How To Solder - Two Methods - Both Are Right But Which One Is Best?
Вставка
- Опубліковано 10 жов 2024
- There are plenty of methods of soldering and all are right but there are ways to solder that are better than others. So which way is the best? Depends on the scenario. So in this situation which way is best?
Plenty of hints and tips to be learnt in this film. Don't forget to stick around for the bloopers.
#AtTheBench #JewelryMaking #soldering
THE EQUIPMENT I USE TO VLOG AND FILM
Epidemic Sounds www.epidemicso...
Canon 80D, Body; amzn.to/2Lfkdk7
Canon Lens 10-18mm; tinyurl.com/gnc...
Tripod for Canon; tinyurl.com/hdh...
Memory Cards; tinyurl.com/z8m...
Card Reader; tinyurl.com/z97...
Microphone, Cheap; tinyurl.com/hbx...
Microphone; tinyurl.com/zpj...
Canon G7X Camera; tinyurl.com/jkv...
Tripod for G7X; tinyurl.com/z27...
Mini Tripod; tinyurl.com/he9...
Mavic Drone; tinyurl.com/jfh...
360 Camera; tinyurl.com/jbm...
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website. - Навчання та стиль
Much better method. Excellent film. Thanks Andrew.
can never have enough soldering videos, it's something i'm struggling with, i've only just started smithing :) Thank you for your videos!
This is useful when you do a lot of weird shapes and can't clean it afterwards. Love the bloopers!
Bloopers are magic
Thanks love your videos. Very informative and helpful. ❤❤❤❤❤❤😊😊😊😊😊😊
Love the video proof, I've been trying to explain what I call solder ghosts. Solder is sentimental, it leaves it's ghost when it moves to its preferred location. Don't melt it any place you don't want ghosts! Like you, I dig soldering, always some fun to be had with hot stuff!
Thank you this was very helpful,
I am a newbie jewel maker, your video helping me lots. likes from India
I'm a techie just getting into this hobbies. One of my favorite things about electronics is soldering. In pcb soldering I tend to prefer this method as well, or at least a variant. We call it "tining".
Thanks to the inspiration I got from your videos 3 years ago I have learned so much and I'm still very interested in jewelry making and enjoy it as a hobby (albeit an expensive hobby - LOL!). With that said, your soldering videos have been most beneficial and gave me the confidence to try in the beginning; therefore, I often revisit them... especially after a rather lengthy hiatus. Thanks for sharing your knowledge and skills! 🙂
A bit of sellotape burnished up against the protective plastic coating and pulled sharply helps to remove the coating more easily
Andrew I'm super happy that you are pumping out videos super regularly again. Love it. Thank u
As am I.
Love this video! I wish I found this 1 week earlier when I was struggling with soldering an ear post!
So helpful! Thank you
Great. Thank you.
Thank you for this video it helped out a lot and saves a lot of work.
Thank you i love your Way .
Just tried this method today. Cleanest solder join ever. Thank you Andrew!
Bravo 👏 You should have been an engeneer. Amazing logic.
Thanks, Andrew! I always learn so much from your videos!
Informative and money saving. Cant beat it. Thanks andrew.
Thanks so much for this tip! I'm still trying to get the hang of soldering and escapee solder is one of my pet peeves! I'll be using this technique on my next project ☺
Ihre Methode ist wirklich toll alle Tips danke vielmals
Put the 'closed captions' on at 9:50 for a bit of fun !
Excellent video! I love the amount of detail here and the fact you're not talking a mile-a-minute to try and pump out a quick 2 minute video (which I have seen elsewhere and no they were not at all helpful...)
I'm just starting out and I'm loving your professional advice! 🤩 Keep your videos coming! Thumbs up!
Love the bloopers at the end- unfortunately for me that's how my entire silver soldering goes from beginning to end :) I noticed that you pickled the wire after melting the solder on to it and then re-melted it onto the plate- is that a necessary step? And if so why?
thank you for your videos, they teach many things to me!!!
thanks Andrew!
Have you read Jeanette K Caines Soldering Demystified? It's an interesting read. She uses solder balls amongst other things. Love how you said you're always learning.
