Great vid, just bought one of these buggy frames, I'm planning to use everything stock from my SCX10ii apart from the wheels and servo. Did you stick the esc and rx on the underside of the battery tray?
Could you just swap everything over from the 10.2 ? i have a bonestock RTR and id love to start off a build like this without having to replace electronics just yet
Yea pretty much, everything on this buggy came from a 10.2 kit. The only thing to make sure of is that you have a 3 piece front axle so that you can mount the servo to it, the mounts don't fit over the one piece truss, you'll have to find a mount that will fit around that
Longer shocks will give you more down travel if you're looking to flex out a little more, attaching them higher seems like it would negate having longer ones though. On this style buggy I prefer to have the wheels float over holes when I can instead of dropping into them. Running a "droop" setup with longer shocks might be alright unless you're just wanting crazy articulation, I'm no professional on suspension setup though. Sorry to ramble hope that answers your question somewhat
@@legitman99yolo76 so i repositioned my shocks and made my own links (stretched it a little) and it actually is probably one of the best chasis ive had (built 2 of them), but you gotta set up everything right. They also have a capra knock off that i just built that is really cool as well
Great Job man! love it!
I just got your comment and came here to check out the info. Thanks for sharing this!
Nice build ! 👍👍
Great vid, just bought one of these buggy frames, I'm planning to use everything stock from my SCX10ii apart from the wheels and servo. Did you stick the esc and rx on the underside of the battery tray?
@Chio_OB rx is under the front panel, esc is under the battery tray. Have fun with the build!
Just built one too but had ar60s so wider. So the links are opposite of how there Supposed to be but works good so far
Sweet!
Bad ass!!🔥🔥🔥💪💪💯👍👍👍
Good day 🙌👋 what battery length does the stock tray fit? 138-140mm? Thanks 👍🤘
Hi ! Very nice built ! what is the wheelbase ?
Thanks, its setup with an 11.4" wheelbase
@@andersonrc1286 thanks for the information! 👍
Last question: what is the hole to hole extended shocks dimension ?
@@matthieureims51 not sure I understand the question, which hole to hole?
you covered everything but what transmission you got in it
10.2 transmission
Could you just swap everything over from the 10.2 ? i have a bonestock RTR and id love to start off a build like this without having to replace electronics just yet
Yea pretty much, everything on this buggy came from a 10.2 kit. The only thing to make sure of is that you have a 3 piece front axle so that you can mount the servo to it, the mounts don't fit over the one piece truss, you'll have to find a mount that will fit around that
Would there be any advantage to getting longer shocks and attaching them to the higher holes on the buggy cage?
Longer shocks will give you more down travel if you're looking to flex out a little more, attaching them higher seems like it would negate having longer ones though. On this style buggy I prefer to have the wheels float over holes when I can instead of dropping into them. Running a "droop" setup with longer shocks might be alright unless you're just wanting crazy articulation, I'm no professional on suspension setup though. Sorry to ramble hope that answers your question somewhat
im running the hot racing 120 internals with a droop setup, sits super low, articulates well and floats when i need it too
Is a standard servo size ?
Yep, standard 1/10 servo
@@andersonrc1286 thank you
any bindage with the links ? Ive found the scx tranny plate likes to bind with the 4 link
I've got about 20 runs on this rig and haven't experienced any binding at all
Just put mine together and it binds too. Can’t get much flex at all
@@legitman99yolo76 so i repositioned my shocks and made my own links (stretched it a little) and it actually is probably one of the best chasis ive had (built 2 of them), but you gotta set up everything right. They also have a capra knock off that i just built that is really cool as well