I have a questions about the permanent vinyl. I want to do some mugs, glasses, and water bottles. Is the permanent vinyl strictly hand wash only? What can I expect from it's performance? Also, I see where some iron on mugs....... how and why?
I love your video. I bought the Cricut Sticker paper and I cannot get it to kiss cut the paper! I have tried it on sticker setting, it didn’t work, I have tried it on cardstock, sticky, nothing works, I have wasted so much sticker paper. Any suggestions would be greatly appreciated. I have no problem with other sticker paper...
These stickers are amazing. Question, I am still a newbie, how did u change your materials for the 2nd sheet? The copy paper. I have not been able to figure that out. When I am doing a project and mat one is sticker paper and mat 2 is a different material, I can’t figure out how to change it. It keeps the same materials for both mats. I hope that made sense, it’s hard to explain over text 😀 thanks
RobynLovesPedro Silva click on the drop down arrow to the far right of the materials section and the section will open up again allowing you to choose a different material for mat 2.
After cutting your first mat, click on the second mat but then cancel the cut. You can then tell it to cut your second mat and it will ask you to select your material again.
Awesome video. Could you do a tutorial on how to create the lines for individual words. As if I were going to put them in my planner. Words like work, hutch, etc...... hopefully I’m making sense.
Super cool! I did not know you could do this. I have a question for you. If I stamp a bunch of stamps, all different, on a sheet of paper, scan it, save it as a JPG, upload it into design space, and then cut it, will the Cricut cut out all the different characters separately?? I don't have a scan and cut, but I have a wand scanner, so I have been experimenting with this idea.
Thank you for this tutorial. I am planning to buy the cricut maker as i want to do my own sticker. Is it possible to foil the stickers using the cricut maker itself? or you really need a foiling machine?
you need to put some plain paper over any areas of toner that arent covered in foil otherwise it will adhere to your carrier sheet (as it did in the video) and may transfer on to your future projects :)
@@TheStructuredChaos I have a laminator as well and I am so happy to hear that you use your everyday one. Do they have specific pouches that don't seal? I guess I have never looked for that before.
You put the cricut sticker paper into a laser printer?! Cricut sticker paper is for inkjet only, if you put inkjet sticker paper into a laser printer the adhesive can melt and drip onto the toner cartridge and the inside of the laser printer and destroy it.
I had not seen anything like this before. It looks so cool! Thank you for sharing 👍
Thanks for watching!
😎 You are AWESOME, 2 tutorials in 1 🙌🏻 Thank you so much!!!
Amazing Tutorial. I've been wanting to learn how to make foil stickers, you made it super easy. TFS!!!
I have a questions about the permanent vinyl. I want to do some mugs, glasses, and water bottles. Is the permanent vinyl strictly hand wash only? What can I expect from it's performance? Also, I see where some iron on mugs....... how and why?
I love your video. I bought the Cricut Sticker paper and I cannot get it to kiss cut the paper! I have tried it on sticker setting, it didn’t work, I have tried it on cardstock, sticky, nothing works, I have wasted so much sticker paper. Any suggestions would be greatly appreciated. I have no problem with other sticker paper...
Can these be done on a clear background as opposed to white background paper
Thank you so much!!! This helped a lot. I subscribed to your Chanel. So helpful.
Wow, this was super helpful! I am a newbbie to sticker making and to my new Cricut Maker, thanks so much for sharing!
And if I want to make it on a colored background means print on inject then on laser, is that possible?
Can you make the stickers with shapes ? Instead of square maybe like star ⭐️ or hearts ♥️?
How cute and fun to make. I have never seen these before, Thank you for the great video tutorial
Great video! I'm looking into buying a Cricut for sticker making and other cutting and this is very helpful. 👏🏾👍🏾🙏🏾
These stickers are amazing. Question, I am still a newbie, how did u change your materials for the 2nd sheet? The copy paper. I have not been able to figure that out. When I am doing a project and mat one is sticker paper and mat 2 is a different material, I can’t figure out how to change it. It keeps the same materials for both mats. I hope that made sense, it’s hard to explain over text 😀 thanks
RobynLovesPedro Silva click on the drop down arrow to the far right of the materials section and the section will open up again allowing you to choose a different material for mat 2.
After cutting your first mat, click on the second mat but then cancel the cut. You can then tell it to cut your second mat and it will ask you to select your material again.
I'm in the u.s and new to this machine where do you purchase the glaminator plastic heat sheets you used? When you put it over the foil
It comes with it
Can you use a normal laminator instead of a glaminator?
Yes
Awesome video. Could you do a tutorial on how to create the lines for individual words. As if I were going to put them in my planner. Words like work, hutch, etc...... hopefully I’m making sense.
Yes I can do that :)
They are easier ways to make stickers. but thanks for sharing your method.
Can you do this with clear sticker paper?
Great tutorial. Thanks for sharing. Hugs and blessings.
Outstanding tutorial. This looks like lots of fun. Thank you for the excellent start to finish tutorial. Wishing you a super week. Hugs Susan
Excellent tutorial 😍
Super cool! I did not know you could do this. I have a question for you. If I stamp a bunch of stamps, all different, on a sheet of paper, scan it, save it as a JPG, upload it into design space, and then cut it, will the Cricut cut out all the different characters separately?? I don't have a scan and cut, but I have a wand scanner, so I have been experimenting with this idea.
You need to either turn it into a png or when you upload you need to remove the background.
I love ❤️ it, never saw anything like this before! It’s cool! 😍
Excellent..Thank you
Can you use any other brand of foil for laser printers in the Xyron Glaminator?
It has to be toner reactive foil :)
Do you use a Laser Printer for this?
tfs, this was really helpful.
OH WOW at the possibilities!!
Thank you for this tutorial. I am planning to buy the cricut maker as i want to do my own sticker. Is it possible to foil the stickers using the cricut maker itself? or you really need a foiling machine?
Moon Angel the cricut is a cutting machine, it does not foil!
What’s the difference between this machine and minc?
Does the cricut have to be next to the printer? Or Does it work wireless?
Shandra Lily Wright it works wireless I use my wireless all the time
Thank you !
Amazing tutorial!
Great video!
Xyron thank you 😊
you need to put some plain paper over any areas of toner that arent covered in foil otherwise it will adhere to your carrier sheet (as it did in the video) and may transfer on to your future projects :)
Awesome tutorial .....
Omg 😮 nice
I haven't seen the Glaminator before. Oh my goodness, girl. I told my son you are one of my enablers. hahaha I mean that in a good way.
Belinda W it is basically a laminator. I just use my everyday laminator.
@@TheStructuredChaos I have a laminator as well and I am so happy to hear that you use your everyday one. Do they have specific pouches that don't seal? I guess I have never looked for that before.
Can someone tell me why a jet printer wouldn’t work?
The laser printer uses a powder toner which allows the foil to stick to it. The ink jet ink won’t work
So cute! Ty!
😍
You put the cricut sticker paper into a laser printer?! Cricut sticker paper is for inkjet only, if you put inkjet sticker paper into a laser printer the adhesive can melt and drip onto the toner cartridge and the inside of the laser printer and destroy it.