2011 2012 2013 2014 Hyundai Sonata Spark Plug Replacement

Поділитися
Вставка
  • Опубліковано 15 лис 2024

КОМЕНТАРІ • 31

  • @randonmangtamag9864
    @randonmangtamag9864 Рік тому

    Thanks man such a great help

  • @bishop7534
    @bishop7534 4 роки тому +17

    It's easier to take all the coils off together and place them on the side, no need in disconnect if not changing them out.

  • @AYVYN
    @AYVYN 2 роки тому +5

    Pull out wire, remove ignition coil, remove spark plug. Repeat in reverse.

    • @madb9422
      @madb9422 Рік тому +1

      Don't need to do that. You can keep each attached.

  • @erinanthony7443
    @erinanthony7443 3 роки тому +2

    This was so awesome

  • @6atlantis
    @6atlantis 3 роки тому +6

    How come they say not to use anti-seize and there are no torque specs because there’s a crush washer?

  • @meka2811
    @meka2811 3 місяці тому

    Thank you!

  • @kham078
    @kham078 2 роки тому +1

    Thank you so much so helpful!!!

  • @macduff1956
    @macduff1956 5 років тому +11

    You don't need to unplug the coils.....

    • @kevinriles8093
      @kevinriles8093 5 років тому +1

      You sure?

    • @macduff1956
      @macduff1956 5 років тому +6

      @@kevinriles8093 I just did the job this week without removing the coils plugs
      ua-cam.com/video/bIT6DfgYvd0/v-deo.html

    • @kevinriles8093
      @kevinriles8093 5 років тому +3

      @@macduff1956 ok thanks man,

  • @newphone3594
    @newphone3594 3 роки тому +3

    does the engine have to be cold or hot when you open spark plugs?

    • @drgfataldeath
      @drgfataldeath 3 роки тому +5

      Better to do this when the engine is cold. So you do not burn your hands or arms

  • @6atlantis
    @6atlantis 4 роки тому +2

    What do I set the torque wrench at for 2012 sonata plugs?

    • @unovere
      @unovere 3 роки тому +1

      If you read the repair manual it should tell you. But normally between 15-20 ft/lb.

    • @6atlantis
      @6atlantis 3 роки тому +5

      @@unovere actually it doesn’t and the instructions for new plugs say no anti seize which is odd, and they have a crush washer so just tighten firm then less than another quarter turn with ratchet. Idk.....

  • @odavid2580
    @odavid2580 5 років тому +3

    Is this the same for Sonata 2010 v4? and how long did it take to complete?

    • @SuperScarface109
      @SuperScarface109 5 років тому +1

      Probably it's the same taking into consideration that Hyundai uses the same design for their engines

    • @rahshonhicks3495
      @rahshonhicks3495 2 роки тому

      Less than 45 mins

  • @harith7260
    @harith7260 2 роки тому

    هاي شلون گدرت تفتح البلك بايد وحدة؟ 🤔

  • @stevensanchez8230
    @stevensanchez8230 4 роки тому +1

    What if someone mixed up the correct order of the coil packs how do I figure out the rite way they go again???

    • @bishop7534
      @bishop7534 3 роки тому +4

      Shouldn't be possible being the wires are lengthen to fit specific plugs..

    • @asdquet
      @asdquet Місяць тому

      It doesn't matter. They're all the same.

  • @nonagrams4656
    @nonagrams4656 3 роки тому

    Do you know the firing order?

  • @scottyofeden
    @scottyofeden Рік тому +1

    Does anyone know if the "turbo" version (Sonata 2011) has wires that need to be replaced as well? I've seen multiple videos that go over spark plug replacement... and none of them mention the wires. Thanks!

    • @madb9422
      @madb9422 Рік тому +2

      No. It has coil packs & they don't need to be replaced unless you have an issue.

    • @scottyofeden
      @scottyofeden Рік тому

      Thank you!@@madb9422

  • @LifewithNicoll
    @LifewithNicoll 5 років тому

    What’s the spark plug gap ??

    • @DoritosRus
      @DoritosRus 5 років тому +6

      Adrialey Ramos iridium plugs come pre gapped from manufacturer