Hey dude just wanted to thank you for being so nice to me and my brother at the gas station. We are both big fans and you have definitely taught me a lot through your videos. Car audio is my passion and I'm hoping one day I'll be able to do a big build like yours. Anyways you are a huge inspiration for me and I hope I'll be able to get a demo at some point. Keep doing what you're doing man. Also I'll be 18 in march and I'm hoping I'll be able to come to you for my tattoo:)
"If you get to a point where you're not learning anymore in the hobby you might as well quit." Damn right. I'm learning with all of you guys in the bass community on UA-cam with every video. Thank you for the videos brother 👍 Keep it loud out there everyone 🔊🔊
Procrastination my biggest enemy. Got a half wall in my truck box just sitting there wire hasn't been ran since I pulled it out. Been sanding truck for paint. Haven't touched in 3 weeks
Gotta put a roll on top of that port ! .and angle a board in back of the box ,,up top ,,behind the port .. Will push it forward alot better! . Hope this helps . Good luck!
speaking of learning im soon to redesign my box based off some of your recommendations mostly because they make sense and my build is wrong right now cant you point me in the right direction on which videos you spill details
@@JerryAintloud You guys sure do. Didn’t mean to not incorporate you as you and his knowledge and wherewithal you all are sure to get positive results 👍🏾👍🏾
I didn't have good luck with one of my recones for my DS18 exl-xx12.4dhe. Other than that they are AMAZING subwoofers. The coils were fine after they blew. The soft parts are a different story. I guess that's what I get for playing 15hz on a 11k watt amplifier. 🤷🏽♂️
Love your videos sir. U make me go do upgrades on my system every time. My question is if you use diodes on an alternator to up voltage why get a higher output one
because you need amperage to maintain the voltage so when you ask the alternator to produce more voltage itll supply the same amperage but at the higher voltage only
Voltage is just voltage but amperage is how much current the alternator puts out. It’s the difference of filling a swimming pool with a straw vs. a fire hose
Last time I had the fitmenr problem I took a drill with a wire wheel around the hole until it just barely slides in, low speed, go around the hole like 3 times at medium speed then check the fit But I don’t have a router
Put hyanka in the doors they got oro level 6.5 and 2 way 6.5 and 3 way 6 by 9s that take 200 watts a d they will send for free if u mame a video about it.
@@1904audiohe tried me like that. I posted about it in every Facebook group I could find one morning before work. He called me and cashapped me my $ before 9am
@@debbie_aintloud lol last time I checked, that is indeed correct. I was looking to get a port from B.A.P but if I could save a lil that would be nice.. I live in VA so I could pick it up if necessary or I’m willing to pay for shipping..
I just checked and myrtle beach is actually a 5 hour drive from me, after gas there and back the trip would actually cost more then a new one, would you do $90 shipped? That should be more or less enough to cover shipping thru FEDEX or UPS
I think ds18 hate is not really justified, imo its from there budget line, there higher end stuff is really nice high performing gear but there budget entry level stuff has no rhyme or reason, im not saying its bad gear per se its just they obviously just pick n choose what the vendor has available and slap there name on it, its quite common in budget car audio products, then with there high end they obviously have imput on the design there not going to sell a turd as a flagship products and there high end is as solid as anything out there. They gotta keep the lights on and its hard only selling $1000 subs especially when the economy sucks. Thats why jacob started selling the E & LCS line there affordable and sell fast quick money, even aup n comming Jacob fanboy on a really tight budget can have that coveted genuine Sundown dust cap....could save some money n buy a sundown dust cap n some e6000 glue off ebay n slap it on that $30 Jensen sub from wally world lol. Theres a reason BOSS Group is the largest most successful car audio brand in the world they pump out and sell tons and tons of cheap as shit to un aware folks, i will say boss stuff is fairly reliable but making a 200w gear hold up isnt hard. Unfortunately there are sooooo many people out there that have zero clue what there looking at and boss lies about the performance and rips em off. How they can legally do it i have no idea, i think a class action suit for boss maxxonics and epsilon is plausible that would stop there insane wattage lies but as long as people look the other way an say whatever itll continue to happen. At least the dyno videos proved there all lieing. I really like those double x subs nice looking driver, should do pretty good. Oh a super cool idea with that pain in the ass job of opening that sub hole up bobby gately took a flush trim bit and put a slightly smaller guide bearing on it so every pass it took a 1/16" off, then if needed you can take regular flush trim bit to match it up, ive never tried it but everytime Ive had to do it i wish i had dug my thumbs out n picked up a router bearing kit.
