Це відео не доступне.
Перепрошуємо.
Your Bicycle Wheel don't Move. How To Maintenance Bike Freehub
Вставка
- Опубліковано 10 сер 2024
- Hello cyclists !
Bicycle wheel don't move. In this video tutorial, I will show you useful information.
How to remove a bike freehub body on a bike wheel.
You will see a lot of tricks that used in the bicycle workshop.
One of them is a magnet. With help magnet You won't lose the bearings.
Bike Freehub SHIMANO FH-RM30. This is a very popular bushing. Inside, it has a classic design, Very common on bikes.
The result of such dirt is riding in wet weather, when dirt gets on the hub, rain, snow or slush.
How to clean a bike freehub body. It is very important to clean everything perfectly!
Dirt should not remain. Take this maximum attention. Watch the video to the end so that you know all the subtleties of this bicycle hub maintenance.
How to degrease a bike freehub body. We use isopropyl alcohol for cleaning.
Then use wet wipes as well as dry wipes. The bicycle hub must be perfectly clean, before installing it back.
Need to lubricate the seats for doggie frivilla bicycle hub.
How to lube a bicycle freehub body. This grease is sticky, it will not only lubricate,
and also to help establish small balls (bearings) to their seats.
Now I will show you how quickly and easily qualitatively, you can clean the bearing balls.
We sprinkle isopropyl alcohol and wipe them with a dry cloth in the palm of your hand.
Then pour the balls into a clean container. The next trick is how easy and fast fill the balls into seats.
How do you like this life hack? Write in the comments) Install a bicycle freehub body on a bike wheel.
We collect everything in reverse order. Let's not forget the extra details.
Top lock nut, screwed against clockwise, do not miss this moment! Now it's different! Testing bike freehub after maintenance.
Thank you for watching! Necessarily. Put likes! subscribe to the channel
Don't miss our other video tutorials! Good luck!
DIY with ASMR
#workshop #asmr #bicycle
00:00 Bicycle wheel don't move
00:32 How to remove a bike freehub body on a bike wheel
01:03 Freehub shimano fh-rm30
01:44 How to clean a bike freehub body
02:30 How to degrease a bike freehub body
03:55 How to lube a bicycle freehub body
05:43 Install a bicycle freehub body on a bike wheel
07:51 Testing bike freehub after maintenance
🆗🎥🚲
Write in the comments, what you would like me to do in the new video.
❓❔❓
Ask your questions in the comments
👇👇👇
![700(622)公路車後輪輪組 (雙層快拆C煞-鎖牙花鼓-法式氣嘴孔)[04001394]【飛輪單車】](/img/n.gif)
❤ If you liked this video,
🙏 share this video with your friends
📈 it will help the development of the channel!
❓ ask your questions
Attention to detail is great. You made me smile with your bearing installer. Put a patent on that.😊
You deserve more subs, seeing a bike video like this is satisfying. Keep it up 👍
Very good job, i like your channel 👍
Great video, thank you!
Thank you for your feedback! 😘
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
good work
Dobra Robota precyzja Pozdrawiam serdecznie Poland
Top de mais 👏🏻👏🏻👏🏻👏🏻
Qual o produto que você usa para tirar graxa esse spray?
06:04 i can't see the layout of the washers, but the thickest washer must be at the bottom, because if the thinnest one is at the bottom, it can deform and block the sprogs, which happened to me once
thanks for the advice ! 😘
Very small point, never work with paper cleaning wipes in the mechanics, risk of residual material. Cloth wipes are cleaner work.Other than that, nice vid, I'm going to follow this one to solve my problem.
Belo vídeo de manutenção! Qual cubo é melhor, com esferas ou rolamentos? (pouca manutenção)
Rolamento é melhor, da menos problema
Дякую за цікавий контент, чи підійде для очищення засіб для очистки гальм авто і яке мастило порекомендуєте, дякую
Mantep 👍👍👍
Te salut! Ce vaselină folosești/recomanzi?
뒷바퀴 허브는 보통 몇km타면 전체 청소해 주나요??
wd40 을 자주 뿌려줘도 문제일까요??
Ottimo video, molto utile. Poi darmi indicazioni sul modello di chiave che hai usato, non riesco a trovala
Grazie
what kind of head is needed to remove the drum ?
Jakiego smaru używasz
Nice Video. Can you name the tool that you use for unfixing the freewheel body?
Thank you!
His instrument doesn't have a name.
Google it exactly as you wrote to me and I think you will find such a tool.
Thanks
Can u put links for purchasing the magnet attracting tools ! N others tools used ?!
Thanks
he should have De -Magnetize the bearings before reinstalling! no good... becuz that will prolly cause damage in the future...
thank you for the video 🌴🌴🌸🌸 minute 07:08. aim counter clock wise, not clock wise....
Thank you for your feedback! 😘
사장님이 쓰시는 그런 묽은 구리스는 어디서 구입할 수 있나요.
Все круто показано, але я єдине що не зрозуміло, чому не була змазана зубчатка касети, вона ж не має працювати на суху, треба хоча б пару капель масла для неї.
