The internal pvc cutter could really save you big time but I know from experience you have to be very sure to only cut the old section out and none of the connecting pipe or it won't seal at all.
these are all beginner grade tools for the most part. Most of them are novelty and would never survive a work environment. There's no tool that can replace experience and skills. There are some that could be helpful in the right situations though. It all depends on your experience level in what area. I am licensed in each of the trades but can see some of the gardening tools being useful in the right circumstances for instance. I doubt that any of the models show are long lasting though. There's a lot of misleading parts in these videos. I know this from using similar tools and know what is possible and what isn't. The mortar/tile cutter gives you the impression that it can make deep cuts in one pass for example. They carefully conceal that numerous other cuts have already been made and what we are watching is a finish cut.
I don't know much about cars (I've only recently started to do more...like inner&outer tie rods), but if the rotors are getting to that point with a large lip, isn't that basically when you should be replacing them?
Nice to see the tool, but useless without narration. What is the tool? What is the tool doing to make it useful? I just hear crappy music, no narration of useful information.
Yeah but, whn u have GREAT tools tht ASSIST u in ur creativity the sky is NO limit, u CAN go above & beyond, save time, save energy & create things tht may have been impossible prior 2 obtaining BETTER tools 4 the job!!
No on the tape measure because I believe among tradesmen, knowing the measurements and reading accurately has more to do with competence than convenience..
You must advance your mind as well in order to be able to understand. It is for hobbyists, iron workers in the dark or night setting, pipe fitters.. etc. Tech is unlimited possibilities. Take your macho thinking and flush it cause you are stating a very short-sighted point of view. A point of view that does survive in this setting anymore.
These videos are for people without any experience or skills that don't know any better. There are a few useful items but they're almost all low quality brands that will fail shortly after purchasing them. There's no short cut to experience and skills.
Меєте інструмент,поміряйте ті пальці того якогось збоченця (з такого якогось угруповання українопольське терористичне хакерством злодійське) що в xttt w żółtym wbrane kobieta kruk nasylstwo ---TO jeszcze popierały slużby , а дехто думав що то я
Because stirring a cup of tea is too much work
Some of theses invention have been out for years such as the bricky and the paint roller I can name much more
They sucked then and still do too
The internal pvc cutter could really save you big time but I know from experience you have to be very sure to only cut the old section out and none of the connecting pipe or it won't seal at all.
and its been around for a decade ...rich t from this old house showed one off years ago
EVERY tool & gadget in THIS video was AWESOME!!
ingenious is a stretch when you're showing us vacuum cleaners, dude. 🙂
I've seen many videos on this topic, but your approach is refreshingly unique
The form a funnel is very nice I used pieces of aluminum roof flashing for years then I saw these and bought some great investment
Bricklaying tool what if the wall is running out of level and how do you keep it plumb ?
these are all beginner grade tools for the most part. Most of them are novelty and would never survive a work environment. There's no tool that can replace experience and skills. There are some that could be helpful in the right situations though. It all depends on your experience level in what area. I am licensed in each of the trades but can see some of the gardening tools being useful in the right circumstances for instance. I doubt that any of the models show are long lasting though. There's a lot of misleading parts in these videos. I know this from using similar tools and know what is possible and what isn't. The mortar/tile cutter gives you the impression that it can make deep cuts in one pass for example. They carefully conceal that numerous other cuts have already been made and what we are watching is a finish cut.
These background songs are always bangers
1:47- Do want!
I don't know much about cars (I've only recently started to do more...like inner&outer tie rods), but if the rotors are getting to that point with a large lip, isn't that basically when you should be replacing them?
Nice to see the tool, but useless without narration. What is the tool? What is the tool doing to make it useful? I just hear crappy music, no narration of useful information.
LOL. It's funny to watch those tools. 😆😆😆
Nice
Культиватор на 5:15 был у нас еще в начале 80-х годов)))
a lot of these seem extremly pointless
Form a funnel fuck I'd use that everyday
Love the innovation
Innovation is the metric System. 😜😜😜👍🇩🇪
3:42, $100.00 for an ice scrapper is a little steep.
There is no substitute for craftsmanship .
Yeah but, whn u have GREAT tools tht ASSIST u in ur creativity the sky is NO limit, u CAN go above & beyond, save time, save energy & create things tht may have been impossible prior 2 obtaining BETTER tools 4 the job!!
too fast for me
Hello were may I buy that's tape? Thanks
Hello bro
ЗДАРОВА братан
IDK the tool for laying brick is just dumb lol if you are even ok at your job that is a very easy thing to do.
No on the tape measure because I believe among tradesmen, knowing the measurements and reading accurately has more to do with competence than convenience..
Amen sir.
Showed this to my hubby, n he said the same, James Austin x
You must advance your mind as well in order to be able to understand. It is for hobbyists, iron workers in the dark or night setting, pipe fitters.. etc. Tech is unlimited possibilities. Take your macho thinking and flush it cause you are stating a very short-sighted point of view. A point of view that does survive in this setting anymore.
Just because something is easier, doesn’t make it worse. You’d be hard pressed to find a professional draftsman that doesn’t use digital calipers.
Why don’t you narrate the info? Text is impossible to read
Onde encontro essa trena
Де можна придбати таку рулетку?
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Как правильно называется рулетка с цифровым дисплеем? Подскажите пожалуйста.
Reekon T1 Tomahawk
6:03 did you really just show a ball joint splitter. These videos are absolute junk
These videos are for people without any experience or skills that don't know any better. There are a few useful items but they're almost all low quality brands that will fail shortly after purchasing them. There's no short cut to experience and skills.
Amazing tools, just what you need
No. Your confused.
👍👍👍👍👍👍👍
As usual too bloody fast.I give up.won’t watch again.😖😊
But where to buy?
Really?
China man. China!!!
Дорогой ненужный девайс
Меєте інструмент,поміряйте ті пальці того якогось збоченця (з такого якогось угруповання українопольське терористичне хакерством злодійське) що в xttt w żółtym wbrane kobieta kruk nasylstwo ---TO jeszcze popierały slużby , а дехто думав що то я
Во это и есть 21 век.
👍…
Te de 4
And 2nd like
1st comment
7th view
Plz heart plz
What?
O
1980s porn music
where to buy it
😎
Donde consigo la cortadora de muros?