Thanks! My son ordered adapters after he bought a set of wheels and tires from a 2005 f150. He has a 2002 f150 I have spent years and thousands of dollars customizing and taking care of. It’s a beautiful and simple step side. I asked if he was sure the new wheels would fit (knowing the 18” rim size would not fit on the current 16”) and he was “sure” they would- i then explained that most parts are interchangeable for 1997-2003 but not before or after… well low and behold he got home (after forgetting to bring the full sized spare on the 3 hour trip) to realize they would not fit and finding adapters has been a nightmare. He ordered a set that is the wrong size and now will cost around $50 to ship back so I’ll be in charge of the next order- however finding a set is very difficult for this truck… he originally wanted to sel after I taught him how to change out belts, tires, battery, fuel pump, fuel filter, alternator, exhaust, etc. Good video, to the point and clear. Thank you.
DAMN!! I wish I could've seen this video BEFORE I spent/wasted over $300 on stock dual wheel adapters!! It's been taking me DAYS to install my aftermarket wheels bcuz of all of the issues I'm running into such as not having the right size of lug nuts AND hack sawing my stock bolts down. Now my aftermarket wheels stick out WAY TOO FAR! Frickenay! (went from 5x114.3 to 6x127)
Hey Dick! Why does nobody make a hub-centric wheel-centric (with lip) for my 98' 4x4 dodge ram 1500 5.9 magnum..ps diameter of center hub is 77.7 so bore will need to be 77.8 and bolt pattern is 5x5.5 bolt thread and size id the only thing holding me back from purchasing the 04-09 dodge ram 1500 spacers which are 5x5.5 with a center bore of 77.8 but the studs are 9/16 instead of the 1/2 and thread count is different.
I recently purchased 4 hub centric adapters from some site recommended by a rim shop and got totally screwed they weren't made corectly I had to shave the back wheel adapter hubs to get the back ones to fit and the front ones i have to buy again smh
Really need help. Have a 2003 x5 Bmw 5 lug. I measured like you said from far side of hole,skip one and measure to center of next 43/4 , the new rims i want to put on it measures 4,1/2 ,,,the studs are part of the lug,do you make an adapters to fit that???
Very good video. I've been in the automotive business most of my life but not dealing with much on the wheels and tires at side mostly Auto Body Paint and Body and Glass work, with that said I'm rebuilding an 07 Chevy Colorado and I want to put Trailblazer Super Sport Wheels on it. The Colorado is 6x5 and 1/2 and the Trailblazer is 6x5. Do they make adapters for that because I have had a lot of trouble finding them? Thank you very much.
I need wheel hub adapters having 4 bolts made for a garden tractor's front rims having a 3 bolt pattern, anybody know which riding mower has the front rim 3 bolt pattern like maybe a Case mower, a small IH, maybe a John Deere? seeing as how the 2 riding lawnmower front rims was in great shape with almost new tires having deep treads good enough snow for $10.00 O.o, i bought them for use on a offroad Go-Cart or modify 2 hub spindles to fit to a mini bike, 1 spindle hub for front with drum or dick brake, one spindle hub having a rear sprocket combination having a true drum brake like the 70s motorcycles instead of the flimsy common band brake on go-cart rim combinations
if your wheels are 5 x 114.3 they should be close enough to work on that car without adapters, but if you want adapters we have them available, if they do not slip straight on the car double check the bolt pattern of the wheel.
Vehicle 5x127.5 to 6x139.7 wheels. Are these available without the black screws to hold together. Can they be made in a one piece instead of two? Shouldn't that make a stronger adapter?
tire kingdom birches about my 2 inc adapters saying it will mess up my car ..but no problems so far ..I have a 2003 mustang convertible with a 225 I got my current rims from a friend at work off is 09 gt they are 235 caliper clearance so adapter are needed...but mine are made for this install they even said ford authorized parts on the box ..
What exactly does tire kingdom say? I have been researching the shit out of this whole subject and 90 percent of what I've found is negative on wheel adaptation. About 1 video to every five is favorable to using these things. On all forums the general consensus is the same. Bummer for me because I've already purchased some but i will not be risking it.
Just got mine....... 2006 Toyota Tundra SR5 2WD 4.7L ...... SO MYWHEELADAPTERS .com just hooked me uppp.!!!!! With perfect precision..!!!!! 06 tundra on 6 lug 5.5 to an 2011 ToyotaTundra 4x4 (5) lug on 150MM ... I went this rout because I found a sweet deal on some 22’s with around 1000 miles on the rubber.... for $350.SO thanks to mywheeladapters.com ......
@@shawncordeiro1150 I bought my Duramax with the wheel spacers on them already. The guy that had the truck before me got the wrong wheels so got the spacers to make them work. I reached out to the company that made my spacers (Set Group USA) and they say that with my aftermarket wheels I won't have any issues or restrictions. However, they also said if I was using stock Ford wheels to put on my Chevy with these spacers that I would not be fine. They said I would be fine with my aftermarket BMF wheels but I'm still kinda skeptical. I've searched all over and nobody really seems to talk about towing with wheel adapters.