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Hey dude just wanted to thank you for being so nice to me and my brother at the gas station. We are both big fans and you have definitely taught me a lot through your videos. Car audio is my passion and I'm hoping one day I'll be able to do a big build like yours. Anyways you are a huge inspiration for me and I hope I'll be able to get a demo at some point. Keep doing what you're doing man. Also I'll be 18 in march and I'm hoping I'll be able to come to you for my tattoo:)
Was
Great to meet you guys also. If you need help with your build, you know where to find us
@@JerryAintloud I appreciate it jerry. I’ll definitely let y’all know if I need some help👍🏻
@@JerryAintloud you amazing
"If you get to a point where you're not learning anymore in the hobby you might as well quit." Damn right.
I'm learning with all of you guys in the bass community on UA-cam with every video. Thank you for the videos brother 👍
Keep it loud out there everyone 🔊🔊
That alt for an air cooled motor bit got me excited for a min😂
If the timing is perfect on my end, I would love for JAL & Duston to work on my build. I will definitely be in touch with you, gentlemen! 😮🔈
I love that about if you ever quit learning on a hobby... it is so true..
Damn it’s a shame you got fired. I liked your pricing and time frame
Procrastination my biggest enemy. Got a half wall in my truck box just sitting there wire hasn't been ran since I pulled it out. Been sanding truck for paint. Haven't touched in 3 weeks
Can’t wait to pick them up 💯 won’t see the booties in my build unfortunately so no issue
Beware that 1 sub is a whore
I hope you guys can find someone serious for a winter build, that would make a fun set of videos.
You all be having fun. That's a team and like family to keep up the video. I was hoping you all were coming to World Finals
The sanding and vacuum shot is tedious man,but hey its part of being a bass adict bro,suck it up buttercup lol😅
Love seeing this kind of shit man. Thanks for posting great content like this 💪🏻🔊💨
Autotech alternators should have one. I just got my 370 from them. Haven’t had a chance to put it on my armada.
Gotta put a roll on top of that port ! .and angle a board in back of the box ,,up top ,,behind the port ..
Will push it forward alot better! .
Hope this helps .
Good luck!
The ds18 pro-x8bm's would good nice with the color scheme of can't get right because they have the red bullets.
njce build,i need two 500 amp alternators for 2002 ford 150 because i run a 8 pill amp for cb ,it pulls alot
These subs are going to smash the lows! Just give them time to break in.
speaking of learning im soon to redesign my box based off some of your recommendations mostly because they make sense and my build is wrong right now cant you point me in the right direction on which videos you spill details
Dustin saves the day!!!👍🏾👍🏾
Always, me and him work great together
@@JerryAintloud You guys sure do. Didn’t mean to not incorporate you as you and his knowledge and wherewithal you all are sure to get positive results 👍🏾👍🏾
Shoot, if you could offer a 450amp alt for a 71 vw bug I would be keeping my bug😂
I didn't have good luck with one of my recones for my DS18 exl-xx12.4dhe. Other than that they are AMAZING subwoofers. The coils were fine after they blew. The soft parts are a different story. I guess that's what I get for playing 15hz on a 11k watt amplifier. 🤷🏽♂️
You can play 15hz on any size amp, it’s about matching that power to the sub, and proper enclosure. Ported box or bandpass ?
