Well Thank you sir ! I think I will test this on my TTO2 ! hopefully all the foam and mudguard will help keeping the inside clean when I'll throw it into garden grass action ^^
Hey I have the same body, wheels and those pirelli tyres on a tb01 chassis and I made the inner mudguards like you have! Great minds think alike👍 your body mount idea is great, why didn't I think of that🤔
Looks nice but what I'm wondering is, once you made the bodywork (foam etc.) will it fit all bodies? or will you need to custom make a new one every time you want to put on a diffrent body?
usually I custom make the foaming for one body，so the chassis and body basically pair permanently. if compatibility of different bodies is needed，then you can try decreasing the EVA thickness of the chassis while increasing those of the body，should work in this way
Very effective solution. This also should eliminate the annoying plastic rattle on traditional body fitments. I love the Xsara. I’m currently assembling mine and I wonder where did you source the gorgeous lights cups? Cheers!
Exactly, this modification‘s only purpose is to protect the car body from some bold handling and free of damage（to some certain degree）. A side benefit is it also reduces the shaking of the car body and looks more “scale”. In terms of “performance” improvement it‘s not relevant.😊
Can you tell me, what is the difference between this rally and touring car? I thought rally has to get bigger clearance. But it seems to be the same as the touring. So what the difference?
Basically they are identical when static，but Rally tuning would allow more extend travel，can be seen when they jump，when back to normal status they really looks almost the same. Furthermore，rally clearance is tunable to match track conditions，the travel and clearance both depends on the tracks. Hope it helps for you！
Great job! That car will be well protected.
This is the first time I've seen a Rally-spec TA05. Great DIY!
One following video would soon be uploaded，demonstrating its maneuverability，pls. stay tuned😄🤝
@@陈雁-s3g
I'm looking forward to it!
The suspension on all the machines works great!
素晴らしい！そして、美しい☆彡
I wish I had seen this 13 Tamiya kits ago. Will try on my next kit
really impressive for super strong RC rally car body nice video
Well Thank you sir ! I think I will test this on my TTO2 ! hopefully all the foam and mudguard will help keeping the inside clean when I'll throw it into garden grass action ^^
This give me some ideas even for others rc I have. Thanks for idea 💡
Very good sharing..thanks..
Gran bel lavoro ... molto utile...bel video... complimenti... ciao dall'Italia
Great tutorial! I am going to try this method out on my next car. Thank you for posting this.
I'm glad I could help you😊
Amaizing Good Works!!
So clean. Awesome thanks for sharing!
🍻🤝😊
Amazing! Stunning!
U do an excellent job no matter the lighting, bodies and firming. Pound of u and keep going.
Thank you！
Really good video. Wondered when the meat cleaver would come out👍
Top super conseil 👌
That is beautiful work! ❤
Really like this and great job!
Thanks！🍻
Great video, thank you
Just perfect! The car now weights 7 kilos but remains perfect!
Great video. I had the thoughts on this 🤔... I need more foam now. 🚀 Thanks
🤝🤝😊
Really nice work, I have a couple TA05 chassis and I'd love to convert one for rally
Hey I have the same body, wheels and those pirelli tyres on a tb01 chassis and I made the inner mudguards like you have! Great minds think alike👍 your body mount idea is great, why didn't I think of that🤔
Keep it up bro，just have a try and cheers！🍻
Such a simple idea but totally transforms!!!
Subscribed too! Love the videos!
I will try this on a car! 😃
Your support is the biggest motivation for more tests😊🤝
@@陈雁-s3g no problem! Same reason for me when others like what I do! BEST feeling ☺️
Great tip. Thanks for sharing.
That is actually pretty good idea 💡 👌 👍
Excellent work.
👍👍👍👍👍‼️
You cut the chassis for suspension stroke, but why not round the corners to prevent cracks?
looks so fun!
Great work 😊👍👍👍
This is excellent.
Nicely done
COOL. Nice work.
Hello good job 👍👍
Love this build epic job sir , why springs and shocks are you running ?
Great idea , nice car
Looks nice but what I'm wondering is, once you made the bodywork (foam etc.) will it fit all bodies? or will you need to custom make a new one every time you want to put on a diffrent body?
usually I custom make the foaming for one body，so the chassis and body basically pair permanently. if compatibility of different bodies is needed，then you can try decreasing the EVA thickness of the chassis while increasing those of the body，should work in this way
Spettacolare...bel video.... molto utile... ciao dall'Italia
ciao amigo，grazie 1000！🍻😄
謝謝您，我也正在進行改拉力的計畫，看了您的影片受益良多
😊🤝我会持续更新，谢谢关注
@@陈雁-s3g 擋泥板也做的很好，請問有販售嗎？
@@nekomimi1023 有的，我找人定制的，他已经在闲鱼上架了
This goes beyond body mount and moves into the armor category. Nice.
How much was the weight change?
Haven't got specifically gram record，simply coz weighing by hand it‘s minor，using 38 degree hardness EVA in this case.
Very nice
Nice tip. Tamiya ps color or general spray paint.? It hold the velcro tight.