Thanks! My son ordered adapters after he bought a set of wheels and tires from a 2005 f150. He has a 2002 f150 I have spent years and thousands of dollars customizing and taking care of. It’s a beautiful and simple step side. I asked if he was sure the new wheels would fit (knowing the 18” rim size would not fit on the current 16”) and he was “sure” they would- i then explained that most parts are interchangeable for 1997-2003 but not before or after… well low and behold he got home (after forgetting to bring the full sized spare on the 3 hour trip) to realize they would not fit and finding adapters has been a nightmare. He ordered a set that is the wrong size and now will cost around $50 to ship back so I’ll be in charge of the next order- however finding a set is very difficult for this truck… he originally wanted to sel after I taught him how to change out belts, tires, battery, fuel pump, fuel filter, alternator, exhaust, etc. Good video, to the point and clear. Thank you.
is it weird to fall asleep to this video multiple times
not that i have, but like if you did would that be weird
Great video. Got alot of info I didnt know. Will be getting a set of adapters for my GEO TRACKER
Best video on wheel spacers and I have seen a ton of videos! Thanks!
Need help!!!! I have a 1997 chevy truck with 5x5 lug pattern. I have wheels that have a 5x4.5 pattern. Need help finding an adapters
DAMN!! I wish I could've seen this video BEFORE I spent/wasted over $300 on stock dual wheel adapters!! It's been taking me DAYS to install my aftermarket wheels bcuz of all of the issues I'm running into such as not having the right size of lug nuts AND hack sawing my stock bolts down. Now my aftermarket wheels stick out WAY TOO FAR! Frickenay! (went from 5x114.3 to 6x127)
2008 3/4 ton chev will 1 1/2 hub centric aluminum work for rear of my truck towing 8000lbs ?
I have 2002 F150, 5x5 stud & I am installing a wheel with 5x5.5 stud. just bought an adapter. is there anything else I will need?
Or when the preferred wheel manufacturer doesn't make a specific wheel to suit your car.
Hey Dick! Why does nobody make a hub-centric wheel-centric (with lip) for my 98' 4x4 dodge ram 1500 5.9 magnum..ps diameter of center hub is 77.7 so bore will need to be 77.8 and bolt pattern is 5x5.5 bolt thread and size id the only thing holding me back from purchasing the 04-09 dodge ram 1500 spacers which are 5x5.5 with a center bore of 77.8 but the studs are 9/16 instead of the 1/2 and thread count is different.
I'm waiting to put 2010 powerstroke rims on my 92 d250 please help
Do you make a wheel adapter that would fit on my 6x139.7 with a 106mm bore to fit a rim that is 6x114.3 with a 78mm bore?
I recently purchased 4 hub centric adapters from some site recommended by a rim shop and got totally screwed they weren't made corectly I had to shave the back wheel adapter hubs to get the back ones to fit and the front ones i have to buy again smh
Hi I have rims for a 1996 Vitara or in USA sidekick that I want to fit to a 2006 Vitara
Really need help. Have a 2003 x5 Bmw 5 lug. I measured like you said from far side of hole,skip one and measure to center of next 43/4 , the new rims i want to put on it measures 4,1/2 ,,,the studs are part of the lug,do you make an adapters to fit that???
Very good video. I've been in the automotive business most of my life but not dealing with much on the wheels and tires at side mostly Auto Body Paint and Body and Glass work, with that said I'm rebuilding an 07 Chevy Colorado and I want to put Trailblazer Super Sport Wheels on it. The Colorado is 6x5 and 1/2 and the Trailblazer is 6x5. Do they make adapters for that because I have had a lot of trouble finding them? Thank you very much.
Would you sell a wheel adapter for a 1985 Buick Regal? From 5 lug too a 4 lug??
good video thanks
cus I have my rims of a chevy 2007 but I got a dodge ram big horn edition 2007 how much for the adapters ????
Anyone know where i can find hubcentric wheel adapters 5x4.75 to 5x114.3 70.3 bore
i got a civic 95 2dr coupe 4x100 i believe , but i want to install mazda rx-8 2004 wheels on it . do you make the adapter and price
What type of adapter would i need to use on my 97 ford expedition to convert it to 6 lug so i can use my 2016 expedition rims on it ?
5x135 to 6x135 but if it is a factory wheel you may need the adapter to be wheel centric and you would need the factory lug nuts to match the wheel
I need wheel hub adapters having 4 bolts made for a garden tractor's front rims having a 3 bolt pattern, anybody know which riding mower has the front rim 3 bolt pattern like maybe a Case mower, a small IH, maybe a John Deere? seeing as how the 2 riding lawnmower front rims was in great shape with almost new tires having deep treads good enough snow for $10.00 O.o, i bought them for use on a offroad Go-Cart or modify 2 hub spindles to fit to a mini bike, 1 spindle hub for front with drum or dick brake, one spindle hub having a rear sprocket combination having a true drum brake like the 70s motorcycles instead of the flimsy common band brake on go-cart rim combinations
Does MyWheelAdapters have any 5x4.5(5x114.3) to 5x4.5(5x114.3) 1/2x20 studs with 71.5 bore diameter 1inch wheel spacers?
