It sound soo much better in person, very deep sounding. I was excited when I found out that they started selling these in the States, it's the perfect beginner bike.
lucky you got it with the bike xD i wish mine came with one. A pal of mine said it sounds like 2 spoons rubbing together stock. That comment he made is burned in my head
I owned this bike for short while. I noticed there was excessive engine vibration past 6K RPM to a point that your hands would almost go numb. The vibes were most pronounce around 7,500 RPM. Did you noticed the same? I eventually sold it as I couldn't stand the vibrations.
Without the baffle sounds great in video. But in real life that is so loud 🙂 Even with ear plugs my ear hurt after an hour long ride, especially in the 4k-5k rpm range, there's just too much grunt.
Gunnar Carlson sorry for the late reply. Been real busy here lately. What I did was took a pair of pliers and stuck the grips into two of the little pipes, then took a screwdriver and put it between the grips and used it like a handle and twisted it off. Hope this helps, hard to put what I did into words lol.
Im debating on putting baffle back in on my 2018 cbr650f. I also have the akrapovic titanium exhaust with a k&n air filter and power commander v. Its crazy loud without baffle but there is also a drone like sound that i dont know how i feel about now.
Yes, this bike is (in my opinion) the perfect starter bike. It has a very fine balance of control, acceleration, and speed that anybody with self confidence can control.
Negative. 650 series are too powerful for a beginner.Start with a 300 or 400 series. Only the insurance alone will kill you.Run I insurance quote before buying any bike.
Hi UnaverageGamers I am planning to take out the baffle. You mentioned worsen performance after taking the baffle out right? but Is it significant? Do you notice any increase in vibration with baffle out?
Hey man, Got the same one! Any tips for getting the baffel out? I unscrewed the screw but it sits in there like a bitch. Maybe it got too hot an melted a little bit Inside? I even took the endpiece off but no chance with getting this thing out. Highly aprreciate man! Good vid!
Hey man what’s going on, so you bought the exact same one from the link you provided? I was wondering if it’s exactly the same fit cause it only shows for the fb 650 f
I’ve just fitted this to my bike a couple of days ago, but now I want to remove the DB Killer. I can’t get the Allen key in because of the position of it on the exhaust. Have you any advice? Cheers
You can try taking the exhaust off of the mounting bracket. If you look where the actual muffler is there are 4 bolts holding it to the frame, loosen those and it will drop down for you.
There's about 2mm between the two, but yeah I agree it is too close. If I wasn't so lazy I would move it up some because it does have wiggle room it's just that the shop put it on like that.
Pretty dumb actually More specifically stupidly dumb $23 for a simple old style incandescent light bulb ? Where the hell is this price ? A Honda scab dealer ,the better auto parts stores have that bulb on the shelf I'll bet & alot less than the scab dealer Mark up Gullible price.
![[PURE SOUND] INSANE CBR650F EXHAUST](http://i.ytimg.com/vi/xGJV_pjqvMg/mqdefault.jpg)
That sounds eargasmic!! Im looking to get the 2018 CB650F! Its finally coming to North America
It sound soo much better in person, very deep sounding. I was excited when I found out that they started selling these in the States, it's the perfect beginner bike.
I just bought a 2017 model about a month ago... LOVE IT
Yeah, going from my CBR500R to the 2018 model next spring.
I hate it when people say beginner bike lol a bigger bike is a 125
I have the 2014 in all black with that exhaust. About 10000 rpm it screams loud as fuck, love every second of it
I just saw one in the dealer of honda and I fall in love with the bike
That sounds amazing.
Love that sound without the baffle.
lucky you got it with the bike xD i wish mine came with one. A pal of mine said it sounds like 2 spoons rubbing together stock. That comment he made is burned in my head
So sick! This is my next bike!
The swing arm is touching the baffle the exhust it should be two inch gap between it
Exactly very stupid
I owned this bike for short while. I noticed there was excessive engine vibration past 6K RPM to a point that your hands would almost go numb. The vibes were most pronounce around 7,500 RPM. Did you noticed the same? I eventually sold it as I couldn't stand the vibrations.
Some days they are atrocious and some days I don't notice them, it definitely is a downside.
That's really disappointing to hear
I have a 2016 cbr650f. I saw people said vibrations. I notice none on mine.
Just bought a 16' 650F and it resonates a little but it's fine on the highway
I have 2018 and it definitely does it on mine too
This exhaust combo sounds better then a 600rr tbh.
Was just sitting on one at Honda so good 👌
The exhaust too close with arm
no mate when you sit on the bike the exhaust drops about 3-5 inches so there isnt a problem.
Without the baffle sounds great in video. But in real life that is so loud 🙂 Even with ear plugs my ear hurt after an hour long ride, especially in the 4k-5k rpm range, there's just too much grunt.
Holy fuck Akrapovic that shit is loud
amazing sound
86 the baffle, for sure.
You took the baffle just with a screw did I hear that right
It looks crazy close to the swingarm does it touch?
Love it. Want one on mine.
It was a tough decision but i went with the Two Brothers exhaust.
Sounds well ! That’s the last thing I need on mine !
Ngl when I get a bike I want to get this bike and do some of this stuff to my bike
With this exhaust you get real monster. Max. what you can get from this engine. It is custom made on real machine.
Still got the bike bro?
What tools did you use to take the baffle out? I’m having a hard time getting it out after I took the screw out?
