I would love to see something persona themed, but I can't think of any specific item from persona that stands out. Another good idea I though of would be a NES Dock where the switch goes in like a cartridge. or a SNES one where it slots like the Cart on top
Looks awesome! I would definitely recommend switching over to PETG sometime - it sands so much much quicker and much more nicely than PLA and it’s so strong as-well!
@@make432 No need! PETG is just as easy to print as PLA and doesnt require and enclosure at all - it doesnt need ambient heat, nor does it release fumes - its like the best parts of PLA and ABS mixed together!
We used settings from 3D printed Tabletop www.3dprintedtabletop.com/resources/3d-printing-profiles/ (Cura) Siepie CR10/Ender 3 - Small Minis PLA Base 1.0 - this one specifically, just making tweaks for our Prusa
Hello! So I am considering making this. I will be printing in resin. There are complaints of the counter being too big. In your experience, would scaling down the print be viable because of the tighter tolerances?
I think scaling the entire print down should be fine - the tolerances are pretty large so there is some room for scaling. However, the internal mechanism requires the material to be able to flex, which is fine for PLA (and other FDM plastics) the resin however might shatter - so I would recommend testing the material before committing to the full print. Best of Luck!
@@make432 Ah ok great, thats the kind of advice I need. I assume the part that needs some wiggle is the circle that looks a little like a hurricane? I guess with casting I can use a different pouring resin for the mechanism, but still resin print everything to begin with. Maybe I will just do a tolerance test to start. Sounds like an adventure.
Just spitballing here but maybe- - Dope Merch -iron man helmet and/or ark reactor -boba fett helmet -lightsabers (personalized by u guys, not based off any pre existing ones) -tf2 spy’s balisong -Simon “Ghost” Riley’s mask modern warfare 2019 -Bttf delorean model (maybe use magnets to make it hover over a stand) a similar idea can possibly be done with a T.A.R.D.I.S. instead -rocketeer jet pack and/ or helmet -Wolverine claws -I thought of an interesting way to make a Thor’s hammer that will come back to you. Using a pull string, light materials, and magnets; but in all actuality it would probably be a little bulky, so scratch the whole coming back to you thing and just make the hammer -joker card (a pretty simple one, but can be pared in a video with another joker prop or a Batman or Harley Quinn prop) -Harley Quinn mallet -mecha Godzilla head on a mantle or something (might be a little funny) or just have looking like it was forcibly ripped off by Godzilla -iron giant head or model of the full body -one of fin’s (from adventure time) swords -Ash’s (from The evil dead franchise) chainsaw arm and boom stick I think I’ve gone a little to far with the list, you where probably just expecting one suggestion lol, most of these I just thought up while writing this comment, some where projects I was thinking about doin but not enough spare time to do them. Anyways if you have read this far I love the content and all the projects you do! Have a nice day
😮 * copies list * Thank you so much for the ideas, we love to hear them. We have already thought about some of these and we'll note the others as potentials! Thanks for your support!
New video every other week, subscribe to catch our upcoming builds! What would you like to see us make?
I would love to see something persona themed, but I can't think of any specific item from persona that stands out.
Another good idea I though of would be a NES Dock where the switch goes in like a cartridge. or a SNES one where it slots like the Cart on top
@@ViewtifulCombo Ooh Joker's mask could be a good one! Custom docks would be sweet as well!
Your channel is going to blow up soon, the production quality is higher than a lot of youtubers I see even right at a million subs.
💥💥💥 Thanks, we really appreciate it!
Looks awesome! I would definitely recommend switching over to PETG sometime - it sands so much much quicker and much more nicely than PLA and it’s so strong as-well!
Thank you for the tip! It is on our radar, we'll be working on an enclosure for the printer to use PETG in the future!
@@make432 No need! PETG is just as easy to print as PLA and doesnt require and enclosure at all - it doesnt need ambient heat, nor does it release fumes - its like the best parts of PLA and ABS mixed together!
Ahh I think we were thinking of ABS, thanks for the advice, we'll look into it!
hey can i check what support settings you used? Excellent model!
We used settings from 3D printed Tabletop
www.3dprintedtabletop.com/resources/3d-printing-profiles/
(Cura) Siepie CR10/Ender 3 - Small Minis PLA Base 1.0 - this one specifically, just making tweaks for our Prusa
@@make432 Thank you! Do you mind sharing the 3MF file with the Prusa settings?
Awesome work. I see. These on Etsy before
Thanks! There are quite a few people selling prints it is a really cool design!
Hello! So I am considering making this. I will be printing in resin. There are complaints of the counter being too big. In your experience, would scaling down the print be viable because of the tighter tolerances?
I think scaling the entire print down should be fine - the tolerances are pretty large so there is some room for scaling. However, the internal mechanism requires the material to be able to flex, which is fine for PLA (and other FDM plastics) the resin however might shatter - so I would recommend testing the material before committing to the full print. Best of Luck!
@@make432 Ah ok great, thats the kind of advice I need. I assume the part that needs some wiggle is the circle that looks a little like a hurricane? I guess with casting I can use a different pouring resin for the mechanism, but still resin print everything to begin with. Maybe I will just do a tolerance test to start. Sounds like an adventure.
so cool !
Thanks!
How long did this take to print
We ended up printing this on very low layer height to retain the detail. It was about 12-16 hours total
Just spitballing here but maybe-
- Dope Merch
-iron man helmet and/or ark reactor
-boba fett helmet
-lightsabers (personalized by u guys, not based off any pre existing ones)
-tf2 spy’s balisong
-Simon “Ghost” Riley’s mask modern warfare 2019
-Bttf delorean model (maybe use magnets to make it hover over a stand) a similar idea can possibly be done with a T.A.R.D.I.S. instead
-rocketeer jet pack and/ or helmet
-Wolverine claws
-I thought of an interesting way to make a Thor’s hammer that will come back to you. Using a pull string, light materials, and magnets; but in all actuality it would probably be a little bulky, so scratch the whole coming back to you thing and just make the hammer
-joker card (a pretty simple one, but can be pared in a video with another joker prop or a Batman or Harley Quinn prop)
-Harley Quinn mallet
-mecha Godzilla head on a mantle or something (might be a little funny) or just have looking like it was forcibly ripped off by Godzilla
-iron giant head or model of the full body
-one of fin’s (from adventure time) swords
-Ash’s (from The evil dead franchise) chainsaw arm and boom stick
I think I’ve gone a little to far with the list, you where probably just expecting one suggestion lol, most of these I just thought up while writing this comment, some where projects I was thinking about doin but not enough spare time to do them. Anyways if you have read this far I love the content and all the projects you do! Have a nice day
😮 * copies list * Thank you so much for the ideas, we love to hear them. We have already thought about some of these and we'll note the others as potentials! Thanks for your support!