+patrick lang sorry I missed this question, but yes we do, US-made $149 for a set of four
I have chevy big bolt wanna put small bolt on the car
Are you still selling adapters?
I have a Bmw n it uses lug bolts cuz there r no studs coming off the hub. Can those be used with adapters or spacers and be safe? Need help plz
BIG C me too, did you try it out, how do BMW studs work with adapters?
Hi there I have a Grand am SE 2000 and I have rims 18" 5x114 bolts I just want to buy adaptor fit to my car and my rims...
if your wheels are 5 x 114.3 they should be close enough to work on that car without adapters, but if you want adapters we have them available, if they do not slip straight on the car double check the bolt pattern of the wheel.
I'll check already my wheels almost taught in the shock...I try just only rim no tire yet..
Do you carry 5x4.75 to 5x4.5
Will your wheel stick out sir ?
How about 4x114.3 to 5x114.3?
Bryan Cedeno eBay has real cheap ones, same quality as far as I can tell
I am looking for wheel adapters I have a 2002 Audi TT Quattro 1.8t 225hp the wheels I want to put on it come off a 2010 Audi A5
You shouldn't need adapters, both the tt and A5 are 5x112
The lug pattern don’t line up the a5 rim is a little bigger
My car has 5x114.3 and the rims i have are 5x120 what kind of adapters do you recomend me ?
Literally what i need
Vehicle 5x127.5 to 6x139.7 wheels. Are these available without the black screws to hold together. Can they be made in a one piece instead of two? Shouldn't that make a stronger adapter?
thanks for the info.
What about my 5x114 and I want to put 5x120 wheels Corvette rims for my infinity g35 and price
Sorry for the delay, we can do a set of four 1 inch thick US-made wheel adapters for $149.97 delivered in the US plus tax if you're in California
Hi Richard. Do you recommend putting anti seize between the vehicle hub and the adapter?
+oohlio always just made sure had good clean flat surfaces, I never used anti-seize but it may be different in the northern environment.
+Richard Lynch I need 6 lug adapters for my 84 caprice rims came off a tahoe
How about 4x100 to 5x114.3? Any price info?
$299.97 for a set of four US-made delivered in the US
Need a 6x5.5 to 5x5.5 ...1 inch thick
Donde puedo hayar espeuncer para rines 20 para Mercury del 2000
Mannil looking for hubcentric spacers how I get in contact with u, going from 14 to 18 same bolt pattern but want them to fit snug
Royrockbrain k
I need wheels adapters
His voice makes me wanna sleep
😆
tire kingdom birches about my 2 inc adapters saying it will mess up my car ..but no problems so far ..I have a 2003 mustang convertible with a 225 I got my current rims from a friend at work off is 09 gt they are 235 caliper clearance so adapter are needed...but mine are made for this install they even said ford authorized parts on the box ..
mine are like the upper left .so rim could rest on hub if needed ...
What exactly does tire kingdom say? I have been researching the shit out of this whole subject and 90 percent of what I've found is negative on wheel adaptation. About 1 video to every five is favorable to using these things. On all forums the general consensus is the same. Bummer for me because I've already purchased some but i will not be risking it.
Nice video pal.
how can I get in touch with you? ?
Just got mine....... 2006 Toyota Tundra SR5 2WD 4.7L ...... SO MYWHEELADAPTERS .com just hooked me uppp.!!!!! With perfect precision..!!!!! 06 tundra on 6 lug 5.5 to an 2011 ToyotaTundra 4x4 (5) lug on 150MM ...
I went this rout because I found a sweet deal on some 22’s with around 1000 miles on the rubber.... for $350.SO thanks to mywheeladapters.com ......
Red loctite on your spacers is your friend. Safety 1st!!!
Good spesar
Is it safe to tow using these?
Depends, what are you towing in weight? What is the tow vehicle?
@@WheelAdapterSpacers 02 Duramax. Rated 12k bumper pull, 16k 5th wheel
@@MichaelLeeHensel good question id like to know also
@@shawncordeiro1150 I bought my Duramax with the wheel spacers on them already. The guy that had the truck before me got the wrong wheels so got the spacers to make them work. I reached out to the company that made my spacers (Set Group USA) and they say that with my aftermarket wheels I won't have any issues or restrictions. However, they also said if I was using stock Ford wheels to put on my Chevy with these spacers that I would not be fine.
They said I would be fine with my aftermarket BMF wheels but I'm still kinda skeptical. I've searched all over and nobody really seems to talk about towing with wheel adapters.
@@MichaelLeeHensel I wonder why they wont work on ford wheels Ford purposely enginers there stuff so a person must go to a ford dealer
How to properly shorten/cut down stock bolts: ua-cam.com/video/RW4Gg08GGFw/v-deo.html
how much for 3ich
+Cory Shelp 3 inches thick are about $75 each probably depends on the bolt pattern.
Most have short attention spans lol
This dude talks like my old physics teacher, slow, steady, paused, slow, mono toned, BORING, YAWWWWWN, mmm k
Never run adapters
Do you have a 5x112 to 5x114.3 adapter?