Foxwell NT301 OBD2 Code Reader FULL Review & How To Check Engine Light on your car / Clear Codes..
Вставка
- Опубліковано 13 лют 2023
- Full review of the Foxwell OBD2 Code Reader. And how to check your car.
Using the FOXWELL NT301 OBD2: a.co/d/b3cA1B6
But same idea with most basic readers out there. - Навчання та стиль
Just an FYI for Jeep/Chrysler owners: that code often times is simply the gas cap... but you may want to buy one from the dealer instead of a parts store like Autozone. I had a Wrangler, replaced the cap with one from AZ and the code came back. After a couple different tries.. I just went and bought a mopar one from a dealer and it cleared up. For some reason aftermarket gas caps don't always work
Yeah. I got the mopar one 👍
Will it show if you have a bad coil pack? Don’t you have to have the car running to show some of these codes thanks for the video. Very informative.!
Not sure about this unit. But from what I heard it should , and yes for that I think car would be running. Just never did it so can’t confirm
If my car is cranking but not starting, and I want to confirm that its not something besides the fuel pump; will one of these analyzers work if the engine is just cranking or if just the ignition is on? Thanks for any guidance.
Hard to tell . Could be many things.
What does component test do? I've watch seven videos and everybody skips thru it.
I’ll check it out and try to do follow up
How do you reset the check engine light?
It’s shown
Does this scanner access the BCM?
I believe so. But I would say check mfr specs or manual
Update what fixed the car ? Thanks
Fuel Vapor Leak Detection Pump replaced. And new gas cap
Does it works on Honda Civic of 1997 ! with 3 pins conector ! it’s EODBI
honestly not sure. woudl check mfr site for specs and compatibility.
Can it be powered using the USB if power from the cars plug doenst work?
Not this one.
GOOGLE POSSIBLE OPTIONS, THEN ,IF NECESSARY, SCAN AGAIN FOR POSSIBLE COMPONENT FAILURES ...MAKE USE OF THE SCANNER BEYOND THE BASICS UPDATE: GOOGLE IS NOT NECESSARY, THE INFO IS ON THE SCANNER; A BLUE QUESTION MARK WILL APPEAR ,CLICK ON IT , & THE POSSIBLE CAUSES WILL BE SHOWN
👍
Man, I kept hitting the blue button and thought the machine might be defective because the same screen kept popping up. Haha. Good ole operator error on my part.
👍
So Weird Tutorial - no flow...
👊
You don't know what you are talking about.
Yup 👍
BUY BLUE DRIVER. THIS THING SUCKS