Great video! Thank you for the tutorial. I am having issues with my new .2 mm nozzle. I am getting warping and edge peel that I did not get on my .4mm nozzle. Tried printing with a brim and it lasted longer but still failed. Right now I am printing witha brim and with my part colling turned off. Any other advice here?
@@NeoKoiPrints I’m working on an A1 so it’s not in closed (I do have an x1c but don’t want to keep swapping that nozzle out. I am considering a hot swap option)
@@NeoKoiPrints I had turned off all the fans in the room (that was my thought too. But to no avail.) Cleaned the build plate but haven’t tried a different one yet.
This is what we need, short to the point and about something specific. Concentrating on a section of options at a time was the ways to go. Thanks.
Great intro to the program Thanks
consider 1080p
What do you mean?
That I you for the tutorial!!!!
Great video! Thank you for the tutorial. I am having issues with my new .2 mm nozzle. I am getting warping and edge peel that I did not get on my .4mm nozzle. Tried printing with a brim and it lasted longer but still failed. Right now I am printing witha brim and with my part colling turned off. Any other advice here?
Enclosed or not enclosed?
@@NeoKoiPrints I’m working on an A1 so it’s not in closed (I do have an x1c but don’t want to keep swapping that nozzle out. I am considering a hot swap option)
@rotciv1577 im wondering if some cold air is hitting an edge, or if the plate is dirty
@rotciv1577 maybe slow it down a little bit
@@NeoKoiPrints I had turned off all the fans in the room (that was my thought too. But to no avail.) Cleaned the build plate but haven’t tried a different one yet.
Who are those people that say it’s too complicated? If you know anything about printing and how bamboo lab works, it’s easy.
A lot of people don’t understand either
@ 14:09 the button for the slider you're adjusting turns yellow. What does that mean?
Its controlling your top most slider that controls the depth of the mesh in dynamic