Awesome thanks, it seems to me as someone who has done much brazing and silver soldering in a structural sense, don’t worry about clean up to much but still think of myself as capable of getting good results. However jewellery is much more visually demanding and therefore requires different techniques thanks heaps
Sounds good for adding decoration to your pieces
Love watching your videos really useful tips. I have learnt so much as an amateur jewellery maker. Thank you 😊
Very helpful ,have been doing it the first way lot of cleaning be trying second option makes sense thanks
What a difference. Thanks for the time saving tip.👍
Very good! Bloopers too!
Excellent explanation! and thank you very much
Love this!! I totally agree 100% !! I kinda figured this out along the way. It really does cut down on the clean up time. And I prefer the second one or the sweat soldering.
I use that technique alot and like it especially when afixing tube mounting posts on pre-enameled pieces......Question though....do you notice ever that the base metal adsorbs solder alloys on the surface making removal even more difficult? Also when sweating large Ag elements to copper or brass and using hard or medium solder, things get tricky....2 torches....very carefully..
all appreciated..thanks
Hi Andrew, not sure if you are gonna read this, I actually have successfully created some ear studs by watching your videos! I am wondering if you ever do gold plating if you do, can you please make a video? Thank you for all the great videos, I have learnt a great deal!
I will be giving this a try on my next solder job. Thanks for the tips and video.
a very nice tip, thanks a lot !
Thank you very Andrew much for this helpful tip!
Brilliant ❤
This is SO interesting! ☺
Thank you.💜👍👍
Thank you so much . Sir . Very useful
Hidey Ho Andrew, love these videos. Why do we do the wrong thing when struggling with soldering? As if that’s not bad enough, i insist on repeating the same failed attempt expecting it to magically work this i time
Would using a bit of wire solder work better as it would be just at the fine space between the wire and surface?
Another helpful tutorial Andrew, thanks. Question from a newb: Would this not be a case where wire solder is better than flat pallions? Bits of solder wire could be placed parallel to the ear wire and would flow right in as soon as conditions were hot enough?
You would need some extremely narrow solder wire if you want to avoid wasting large amounts of solder, but it definitely could create an extremely consistent joint.
Thank u sir. I really like the second attempt...the second pears stronger and neater. I’ve been looking at riches and would like ur opinion on which to buy. I’ve seen torches from butane to oxygen flame...so much advice out there...thank you ....
Hello Andrew! Thank you for your videos. Your attention to detail is wonderful. QUESTION. Where do you buy your borax cone? I love Rio, but I tried to use their cone and it just crumbles like stuck together salt cubes. I have to use a metal spoon to mash down the borax because when I gently try to use the cone, big chunks come off. Help! Thanks, mate.
Just curious on your thoughts...
In the electronics mfg business years and years ago... we tinned (or soldered) the wires first in a small solder pot before the wires were soldered to pc boards.
Wouldn’t this leave even less flow o your piece?
What is the acid you are using to soak the metal in after soldering?
Thank you Andrew! I thought sweat soldering meant something else entirely.
Oooh god thank you thank you thank you
With the second method, I was wondering why you don’t get oxidation of the wire just after the first solder? Shouldn’t be a must to pickle it before soldering again? I know it worked but why? Can someone explain how the flux is protecting twice the wire?
Thank you for super Tip
haha, thank you very much :)
I have a question. You are using borax and flux together, right? Is there a specific reason for that? I only used flux until now and I'm curious what does the borax does.
Hi. The borax is flux. We use it in its cone form and rub it with some water on an unglazed dish to make a paste
Hi Andrew
New to your channel, can I ask when you put a peace your working into acid "What acid is it" please.
William
xxoxxo @angelaksams : Thank you @andrewberryuk ! Very timely as I am soldering a bunch of earwires today! ;-)
I make me crazy with this.
I work with scrap material mostly making new from old. Any tips when using this type of material. No one gives tips on this type of work
The first one you pulled the heat off sooner. It looked like if you had heated it again it would have been just like the second.
The Mint, change you can eesr. Yikes!
Thank you for putting the "L" in solder.
What about balling the solder first? Same effect as first still?
Depends on which way the solder flows first
solder flows everywhere you put flux - if you put the borax not everywhere on the disc, but only on the places where you want solder, you can avoid the additional steps and have the same result.
Some people use flux as a fire scale preventative too
Sir how pure gold coin soldering pure gold strip please guide me.
The Mint, Coins you can wear. Bad typist.
Just watched your video. Great info. I make coin rings found your channel from Skylar on The Mibt Coins you can wear. If you choose me, I win a coin ring! Please, choose me!
You do alot of soldering