Freightliner Cascadia: Park Brake Air Low, Brakes May Drag Warning

Поділитися
Вставка
  • Опубліковано 2 лют 2025

КОМЕНТАРІ • 48

  • @paramjitmann9813
    @paramjitmann9813 8 місяців тому +4

    Just bought 2022 with this problem. Thanks for Very simple video.

  • @Myunsolicitedthoughts
    @Myunsolicitedthoughts 8 місяців тому +4

    This had been driving me freaking crazy!!!

  • @rubberduckyconvoy2723
    @rubberduckyconvoy2723 2 роки тому +3

    Thanks driver. I am Owner of 2019 Cascadia. The mileage is 455,000 I will replace tomorrow that sensor

  • @blown0595
    @blown0595 Рік тому +3

    This was a great video, straightforward and good camera work, thank you

  • @Primetimelando
    @Primetimelando 8 місяців тому +1

    Thank you, I am currently going through this, now I know what to do

  • @jasmine-cb4no
    @jasmine-cb4no 2 роки тому +2

    I’m looking for that problem how to do repair now! Your saying in your channel right now! When I get back to repair it! Thank dude

  • @Harman55295
    @Harman55295 Рік тому +1

    Thank You for making this video….. It helped me in replacing it easily

  • @booyakashaboy7250
    @booyakashaboy7250 3 місяці тому

    Since this happens so often it seems more like a manufacturers defect in the switch mechanism. Mine just started doing this on & off. Beeps the damn horn when I open the door thinking I didn't apply the brakes. Damn PITA! I suspect mine's going because of moisture corrosion buildup in the valve. The governor spit valve is kinda wet though I get no water coming out of the drain cable valves which is weird. I'm thinking of getting a new switch but will try to either take apart the old one first, clean and lubricate it and see if that may fix it. I'd like to use a grease that won't easily wear or wash off by pressure and moisture like an antiseize, marine or a ceramic synthetic type grease. If successful not only does this save money by not risking breaking plastic tabs on the covers or risk over tightening the valve like another guy did, stripping the brass threads and having a costly replacement of the whole unit. But I'm also a cheap b@stard ao there's that. We'll see how it goes.

  • @orpheus1662
    @orpheus1662 Рік тому +2

    I’ve a 2019. And this only happens when I hook into a trailer. Any tips. And how much is that sensor. Thanks a lot

  • @govinlama6152
    @govinlama6152 5 місяців тому

    God bless you all ❤❤❤❤ drive safe.

  • @deejaydhillon8415
    @deejaydhillon8415 Рік тому

    Thank you great video, saved me $$$ did it myself. However the part has changed, it looks like a red switch now. The parts guy said they have had so much problems with this switch so they use a different one now. Will have to buy a connector for new switch also.

  • @MaiTran-ym4xi
    @MaiTran-ym4xi 2 роки тому +2

    Thank you for your video clips, it's really helpful. My husband's truck has a same problem, now it solved 👌 🙂 👍

    • @Bigzero.Scratcher
      @Bigzero.Scratcher 2 роки тому +1

      Just had this same problem yesterday 😂

    • @Bigzero.Scratcher
      @Bigzero.Scratcher 2 роки тому +1

      Yea i got it fixed the same day thanks for s great video

  • @jimmck6995
    @jimmck6995 25 днів тому

    is there any way to bypass that annoying warning sound temporarily until you can get the part??

  • @franklincampbell8774
    @franklincampbell8774 Рік тому +2

    Mine in a 2012 isn't the same as this one mine only has a red switch and only one with a plug the rest have prongs

  • @dostahamza7464
    @dostahamza7464 10 місяців тому

    Thank you🙏

  • @cascadia7244
    @cascadia7244 Рік тому

    I'm currently having the same problem. I'll be looking to replace this switch myself. Thank you.

  • @josechavez5855
    @josechavez5855 Рік тому

    Have you had an issue with door honking stating parking breaks not applied and obviously are applied 😅

  • @Pakistansave
    @Pakistansave Рік тому

    Thanks for uploading the video. I am facing same problem. I just wanna ask is there color matter like you mentioned blue & red I bought a new one it color was red is gonna be work for position mean same spot?

    • @FreightRelocators
      @FreightRelocators  Рік тому

      Someone posted in another comment that the part had been updated and the color had changed, so as long as you verify they are giving you the correct part there shouldn’t be an issue.

  • @abdinour8606
    @abdinour8606 Рік тому

    Thank you

  • @SmittyD33
    @SmittyD33 9 місяців тому +1

    Man you the mvp

  • @MrRaghavpuri007
    @MrRaghavpuri007 2 роки тому +2

    Man i did it the sensor is fixed but i can hear air.. do you know what it could be?

    • @FreightRelocators
      @FreightRelocators  2 роки тому +1

      Lots of air lines down there that you have to be careful about moving around. If it's simply one of the quick connect air lines leaking, you may be able to fix it by taking it lose and replacing the o-ring.

    • @MrRaghavpuri007
      @MrRaghavpuri007 2 роки тому

      I wiggle the sensor and it gets worse
      You think i need new sensor or just put teflon on it?

    • @FreightRelocators
      @FreightRelocators  2 роки тому +1

      @@MrRaghavpuri007 Did you get the sensor tight? Doesn't need to be real tight, just a little more than snug. Possibly overtightened and broke where it threads in at?

    • @MrRaghavpuri007
      @MrRaghavpuri007 2 роки тому

      @@FreightRelocators i think i did over-tight it maybe
      What do i do in this situation?

    • @FreightRelocators
      @FreightRelocators  2 роки тому

      @@MrRaghavpuri007 verify exactly what is leaking first.

  • @habibrahman8472
    @habibrahman8472 11 місяців тому

    Good job

  • @king53070
    @king53070 Рік тому

    Do you have to disconnect the battery?

  • @MrTmwilliamson
    @MrTmwilliamson Рік тому

    Very interesting

  • @xianreiss
    @xianreiss 2 роки тому

    My local dealer just replaced the "Blue stripe switch" and after 1 week went back to the same issue. Thinking of disconnecting the damn beeper.

    • @Slw7511
      @Slw7511 2 роки тому

      you can insert a metal paperclip into the connector, but you will have problems during level 1 DOT inspection.

  • @sdhzlgl
    @sdhzlgl Рік тому

    Now the dealer doesn't have this accessory, so I have to replace it with a new and different one, which is twice as expensive. too dark.

  • @vampboi78
    @vampboi78 Рік тому

    What the heck. My truck has done this ever since I bought it with 170k miles. It has 474k now... I just thought that's what it was supposed to do 😳