What is the needle on your syringe? Nice stuff.
This is a nozzle for flux or glue. You can find them in electronic component stores and on Chinese marketplaces
Whats that thing u use in 0:29?
What grease are you using.
any, softer -better
que herraminetas son las que se utilizan y la grasa de cual es? saludos!
La herramienta de extracción de la carcasa del piñón libre es necesaria para abrir el piñón libre y la grasa de calcio se utiliza para la lubricación. Espero que los nombres estén correctamente traducidos al español.
bonjour
je recherche une bonne graisse au lithium pour mon velo, vous avez des préférences ?
ps très bonne video
@@NiceBikeService d accord merci beaucoup :) 😀
Ola qual o tamanho da esfera que vai dentro do Free hub? Obrigado.
@@NiceBikeService sim, é 1/8" , obrigado.
You use very little grease for the bearings on your freehub where others use the "whole container". Which is the proper "amount" for overhauling a freehub or does it matter?
A thin layer of thick grease is sufficient; if you apply too much grease, the pawls will begin to "stick"
@@NiceBikeService Thank you!
What company make that tool to get that cone out
I'm sorry, I don't quite understand what cones you're asking about
5:51 - Ciekawe dlaczego shimano stosuje tylko dwie zapadki zamiast np. trzech? Trochę dziwnie to wygląda. Za duże straty energii? Za duży hałas?
@@NiceBikeService You meant ,"THREE AND FOUR PAWL VERSIONS EQUISPACED" .
Can I remove it without the special tool? Can I use something from around the house as a tool?
Or should I buy the tool.
I made a freehub bearing race removal tool on CNC .
what tool you have around the house
@@makantahi3731 Everything except the freehub removal tool.
Im sorry what is the green yellow paste?
it`s thick calcium grease Divinol
Yo tengo una maza shimano fh-tx505 pero no truena nada por que motivo sera ...?
What grease are you using?
@@NiceBikeServicecalcium greese that i could find doesn't look like what you are using.
Не зрозумів, невже у барабані 2 ряди кульок?
Для колеса би якусь підставку, щоб шпиці не шкрябати і не гнути при затягуванні)
AAaaaa to teraz wiem dlaczego czasami (narazie doś rzadko) kaseta nie napędza koła jak pedałuję. Poprostu te blokady mi nie opadają. A miałeś tak że jadąc bez pedałowania kaseta nadal chce obracać łańcuchem?
لذيك اعوجاج في حامل الكاسيط.
True mechs dont use gloves. Nice bro.
Gloves alter dexterity of ones hands, but heard and seen many cases where infection might develop and one might even lose a finger. Better to be safe than sorry. Having said this, I too skip gloves way too often when working on dirty ass bikes.
yeah till u loose your fingers ^^ thats something u willll never hear of in the media, but it happens every day . i know people myself who lost hteir fingers due to working on i the bike and getting infected and lossing their fingers just from a super tiny scatch
Buonasera,le sfere all'interno che diametro sono?
mai misurato
My grabber thingies are not popping back up anymore , what should I do ?
Mine too
Please help if you found solution
00:27 because both sprogs don't engage at the same time, I was on a steep hill and only 1 sprog engaged and the cassette body became deformed(magura julie)
I sympathize with you. I hope you made it down the mountain without any injuries.
@@NiceBikeService good thing of climbing is that it does not require power if i have to return on starting point( some old tale says: and shit can go downhill if is enough steep)
Tu es toujours
there is no two slots on the cover of my Shimano freehub like yours. i don't know why. can you tell me how to open it? 😢
The bearing race cap would have been shrink fitted and not to be removed as is the case with a few lower - end hubs like FALCON AND PROWHEEL OR NL INDUSTRIES , ,for example .
Thanks for the content. Slava Ukrajini
Героям слава! Дякуємо за відгук!🇺🇦😽
1.20 minutes complex
Thank you for your feedback 😽
أللهم صلى وسلم وبارك على نبينا وحبيبنا محمد صلى الله عليه وسلم ❤❤❤
How many ball one side?
inside 22/outside 24 ?
there may be a different number in different freehub models
Where can I find the tool to open de freewheel body? 00:29
you can made it from ratchet bit
My bikes pawls aren't springing up , how do I fix it
It's already clean
フリーハブ本体=ボディは外してないね。例えば3:04で映っているのは中子(なかご)というパーツで、ボディ本体は例えば4:01でグリスを縫っているほうのカタマリだよ。大きな六角レンチと専用工具でボディを外し、ハブバレルとハブシャフトまでばらしてメンテナンスする。タイトルは、スプロケットのフリー回転が渋いときの簡易メンテナンス方法 が正確だね。
コメントありがとうございます。言語が違うので、翻訳が少しおかしいかもしれません😺。
Eu trocaria a roda hhahaha
É também uma boa maneira de😹
eso es un mecánico de verdad, trabaja sin guantes...
