy wrenching!!

    • @trevorchelseascott1327
      @trevorchelseascott1327 2 роки тому +1

      @@MarkPuke13 tha ks for the reply, yeah the fuses look to be ok both in the cabin and under the hood. I hope it isnt the wiring harness

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      @@trevorchelseascott1327 might want to check that or even the bulb itself

  • @rubengarcia5408
    @rubengarcia5408 Рік тому

    Do you have a video showing how to tighten the accelerator cable, and my gas pedal is loose when I step on it.

    • @MarkPuke13
      @MarkPuke13  Рік тому +1

      No but check it on your throttle body

    • @rubengarcia5408
      @rubengarcia5408 Рік тому

      @@MarkPuke13 so there is no way of tightening the cable?

  • @joslynabraham4865
    @joslynabraham4865 2 роки тому

    Thanks so much I been getting mad at my car it was the relay first cause the lights didn’t light at all. Now it’s the break light switch 🥲. But she about to get fixed and back on the road thanks to you.

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      Thank you 😊 my goal here is done!! Now remember this and pass the knowledge on to others! 💪 stay safe and enjoy life!!!

  • @antsmith135
    @antsmith135 2 роки тому +1

    Great video

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      THANKS!! HOPEFULLY IT HELPS

  • @mrstanskaggs1
    @mrstanskaggs1 3 роки тому +2

    can this cause the P0703 error code to happen?

    • @MarkPuke13
      @MarkPuke13  3 роки тому

      possible its for stop lamps i believe the circuit..and switch b

  • @izzyMACHANAO
    @izzyMACHANAO 3 роки тому

    🤘

    • @MarkPuke13
      @MarkPuke13  3 роки тому +1

      Thanks my bro!! Miss ya stay rad and see ya soon

  • @xFearGodx
    @xFearGodx Рік тому +1

    Mine has the tail lights work fine but not the brake lights

    • @MarkPuke13
      @MarkPuke13  Рік тому

      Check wiring and circuit/fuses

    • @xFearGodx
      @xFearGodx Рік тому +1

      Ended up being the brake switch! Thanks for the vid bro

    • @MarkPuke13
      @MarkPuke13  Рік тому

      @@xFearGodx for sure happy to help

  • @Witness1037
    @Witness1037 2 роки тому +1

    I have the opposite problem tail light doesn’t work but brake light does work

    • @MarkPuke13
      @MarkPuke13  2 роки тому +1

      Check the bulb or balister and wiring!! Good luck

    • @Witness1037
      @Witness1037 2 роки тому +1

      @@MarkPuke13 thanks man!

    • @MarkPuke13
      @MarkPuke13  2 роки тому

      @@Witness1037 youre welcome
      Thanks for watching and happy wrenching

  • @JacobRomans-t1f
    @JacobRomans-t1f 5 місяців тому

    WTF issue with that steering wheel?
    Foam eating termites?😅😅

  • @ghostkid1750
    @ghostkid1750 2 роки тому +1

    Mines the opposite