1942 Omega 30T2 assembly and lubrication after cleaning

Поділитися
Вставка
  • Опубліковано 10 січ 2025

КОМЕНТАРІ • 22

  • @martinowl
    @martinowl 11 місяців тому +2

    Another great job done. I’m no watch expert, but these older Omegas, certainly seem to be very good quality.👍

    • @Karol235
      @Karol235  11 місяців тому +1

      Thank You

  • @manuelsuazo1125
    @manuelsuazo1125 Рік тому +2

    This wacht reminds me of the one I inherited (cal.23.4SC ) from my father, who inherited it from his father and this one from my great-great-grandfather.4 generations.

    • @Karol235
      @Karol235  Рік тому +2

      a very old watch, and a very good one. I made several of these and even though they were about 90 years old, they still worked great
      Regards
      Karol

    • @manuelsuazo1125
      @manuelsuazo1125 Рік тому +1

      @@Karol235 by the serial number, it is between 1934 and 1939, probably 1938, plus an interesting case ref CK 650.
      unfortunately it requires a little more love, but in Chile is difficult to find watchmakers who see antiques, luckily I found the son of the one who probably my great-grandfather bought it, and today it is running badly but it runs, it is delayed several minutes a day.
      But my father could not use it for many years because he had a little accident when he retired.

    • @Karol235
      @Karol235  Рік тому +1

      @@manuelsuazo1125 A very common problem in such old watches is the main spring

    • @manuelsuazo1125
      @manuelsuazo1125 Рік тому +1

      @@Karol235 has a handmade piece, which holds the central gear in position (I am not a watchmaker, but an engineer).
      I suspect that's the problem, but I don't have many options to compare, the watchmaker did what he could and let it work is fine, the perfect is the enemy of the good.
      thanks for the suggestion but I already changed the spring last year.

  • @watchsixto
    @watchsixto Рік тому +1

    That is a stunning restoration

  • @mikes.2471
    @mikes.2471 4 місяці тому +1

    Thanks for showing which parts to lubricate though it would have been great knowing which lub to use for each friction point. I had google that blue grease so I think you used Moebius 9501 on the winding mechanism. The rest I will find out from another lub video.

    • @Karol235
      @Karol235  2 місяці тому +2

      Thank You, blue grease 9504

  • @pipodorologio1648
    @pipodorologio1648 Рік тому +2

    great workthrough, thanks for sharing.....👍👍

  • @justynamarchew7331
    @justynamarchew7331 Рік тому +1

    Good job !

  • @camillehazard3586
    @camillehazard3586 21 день тому

    Which oil did you use ? ❤

  • @richardadelberg8961
    @richardadelberg8961 17 днів тому

    Did u leave it with 8.8 beat error?

  • @jakerandell1062
    @jakerandell1062 11 місяців тому +2

    hello
    can you make a new hairspring for omega like this? video ua-cam.com/video/aSE0NbAqOIs/v-deo.html
    I've got the same watch as this (omega 30t2) and the hairspring was completely destroyed, a overcoil hairspring is impossible to find and you are correct on that, for 6 years, i have not found one watchmaker or even omega accreditor who can repair my omega with new hairspring to make. even omega authorized service centres does not have spare omega hairspring. Would you be willing to repair my omega with a new hairspring like you did in this video? I'm from the US by the way.

    • @Karol235
      @Karol235  11 місяців тому +1

      hello, there are lots of parts on wbay. spring for 30r2 is no problem. the whole mechanical mechanism too. there's no point in doing it all over again. the fastest and the cheapest is required. younger 26x/28x calibers are also suitable. they were 30t2 with anti-shock. I don't know which one you have. but you can replace the entire balance at a price lower than repair with a guarantee of good operation

  • @hipphipphurra77
    @hipphipphurra77 3 місяці тому +1

    The timing does not look healthy
    +297s/d
    311° amplitude
    8.8ms beat error

    • @Karol235
      @Karol235  3 місяці тому

      the result is very good, 300 degrees amplitude is a very good result. do not judge the initial measurement, only the final calibration ;)

    • @richardadelberg8961
      @richardadelberg8961 17 днів тому

      What was final calibration?