I feel like I met an oasis while passing through the desert. I also wanted to make a VTOL airplane, so I looked up various materials and succeeded in using the KK board to get to a twin copter. I wanted to develop it there and make a VTOL RC PLANE, and your data will be helpful not only for me but also for fans around the world. I will try hard to follow. In addition, it would be of great help if you create and upload a video related to the setting. Thank you.
ua-cam.com/video/reMSWJ2vUeY/v-deo.htmlsi=WM8tRcoADnt8cS3P See 3:45 min mark Video for KK2 Wiring Diagram and approximate KK2 settings for Fast VTOL plane. ua-cam.com/video/BbOA55SF7kw/v-deo.html Most P1 and P2 setting numbers and flight profile setting numbers are similar on all my 4 different VTOL planes, however you may need to reverse your + and - value. Obviously all servo travel and end points, reverse, curves, offsets, etc will all vary between planes. If using the BEC 5 volts from a cheap 30Amp ESC for RX and FC do not add any servos. A jambed or loaded servo can overload its BEC and brown out the FC and / or RX to reset = CRASH.
I feel like I met an oasis while passing through the desert.
I also wanted to make a VTOL airplane, so I looked up various materials and succeeded in using the KK board to get to a twin copter.
I wanted to develop it there and make a VTOL RC PLANE, and your data will be helpful not only for me but also for fans around the world.
I will try hard to follow.
In addition, it would be of great help if you create and upload a video related to the setting.
Thank you.
Приветствую. Всех благ.
Hello sir long time subscriber. I really miss your 1/64 RC conversions any chance of those vids coming back
ua-cam.com/video/reMSWJ2vUeY/v-deo.htmlsi=WM8tRcoADnt8cS3P
See 3:45 min mark
Video for KK2 Wiring Diagram and approximate KK2 settings for Fast VTOL plane.
ua-cam.com/video/BbOA55SF7kw/v-deo.html
Most P1 and P2 setting numbers and flight profile setting numbers are similar on all my 4 different VTOL planes, however you may need to reverse your + and - value. Obviously all servo travel and end points, reverse, curves, offsets, etc will all vary
between planes.
If using the BEC 5 volts from a cheap 30Amp
ESC for RX and FC do not add any servos.
A jambed or loaded servo can overload its BEC and brown out the FC and / or RX to reset = CRASH.