@@NiceBikeService mira, tengo varios amigos bicicleteros, y saben cómo vos, y ninguno usa guantes, ojo, esta bien cuidarce las manos, pero a mi también me gusta hacer el mantenimiento de mis bicis sin guantes.
00:11 that is why here must not be grease
The main thing is to grease in the right places😺
Momwere ragaca problema maq da risi bralia mainteresebs habze
A have deore xt rear hab and hub body flexing out whyy ? How to fix it
@@giorgi5936 remove one metal ring
De utálom ezt a fajta kazettát :D
⚠ ❓ ⚠
*ASK YOUR QUESTIONS*
👇👇👇
u didnt demagnetize the bearings ? u better should ^^
man, fuck off the axle in the rear hub, which can't be made of a tube, because it will twist anyway
03:05 these internal teeth can be reshaped by flat diamond file if are deformed or worn
In some cases, we polished them
Co to za smar którego używacie??
Wat а smar?
cara, foda-se o eixo do cubo traseiro, que não pode ser de tubo, porque vai torcer de qualquer jeito
Esta bucha é muito valiosa para o proprietário da bicicleta😺.
💯👍💶
03:18 no, grease can be only on balls
👍
I miss the days of the freewheel. Every time my chain stretched, I would replace chain and freewheel, getting all new bearings, spring and pawls. Now, the cassette has destroyed bicycling with index shifting, and outrageously expensive shifters and drivetrains. I miss the days of downtube friction shifters, no housing, just a direct connection to the derailleurs, I never wished back then we had indexing, the skill of shifting with these simple levers was earned and never a problem. I hate how technology has made the bicycle worse over the last 50 years and finding parts sometimes impossible. You simply went to the bike store and said I need a chain, they fit every bike. Freewheels could be built up to have any gear ratios you wanted. Cassette gearing today, and gear ratios are all wrong unless you buy a very narrow range like a 14-23. Currently I have a good setup for flats and limited mountain climbing for the road: 22-32-42 chainrings, and a: 12-13-14-15-17-19-21-23 for an 8 speed cassette 24 speed (minus repeats) bike.
Thank you for your story, very interesting and informative. In our country, many years ago, there were terrible bicycles on which it was impossible to ride comfortably. Therefore, we are now happy to use new technologies.
me, as an more extreme performing biker than you, obviously prefer the parts and standards of today, because they are simply way better for top performance. Watch DH racing in the 80s the 90s and now ^^ which bikes are obvioulsy more ez to ride ? and by that bringing more safety into riding at all ?? ^^ YES
@@r0ns0n0l That is precisely it, you hit the nail on the head. Racing and recreational bikes have nothing to do with each other, I road raced professionally in the 1980s, I used Campagnolo Super record and custom made frames. But today, I don't need or want any of that. Today I have the strongest recreational bike in the world, the most dependable and costs under a grand. Road and off-road has very little to do with each other too. I bought the first commercial mountain bike back around 1982 and have been gravel riding and off-roading for over 40 years.
@@WildernessMusic_GentleSerene yes , i have xt hubs with cones and balls ^^ most enduring if serviced well. and i think below abec 7 thyre even better for bottom bracket too, especially for road, yes ^^
The cog type cassettes with the freewheel built in to the cog used to break axles
But apart from that I agree completely, I've landed on 22-32-42 and 8 speed 11-34
The cassette is comparatively cheap - £20 not the £150 for the SRAM 14 speed one shifter set up, oh and I've got 175mm cranks
The chain I use is KMC 7 speed in brown steel, these last twice as long as the recommended 8 speed ones
I too am convinced they've moved to this stuff that wears out every five minutes to increase sales
Beyond that I'm a bit miffed seeing this video, I've just replaced one of these and I could have serviced it. Then again I'd have needed the tool, maybe I can improvise something next time now I know it's a left hand thread
I'm surprised to see the ball bearings not being replaced as a matter of course though
Mit Diesel wird richtig sauber.
wait only 2 dogs here not 3 ?!!?
they are not symmetrical
@@NiceBikeService ok it is normal but why not to put them opposite to each other
LOOOOOOOOOOOOL
Incredibly poor design. Only two pawls. So bad.
The manufacturer decided to save money, but users and nail technicians are in trouble
@@NiceBikeService Of course, I know. Te strange thing is, you have to go very high in price if you want to get something decent quality. Not even Shimano XT or XTR good enough with their latest freehub body design. That is also very poorly designed staff, lots of people have issues with them.
Please use gloves 😉
gloves r for girls😂
@@NiceBikeService just use latex gloves bro
@@sashabagdasarow497 Sounds like a waste
@@climatechangedoesntbargain9140 nah, very good, and keeps hands tender and soft :)
Something you'll appreciate if you do something meticulous/accurate, but wanna repair your bike too
Grease keeps your hands tender and soft.
New freehub on my bike but ive started to hear a slight tinking sound when im pedaling😢Im sure its coming from that area. When one thing goes wrong with the bike everything else comes out in sympathy with it. A pain in the ass😅
Super vidéo Merci pour votre aide
( Dieu te cherche, Clic sur le Smiley)