Big Block 727 Torqueflite Mods to accept a Cope Racing Transmissions Trans brake manual valve body.
Вставка
- Опубліковано 5 вер 2024
- Oh my God, if John Cope were dead, he'd be spinning in his grave when he sees the meatball surgery, we perform on this poor 727, fortunately that's not the case, John is alive and well. Today we're going to try and show what it takes to install a Cope Racing Transmissions, Trans brake full manual reverse pattern valve body. I believe the part number we used was CRT-55X1, let's get into it.
Trans brake pass through connector instructions: • TRANS BRAKE PASS THROU...
CRT TRANS-BRAKE INSTALLATION INSTRUCTIONS: www.coperacing...
Special shout out and thanks to Jeff and Angie for the 1971 big block 727 Torqueflite core, thanks to Terry for the 66 core, we ended up not using (input shaft difference), and thanks to Andy for his machining skills on our front clutch pressure plate.
****************Do a guy a favor and hit the like button******************
If you think your friends would enjoy this content, feel free to hit the share button at the top of this description. Thank you very much.
We'll feature typical, at your own risk, repairs and upgrades for most Dodge, Plymouth, Duster, Dart, Barracuda, Cuda, fastback, notchback, convertible, Demon, Valiant, Signet, Dart Sport, a-body Mopar and so on, or maybe not. We focus on the years 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 and 1976. Questions? Leave us a comment below. We're here to help. Thanks for Watching.
FIND OUR MERCH HERE: www.etsy.com/s...
TO SHOW YOUR SUPPORT: Consider a membership.
FOLLOW US ON FACEBOOK: www.facebook.c...
SEND US STUFF:
BTP HQ
910 Walton Street
McGregor, IA 52157
0 9323 1971 727 tare down and mods for CRT parts
One step closer to Burnouts, Racetracks, and Regrets!! This should be a hard hitting transmission
It is 😁, thanks buddy.
Shes coming around nicely👊
WOO HOO!!
Always a Good Day when a new BTP sode Drops!!!
We appreciate you Raker, thanks.
@@79asspinYou're Welcome!!
Nice work guys.
Jaybo's Tranny Masters.
Alot of little but important modifications.
Done to Copes specifications.
But Bad Tree Style.
I like how you guys always have fun.
P.S.I watched this whole video! 🙂 👍👍
Thanks for sharing guys.
Take care, Ed.
Thanks Ed, we appreciate the kind words, take care.
The guy that wrapped that clutch ring 47 times watching Jay unwrap it...bahahahahaha
😆
Blake if you're carb has the power valve block thing . They only like wide open sometimes. . Like taking metering rods out of a Carter . Vacuum doesn't control fuel mix anymore. . Or distributor drive bushing .
Thanks Max, I believe we installed a 6.5 power valve in place of the plug, we may need to look at this again. We had a distributor bushing on it but I had it installed a little too tight, we'll look at that again also. Thanks again, take care.
71 road runner, If I remember right.
Yep, good unit, it's in the car right now, turned out great. Thanks Angie/Jeff. 👍👍👍
it's upside down..What's an Upside down 727? An
L9L!
👍👍👍
What causes the reverse band to break in the 727 had several thanks for the video
Wow several times in the same trans? Not really sure, maybe high idle but I doubt it. I'd give John Cope a call. Only time I've had that happen was on a 318 904 combo in a 68 Barracuda convertible, never abused the car but both reverse band lugs snaped right off.
@@79asspinnot same trans just about every 727 I have had in 77 warlock and 87 w 150
There is a guy in our town , he has a sign up that says " Black marks matter "....hmm !!!
I like it, I had a t-shirt that read Black Sabath Matters, it's a Jeremy hand me down now.
Will you have time to test and tune before no name?
Probably not
Maybe couple hits on the street somewhere, good luck guys great car👍
Why did you use a 12 roller sprag instead of a 16 roller sprag?
More pressure
How would it be more pressure?
@@BadTreeProductions
@@juneramsey5417 I read your comment wrong. Because it's the one I bought 😆
@@juneramsey5417 He thought you meant clutch retainer springs, we installed 15.