Studio Vlog #6 Stone Setting Jewelry | Claw Setting | Small Jewelry Business| AMR No Music
Вставка
- Опубліковано 1 чер 2023
- I am finishing up two rings in this video which consists of sanding, polishing and setting the stones! I also am sharing some stone setting advice and tips that I have learned along the way, especially for claw settings. I hope you learned something new from this jewelry studio vlog! Please let me know if you have any questions about jewelry making or have any video requests! 🥰💕
Please subscribe if you enjoy these videos and follow me on socials below 💕:
Instagram: miteramade?igsh...
TikTok: www.tiktok.com/@miteramade?is...
Website: www.miteramade.com
#jewelrybusiness #jewelrymaking #stonesettingprocess #jewelrydesigner #silversmithjewelry #handmadejewelry #jewelrylover #howitsmade #processvideo #smalljewelrybusiness #behindthescenes #studiovlog #asmrsounds #grainsetting #smallbusinessowner #clawsetting
Hello! Can you provide some tips on how to source gemstones for your pieces? I love watching your content and it has really motivated me to try something new 😊
Thank you so much 🥹💜 I can definitely make a video about it! 🙏🏻
@@MiteraMade I have that same question. Also, could you guide us to a metals supplier. I have looked on the internet and it is so confusing. I enjoy your videos and appreciate your hard work and dedication.😃
I'm so happy I found your channel, this is exactly the kind of stuff im interested in!!
Aw this makes me so happy, thank you! I’m glad you enjoy it! 🥰💜
Good luck with the move, I hope customs don’t have restrictions on caterpillars entering the country. I was thinking about it and I think I know what went wrong with your launch, because your so pretty and adorable the customers were too distracted to notice the jewellery. That must be it !
Another great Vlog
Thank you! 🙏🏻☺️
Great job, I too am Learning how to do jewelry making. Great video.
Thank you! The learning process never ends thats for sure 🙈💜
Such a cute doggo
잘보고 갑니다~~~~^^
I really recommend you wear a dust mask and safety glasses. Give it a try and blow your nose after polishing and you will know then. Nice work and nice video!
Edit: I wrote this before you even mention wearing masks later in the video, lol.
Thank you!! And thank you for looking out for my health!! 🥹💜 everyone on the internet will help me live longer 🙈💜💜💜 I will definitely be more mindful 💜
@@MiteraMade first time i used those radial discs i put them in reverse and on 35k rpm, in 10 seconds all the bristles came off and a bunch launched straight at my face!
Wonderful video
Thank you so much! 🥹
❤
Good 👍👍
Thank you ☺️
Instead of using the radial disk, you can use pumice disks which are a lot safer to use around your stones.
Thank you so much for that advice, I will look into getting some! 🙏🏻☺️
Have you looked into sending your bullion to the states. It may be easier selling it back to a bullion dealer in the UK and re-purchasing it in the US, once you are settled.
That’s a great idea! I’ve been so consumed with other things on my todo list, I forgot about all of my silver in my catch tray and in my drawers 🫢🙈
I call those "travel rings" when i make them for clients
That make’s perfect sense! ☺️💜 I never even thought of or heard of people doing that before making this one but it makes logical sense 🙈
Love watching your videos. Can you tell me what the black vice is called that you’re using to hold your ring in while you file it, thank you
Thank you so much! ☺️ it’s an encore vice by GRS tools 💜💜💜
when making thicker wire rings (like a 8gauge wire), how do you get rid of the line of where you solder? I feel like every time I solder the ring close, I still seem to see where I have solder. I am new to making rings, and sanding and polishing is what I find the most tricky! Do you have any tips and tricks..or even maybe a step by step of what I should do after I'm done soldering the ring closed? Thanks!
Hmm, I would say to make sure you ring is super flush and the joint is nice and tight before you solder for the cleanest joint after soldering. If you’re already doing that, I would say just don’t be scared to file away using a rough file, not a fine one. If the solder pulled all the way through to every side, once you sand and file enough it will go away 💜 do you have a half round file? I find that it made it so much easier with the inside of the ring to have a larger half round file. I hope this helps 💜
overlap the joints and saw.. file the edges. possible to use a mitre block to get an angle really well. if not a mitre block bring the edges together and re saw the cut. neat and tidy solder and plenty of flux. careful file and or sanding. you will be fine. remember to pickle after. and stamp, made in Sunderland on it
You're beautiful work 👌🌹💞❤️
Thank you so much 😊
@@MiteraMade ❤️
@@MiteraMade 🎶🎼 💍💍💍💞
Thank you very so much
I am interested in jewelry making very very so much
❤️
@@MiteraMade Thank you for your kindness🌹❤️💞💐
Great videos! I really wish you would wear eye protection, especially when polishing. It only takes one little piece of flying debris...
You’re so so right! I definitely will try and be more mindful 💜🙏🏻
Is that the Max Flame Pro Hand Torch?
I only know it as a Durston blow torch lol🤔🙈
@@MiteraMade thank you, Durston make them. I have ordered the new durston micro torch.
🤍🖤💎
You are a jewel 🌹👌😊
Thank you 💕