This video wasn’t the part I was trying to replace but I just wanna show my appreciation for how you recorded this video for! Not to close not to far away, easiest tutorial I’ve come across in a min! Do more videos I’ll subscribe
My speaker on the top is really quiet while on a phone call and I was wondering if I should buy the earpiece and use the old flex cable with it (or if anyone can give advice on how to sort it out)
What is that clear piece that you heat up and replace around the 2:08 and 2:22 mark? I think I may have melted mine and need a replacement. I can't find it anywhere. Thanks
So misleading, nothing to let people know your Face ID won’t work after this. Probably too late after they’ve binned the original flex. Please do it properly, it’s two tiny solder joints AND Face ID will work afterwards.
It to mention the installation of the new water seal which is very important not only for waterproof (which probably won’t be as effective compared to factory especially considering quality of the seal could be junk) but to cushion the screen and support it “flexibly” to help against cracking from slight impacts.
Wrong. You will lose faceid doing it like that. It must be a soldered replacement. Thats part of the problem with these how to videos. Its misleading. If you're going to do a video like this do it correctly.
@@obrien247 Do you know if I can replace the whole wire+earpiece easily and avoid soldering? I go the entire earpiece+wire from iFixit, but I'm not sure how hard it will be to get the wire replaced, what do you recommend?. Also...do you know if the phone will be "water resistant" after this..? or should I get something to fix that on reassembly? Thanks! EDIT: I just rewatched and this guy replaced the wire too. Doesn't that mean he does not need to solder? As the soldering points are between the wire and the earpiece?
Good day friend! I did it so, and my Face ID is not working, it shows the message for trying again later, in the set step. Are you able to tell me why, Thanks
El módulo de sonido es el que cambió el señor del video pero ese es la mitad del trabajo, con ese trabajo pierde el FACE ID...Ahora si traspasa el flex original y su información entonces queda full...
I have been .. facing low volume from front speaker , and the authorised service centre says Cleaning it will fix the issue and They said if not we have to replace the part .. Also replacement of earpiece can’t be done alone they said we have to change display along with the earpiece, WTF it’s too costly
The ear speaker mesh on the front of the phone gets clogged up muting the phone. You can either replace the mesh (cheap) or clean it with a small brush. Don’t listen to apple who only want your money.
Beware of a lack of professionalism. Working without gloves, a drop of liquid on the LCD and hiding the broken tape... think twice before publishing. But the goal is achieved!!
This video wasn’t the part I was trying to replace but I just wanna show my appreciation for how you recorded this video for! Not to close not to far away, easiest tutorial I’ve come across in a min! Do more videos I’ll subscribe
Where can I get the cleare round lens that go's on before proximity sensor
My speaker on the top is really quiet while on a phone call and I was wondering if I should buy the earpiece and use the old flex cable with it (or if anyone can give advice on how to sort it out)
is this the part i need to change if my top mic is muffled? (i don’t care about losing face id since it already doesn’t work)
Does this have the new microphone built in as well?
😂bro u broke the fount speaker strip 😂u hide very well 👌
What is that clear piece that you heat up and replace around the 2:08 and 2:22 mark? I think I may have melted mine and need a replacement. I can't find it anywhere. Thanks
Did you heat it for 5 minutes? 😂
thats just a plastice bracket that holds the ear peice and proximity sensor in place
You can get anything on ebay
So misleading, nothing to let people know your Face ID won’t work after this. Probably too late after they’ve binned the original flex. Please do it properly, it’s two tiny solder joints AND Face ID will work afterwards.
It to mention the installation of the new water seal which is very important not only for waterproof (which probably won’t be as effective compared to factory especially considering quality of the seal could be junk) but to cushion the screen and support it “flexibly” to help against cracking from slight impacts.
How to order ? can shipping to malaysia?
does the face id and true tone still works if the earpiece has been changed ?
Enryco Oetomo of course it works
No
no won't
not face id. true tone yes
yea ive done camera replacements and same
issue
Correction**** Step 1: Buy replacement kit
Does it need to reformat when iphone ear speaker change a new replacement?
NO follow me on ig same at youtube info for more help
Wrong. You will lose faceid doing it like that. It must be a soldered replacement. Thats part of the problem with these how to videos. Its misleading. If you're going to do a video like this do it correctly.
Where is soldering video ?
@@Moebeastz I don't have one but its super easy. Only two soldering points. About as easy as it comes to soldering.
or at least he should explain that or maybe he doesn't know
@@obrien247 Do you know if I can replace the whole wire+earpiece easily and avoid soldering? I go the entire earpiece+wire from iFixit, but I'm not sure how hard it will be to get the wire replaced, what do you recommend?. Also...do you know if the phone will be "water resistant" after this..? or should I get something to fix that on reassembly? Thanks!
EDIT: I just rewatched and this guy replaced the wire too. Doesn't that mean he does not need to solder? As the soldering points are between the wire and the earpiece?
@@nebulousJames12345 it’s married to the logic board. You cannot.
Good day friend!
I did it so, and my Face ID is not working, it shows the message for trying again later, in the set step.
Are you able to tell me why,
Thanks
Face ID won’t work unless you solder
You literally have to keep the same proxy flex and de-solder old speaker then solder the new speaker on the original front flex.
@@averagegamindad please don’t take videos like this as gospel.all they do is mislead you into doing something you shouldn’t causing more issues.
El módulo de sonido es el que cambió el señor del video pero ese es la mitad del trabajo, con ese trabajo pierde el FACE ID...Ahora si traspasa el flex original y su información entonces queda full...
@@averagegamindad Exacto...
Some video only wants click- they don’t care enough about your Face ID. Don’t do this if you like Face ID function.
Asi es!...con el traspaso del módulo tal cual muestra el video se pierde la función face ID..
Best video ever thank you so so easy
I have been .. facing low volume from front speaker , and the authorised service centre says Cleaning it will fix the issue and They said if not we have to replace the part .. Also replacement of earpiece can’t be done alone they said we have to change display along with the earpiece, WTF it’s too costly
The ear speaker mesh on the front of the phone gets clogged up muting the phone. You can either replace the mesh (cheap) or clean it with a small brush. Don’t listen to apple who only want your money.
@@CiderPang27 thanks man ! I have visited the store nearby they cleared my Phone’s receiver . Now Audio is very clear and loud .
@@prathamesh3044 Please tell me how they did it, I'm facing the same problem as you and I didn't get to the solution
@@3hm0od they just cleaned it … and that’s all , and it’s perfectly working
tes
You will lose the Face ID
좋습니다.
This music really pissed me off 😂
not any use, do this, and loose the Face ID, you only need to replace earpiece, how to, find another video, click baiter
This is bad, ont try this; if u do your face id will stop working!!!!
Beware of a lack of professionalism. Working without gloves, a drop of liquid on the LCD and hiding the broken tape... think twice before publishing. But the goal is achieved!!
This way u lost face id
Good bye face id
Do NOT 🚫 DO IT!!! YOU LOSE YOUR FACE ID FOREVER!!!