Gunnar Carlson sorry for the late reply. Been real busy here lately. What I did was took a pair of pliers and stuck the grips into two of the little pipes, then took a screwdriver and put it between the grips and used it like a handle and twisted it off. Hope this helps, hard to put what I did into words lol.
convert your signals to LEDs, they use less power and are more resilient, I did on my DR and I've never had a turn signal go out again.
You have to get a power commander and get it dino tuned if you want it to have better performance with the aftermarket exhaust system
Im debating on putting baffle back in on my 2018 cbr650f. I also have the akrapovic titanium exhaust with a k&n air filter and power commander v. Its crazy loud without baffle but there is also a drone like sound that i dont know how i feel about now.
How did you take your baffle off?
@@jeromelloydsr4491 it was already removed when i bought the bikd
@@jeromelloydsr4491 it was already removed when i bought the bikd
@@jeromelloydsr4491 theres a little bolt u undo and slide baffle out
Hey mate, beautiful sound of the exhaust there , do we have to put a power commander for full system ??? Kindly replying
Kash You really should, but it will run just fine without it.
UnaverageGamers wat will be the benefit of it , or if not will it harm the engine in sometime ?
It will make your fuel/air ration better resulting in more power. As far as it harming the engine, I don't see how it would.
Have exactly the same bike and exhaust but baffle in better in than out less power lost less snappy
Is this exhaust california legal though..
Does the exhaust without the baffle make the bike increase(better) in performance or decrease(worse)
It decreases it
What was the website the buy a good used bike on ... the guy from Walmart
hi! do you think a complete beginner can handle the cbr 650 f and would you recommend it as an entry bike?
Yes, this bike is (in my opinion) the perfect starter bike. It has a very fine balance of control, acceleration, and speed that anybody with self confidence can control.
Negative. 650 series are too powerful for a beginner.Start with a 300 or 400 series. Only the insurance alone will kill you.Run I insurance quote before buying any bike.
Litto808 Speak for yourself, this was my first bike. Treat it with respect and it will be the perfect beginner bike.
Tell that to the last 2 bikers in my OR table that lost their legs. Like I said No, this is not a bike for newbys.
Litto808 I guess it's not for everyone, no offense.
Is that muffler made for the cbr650f because i see the the muffler end touch the swingarm.
It is but he made something wrong. My isnt touching it at all
what fender eliminator do you have? I really like it and own a 2015 CBR 650F
Is the exhaust meant to be resting on the swing arm?
No, I'm just lazy.
That’s a nice ass bike
Hi UnaverageGamers
I am planning to take out the baffle. You mentioned worsen performance after taking the baffle out right? but Is it significant? Do you notice any increase in vibration with baffle out?
Can you tell me how much seat can be shaved in this bike?
I am 5 foot 2 1/2 and I've had enough shaved out of the seat to ride this bike comfortably and to not need to mess around with the suspension.
@@paulkirtley1132 do you flat foot now?
Hey man,
Got the same one! Any tips for getting the baffel out? I unscrewed the screw but it sits in there like a bitch. Maybe it got too hot an melted a little bit Inside? I even took the endpiece off but no chance with getting this thing out.
Highly aprreciate man! Good vid!
Why the CBR650F did not come to South Africa I don't know 🙄
Is this bike a inline 4 or twin?
Inline 4
Hey man what’s going on, so you bought the exact same one from the link you provided? I was wondering if it’s exactly the same fit cause it only shows for the fb 650 f
I didn't buy from that link, but it is the exact model that is on my bike.
Does the exhaust touch the swing arm?
No but it is close.
I’ve just fitted this to my bike a couple of days ago, but now I want to remove the DB Killer. I can’t get the Allen key in because of the position of it on the exhaust. Have you any advice? Cheers
You can try taking the exhaust off of the mounting bracket. If you look where the actual muffler is there are 4 bolts holding it to the frame, loosen those and it will drop down for you.
Cheers. I actually just saw you reply. Once i got the allen key removed i got the DB Killer off with a set of grips and a hammer 😀
How much did it cost for full system
Depends on where you go, mine cost about $1100 after tax.
Thank you man
It's cheaper on ebay
The exhaust Too close with arm already
The exhaust tip is too close to the swing arm..does it touch during jumps?
I've never seen it touch, nor does it have any marks on it. You can move it forwards a little bit with some muscle, I'm just too lazy lol.
Why would you point the camera at your head????
My GoPro mount broke :(
It's pronounced aKRApovich.
But that's a sweet noise.
ooooh ahhhhh!
Agropavick?
Yes that is what's in the title.
You lost your snappindsess because it needs to be tuned when you change exhaust more air flow now.
Why does it sounds very similar to Benelli 600i???
One factor i doesn't like this bike because of banana seat , classic meter and slim design . but for starting bike its should be all right.
I agree, I hate my seat lol
You might as well have put the phone/camera inside the muffler. Bruh, a sound test is supposed to have some distance to give it the real test.
That exhaust is touching the swing-arm. I mean, it's not a big deal... but, yikes.
There's about 2mm between the two, but yeah I agree it is too close. If I wasn't so lazy I would move it up some because it does have wiggle room it's just that the shop put it on like that.
Word. My KTM had 1mm between the rear shock coil and exhaust. Apparently a non-issue, but felt sketch.
Pretty dumb actually More specifically stupidly dumb $23 for a simple old style incandescent light bulb ? Where the hell is this price ? A Honda scab dealer ,the better auto parts stores have that bulb on the shelf I'll bet & alot less than the scab dealer Mark up Gullible price.
Akrapovic is pronounced Akrapovich
wtf 😅