I’m really thinking of switching to ds18 in my semi not many bass semi trucks
I’m impressed with these subs
Love your videos sir. U make me go do upgrades on my system every time. My question is if you use diodes on an alternator to up voltage why get a higher output one
because you need amperage to maintain the voltage so when you ask the alternator to produce more voltage itll supply the same amperage but at the higher voltage only
Voltage is just voltage but amperage is how much current the alternator puts out. It’s the difference of filling a swimming pool with a straw vs. a fire hose
@JerryAintloud ok I get it now thank u
@@JerryAintloud great analogy
Last time I had the fitmenr problem I took a drill with a wire wheel around the hole until it just barely slides in, low speed, go around the hole like 3 times at medium speed then check the fit
But I don’t have a router
Put hyanka in the doors they got oro level 6.5 and 2 way 6.5 and 3 way 6 by 9s that take 200 watts a d they will send for free if u mame a video about it.
👍👍👍...
I knew something happened with g2. Pauls been mia on all media.
I did not know either, weird wonder why, oh well sucks.
I sent a 1200$ deaf bonce amp in for repair and never got it back 😑
@@1904audiohe tried me like that. I posted about it in every Facebook group I could find one morning before work. He called me and cashapped me my $ before 9am
Probably sitting in jail for ripping people off and I know I'm not the only one
@@1904audiowhattt!! When did you send it
60 bucks sign me up for the alt lol
Those look out of phase could be the camera though
as much as you r&r your subs i'm surprised you don't use t nuts and bolts.
They’re not practical with a triple layered baffle
🔊🔊🔊🔊
I don't think that the people that don't like DS18, have not ran DS18.
Jerry. You ought to try some Stevens Audio MB series mids. Theyre SQ speakers that get stupid loud. And play down low af
Hey Jerry would you guys be willing to sell Debbie’s old port?
This is definitely an option round don’t fit square hole 😂
@@debbie_aintloud lol last time I checked, that is indeed correct. I was looking to get a port from B.A.P but if I could save a lil that would be nice.. I live in VA so I could pick it up if necessary or I’m willing to pay for shipping..
If you pick up $60
I just checked and myrtle beach is actually a 5 hour drive from me, after gas there and back the trip would actually cost more then a new one, would you do $90 shipped? That should be more or less enough to cover shipping thru FEDEX or UPS
I think ds18 hate is not really justified, imo its from there budget line, there higher end stuff is really nice high performing gear but there budget entry level stuff has no rhyme or reason, im not saying its bad gear per se its just they obviously just pick n choose what the vendor has available and slap there name on it, its quite common in budget car audio products, then with there high end they obviously have imput on the design there not going to sell a turd as a flagship products and there high end is as solid as anything out there. They gotta keep the lights on and its hard only selling $1000 subs especially when the economy sucks. Thats why jacob started selling the E & LCS line there affordable and sell fast quick money, even aup n comming Jacob fanboy on a really tight budget can have that coveted genuine Sundown dust cap....could save some money n buy a sundown dust cap n some e6000 glue off ebay n slap it on that $30 Jensen sub from wally world lol. Theres a reason BOSS Group is the largest most successful car audio brand in the world they pump out and sell tons and tons of cheap as shit to un aware folks, i will say boss stuff is fairly reliable but making a 200w gear hold up isnt hard. Unfortunately there are sooooo many people out there that have zero clue what there looking at and boss lies about the performance and rips em off. How they can legally do it i have no idea, i think a class action suit for boss maxxonics and epsilon is plausible that would stop there insane wattage lies but as long as people look the other way an say whatever itll continue to happen. At least the dyno videos proved there all lieing. I really like those double x subs nice looking driver, should do pretty good. Oh a super cool idea with that pain in the ass job of opening that sub hole up bobby gately took a flush trim bit and put a slightly smaller guide bearing on it so every pass it took a 1/16" off, then if needed you can take regular flush trim bit to match it up, ive never tried it but everytime Ive had to do it i wish i had dug my thumbs out n picked up a router bearing kit.
So true DS18 has a wide variety of products for all budgets. The budget line will perform like budget equipment
Yooo 💪 🔊
You selling some 15s
I have 3 OEM Genesys 15s and 3 Synergy WFO 15s all good to go
I would fire you too!
😂
Makita & BUC KEES FOR THE WIN!! Never been to Buc Kees YET!! I want some of the Beaver Bark. JS ALTENATORS FOR THE WIN 🌐🔊🔊🐈 WORLDWIDE TEAM BASS CAT
Why do you keep deleting my comments?
I don’t delete anything
First!