How to Use Punch Down Tool? (Only 8 Steps)|Detailed Instruction|Step by Step| VCELINK
Вставка
- Опубліковано 8 вер 2024
- In this short video, you will be introduced to how to use Punch Down Tool properly. Only eight steps, but each step is detailed and clear.
Related products:
🔥VCELINK Punch Down Tool Kit
👉bit.ly/3XugYLe
🔥Cat6 keystone jack:
👉bit.ly/4ba4BaC
🔥Punch Down Tool:
👉bit.ly/3xrt0KY
🔥Punch Down Stand:
👉bit.ly/4b8pNO1
🔥Mini Wire Stripper:
👉bit.ly/4evrszZ
--------------------------------Steps-------------------------------------
1. Pull down the neck collar on the tool
2. Cut off the outer of the ethernet cable
3. Clean plastic strip
4. Separate wires and make them straight
5. Place wires in the right orders
6. Insert wires into the plug
7. Punch down the impact tool
8. Put a cap on the plug and then connect the plug to a wall plate
Done!!!!!!!!!!!!!
FOLLOW US:
👉Facebook: / vcelinkofficial
👉Ins: / vcelink_official
👉Twitter: / vcelink
👉TikTok: / vcelinkofficial
Check out our shop!
► www.vcelink.com
#punchdown #ethernetcable #rj45 #punchdowntool #diy #network #keystonejack #VCELINK
If you have any questions or concerns, please feel free to make a comment below!
If you think it's a helpful tutorial, please LIKE and SUBSCRIBE to us!
😍Thanks for watching, see you next time!
▼What else is Worth Watching?▼
How to Install CAT6 pass-through connector？
• How to Install CAT6 pa...
How to Use Punch Down Tool?
• How to Use Punch Down ...
How To Terminate CAT 7 Category Cables？
• How To Terminate CAT 7...
The Most Detailed Brush Wall Plate Installation Tutorial |VCELINK
• The Most Detailed Brus...
How to Punch Down an RJ45 Cat6 Keystone Jack VCELINK?
• How to Punch Down a RJ...
That trick using the cable jacket to separate the wires was great. Thank you.
We are glad to be useful to you!
One of my old foremen told me people would say I was gay for using that trick, I don’t care and that dude was a tool. Especially nice for when doing rj45’s
Thanks a lot! Preping for my CompTIA a+ and this is very helpful
Wow, my pleasure to help with you☺
I Love this kind of real life demonstrations !!!! Thank you so much !!!
Thanks for your support😁We will strive to do better！
beautiful, cleared my doubts. The Cable jacket trick seems pretty handy as well.
Glad this video can help you!
Could you please enable closed captioning .. not everyone can hear well.. thanks
Thanks for your suggestion, we will try to do better in our future videos.
@@vcelink1671 thank you I appreciate it
thank you
Also thx for your support!
Thanks, very useful
Glad to be of help to you: ）
What is the point of changing the "High" and "Low" setting on it with the wheel? Is it the return force of the spring?
They are designed for different AWG Ethernet cables.
by the way, that plastic strip is for stripping off the plastic around the wires.
Without plastic strip, just with punch down tool will it work?
@@rollsroyce2876 probably. just thought i would mention it is all.
Can it no done without using plastic strip, just with punch down tool
If there is no wire stripper, you can use the rip cord and flush cutter to cut off the cable jacket. Or a pair of scissors will help, but I would like to suggest using a wire stripper to avoid damaging the wires.
wow so pretty
Thanks for the kind words. We always try our best!
isn't the yellow tool enough do insert the cable ? why is the punch tool after the yellow tool ?
Thanks for your comment. The yellow tool here is used to help insert the cable, but it will be a bit difficult to crimp the cable. You'd better use a professional punch-down tool to press the Ethernet cable and cut the excessive cable.
Puncher tool name which company ?
It's the punch-down tool from VCELINK. You can buy from www.vcelink.com/collections/punch-down-tool
Wow, this was pretty bad actually lol. I just bought your keystones and stumbled across this video, I almost bought the vertical cable ones and the faster punch tool but it was $100 more. Do you not make a faster tool for this?
We're always trying our best to improve our products and hope all of our customers can have an excellent shopping experience.☺
This is like the blind teaching the deaf how to see. I don't know that I've ever seen a video create so many unnecessary steps for a possible good connection.
We appreciated your feedback and we will try to do better in our future videos.
nice hands
No audio
hello, it does not have an audio but you can just follow the steps.
@@vcelink1671 this sucks the steps are white on a white background, just narrate next time
I'm sorry to make you feel uncomfortable during watching, we will try to improve next time, thank you for your suggestions
@@vcelink1671 no don't listen to that person it was very understandable without audio and you can see the letters fine. i like how clear this video was not many video can do that with out audio. it was perfect!
@@nothingxbutxpoison Thank you very much!