Fabuloso 👍💪👍👍👍👍👍
Very effective solution. This also should eliminate the annoying plastic rattle on traditional body fitments. I love the Xsara. I’m currently assembling mine and I wonder where did you source the gorgeous lights cups? Cheers!
it‘s made by a hobbyist and sold online in China，but not sure if they were sold abroad.
What shocks absorber you had used?
brilliant 😀👍👍
Very nice , Problem is where to find that form.
Didnt quite get it，what does “that form” mean？
super!!
Mint 👍
buen video gran trabajo como siempre de redacción.
con respecto al coche no lo veo lógico. muy pesado y con prestaciones normales para un eléctrico.
Exactly, this modification‘s only purpose is to protect the car body from some bold handling and free of damage（to some certain degree）. A side benefit is it also reduces the shaking of the car body and looks more “scale”. In terms of “performance” improvement it‘s not relevant.😊
Thanks for the video.
Ta05?!? When i use my ta05 outside the belts get destroyed! How are you not destroying belts?!? Great idea with foam
when it comes to belts，the only thing can do is to avoid getting into sandy/rocky terrains.😅
Will try this on old df03ra chassis with subaru body. Will let u know result
Look forword to the progress of your project，cheers！
Where do you buy inner fender?
Did you make ur own dust cover? Where do you get it or can you please make a tutorial video?
It‘s made by a hobbyist and sold online in China，but not sure if they were sold abroad.
@@陈雁-s3g Can you tell me the name of the hobbyist? or is there a link
@@Oscar-dy1xi 【闲鱼】m.tb.cn/h.Ul1WYx3?tk=o0lmdgTnYiZ CZ3457 「快来捡漏【田宫tb05tamiya 1：10拉力平跑挡泥板】」
点击链接直接打开
@@陈雁-s3g Thx
您好，我參考了您的範本，製作了一台自己的車，但我遇到一些問題想請教，用了大量的泡綿補強車身後，我的總車重來到了1660公克左右，車子變很沈穩，很耐碰撞，車高設定到抬高的極限，離地1.8公分。
但遇到小跳台變成難漂亮的飛起來，都是穩穩黏在地上越過障礙（太重？），無法做出您另一部影片Peugeot 306那樣的華麗飛跳高度。
如果用更快的速度去嘗試飛越時，車子往往就會出現您片頭的姿態，就是飛跳常常變前滾翻。
我自行目前猜想，是不是越過跳台時，車頭底盤撞擊到跳台地面，才導致飛越姿態變成前滾翻呢？有關跑拉力，避震器的設定感覺也是很有學問呢
建议你试试行走时候先不要全速前进，在跳起瞬间再给到全部油门，这样车子飞跳的时候应该能达到你想要的效果😊
我总车重量一般都在1700～1900克，重量不是问题
@@陈雁-s3g 謝謝指教
Nice! how much extra weight did that add?
?
It’s foam
Thank you for sharing
link to the 3d printed wheel arches please?
They have dropped the product link days ago！
Where did you get the wheel wells?
3d printing
Can you tell me, what is the difference between this rally and touring car? I thought rally has to get bigger clearance. But it seems to be the same as the touring. So what the difference?
Basically they are identical when static，but Rally tuning would allow more extend travel，can be seen when they jump，when back to normal status they really looks almost the same. Furthermore，rally clearance is tunable to match track conditions，the travel and clearance both depends on the tracks. Hope it helps for you！
@@陈雁-s3g Thank you, I got how it works!
TA05!皮帶不怕灰塵砂石嗎？
Отличная доработка!!! Что за шасси?
tamiya ta05
您好，我參考了您的範本，製作了一台自己的車，但我遇到一些問題想請教，用了大量的泡綿補強車身後，我的總車重來到了1660公克左右，車子變很沈穩，很耐碰撞，車高設定到抬高的極限，離地1.8公分。
但遇到小跳台變成難漂亮的飛起來，都是穩穩黏在地上越過障礙（太重？），無法做出您另一部影片Peugeo 306的高度
另外我的飛跳姿態，常常跟您片頭一樣，都是前滾翻的狀況，請問這要如何改善呢？
直接上菜刀了哈哈哈哈（话说TA05拿来拉力的真的好少…）。挡泥板是3D打印的吗？
如果真的是拉土路小石子多还是不合适的，皮带外露，塑料齿轮。是打印的…
@@陈雁-s3g 拉力果然还是传动轴比较可靠。越说越想入XV02（
@@pheasant139 必须0102双修😂
Salut my friend super car super video subscribe subscribe .
What foam btw?
eva
is that a modified tamiya ta05?
Yes
Yes!
@@陈雁-s3g nice! I have one. great video. gives me ideas. I like the mud guards you made for the wheel wells. are they 3d printed?
@@dastreetspart3370 Yes，3d printed tpu
@@陈雁-s3g do you have the 3d print files you can share?
会不会影响散热
多少有点…不过搞成这样也不是为了跑极速了啊，问题不大的。我1060+19t540 ，这么多台车目前还没出现过热的情况。
We have to exchange taobao shopping lists :-)
恭喜发财!
すごい
牛逼大了
🫵✊🔥🔥
Stop bashing those bodies! They are not available anymore haha
I think the spirit of RC is to keep them running in good condition as long as possible，in a cautious way is needed！😂