How to Render VIRTUAL DRUMS into Separated Audio Tracks in CUBASE
Вставка
- Опубліковано 6 жов 2020
- #virtualdrums #cubase #mixdownonline
How to Render VIRTUAL DRUMS into Separated Audio Tracks in CUBASE
In today’s video, I break down 3 ways you can use in Cubase to Render Virtual Drums into Separated Tracks. One of these options is specifically related to Groove Agent 5 (SE).
►► Get access to the MIXDOWN ZONE for FREE and
get your FREE MIX CUBASE TEMPLATE and MULTITRACKS
mixdown.online/en/get-in-the-...
GET IN TOUCH WITH ME
►► Get FULL CONTROL over CUBASE with
THE ULTIMATE GUIDE TO CUBASE
theultimateguidetocubase.com
Instagram: / mixdownonline
Facebook: / mixdownonline
Twitter: / mixdownonline
Website: mixdown.online
►►Distrokid: Get Your Music On Apple Music, Spotify, Tidal (Get 7% OFF on your first year) →distrokid.com/vip/mixdown
Some of the gear and plugins I use in the studio:
►►WAVES PLUGINS Save 10% with the following link: www.waves.com/r/7vejtz
►►ACCUSONUS ERA-BUNDLE website accusonus.com/products/audio-...
►►THAT SOUND DRUM SAMPLES Save 10% with the following link:
bit.ly/2ugqCCp
DAW CONTROLLER: geni.us/vzjM
CAMERA geni.us/u2PLl
MICROPHONE geni.us/D9hDL
CAMERA MIC geni.us/nkB8z4e
LAVALIER MIC geni.us/lavalierMic
POP FILTER geni.us/8AnqW7A
STUDIO MONITORS geni.us/iiTMh2
HEADPHONES geni.us/cdABhtw
STEINBERG LICENCE KEY geni.us/a9Gcee5
CUBASE 10.5 geni.us/yWzl5fa
STUDIO MONITOR CONTROLLER geni.us/x7oDRh
STUDIO LIGHTS geni.us/yi8S5T
Related to this video, I received several questions about how to convert convert stereo audio to mono. I made a video on this topic a few months ago, enjoy :-) ua-cam.com/video/8SPH3_9aEMI/v-deo.html
Thank you Chris - my old method took ages - this is so much quicker.
I needed help to render multitrack of EZDrummer. Your vid helps a lot. Thank you !
I was stuck trying to figure out how to bounce out my custom kit in groove this has caused me great delight so thank you life saver as it’s not outlined anywhere else
This is why I use Cubase, It makes so much since
Absolutely brilliant video Chris!, many thanks!
Exporting my midi drums for mixing was a HUGE pain.Big fan of the channel. Thank you so much Chris.
Thank you Sir. It works for my Superior Drummer 3.
Excellent info, thank you!
Very good stuff to know👍 In 15 minutes! Excellent video Chris. Thanks again ✌
What a channel! thank you for every second of video 🙏🏽
Super clear thanks Chris, I always render to audio to reduce the load on my CPU, not sure if it really does but this will help my workflow. Thanks Nick
Very helpful. Thanks
Thank's Christian ! You do a great job ! It's always a pleasure listening from you. Stephan from Montreal 🎹
Thanks Stephan :-)
This. Was. Awesome! Thanks man!
thank you so much for giving for valuble class
I knew there was a way to do this. Great video. I really like the patterns in Grove Agent now I can separate them out into there separate channels. Plus I am discovering Cubase channel strip along the way.
Thanks for the tips. What is the Edison lightbulb on you desk for? Thanks.
Wow! That's amazing!
What is great about Groove Agent is that you don’t really need to render the drum channels into audio, except that the end of the project to archive it, because it already routes as many individual channels as you want to the mixer where are you can then put individual effects on them.
Thanks Chris! This is a video I've been looking for. I always do dissolve midi part, and then I have to go name everything blah blah blah. Thanks for the help.
This video was really helpful. Thank you so much Chris
You're welcome!
This is great Thanks Chris...I've been doing this the hard way [One of the many hard ways I have found ]
Glad to help
This Is great video! I must say that every video you do is super.👍
chris! amazing video man this is the stuff we need to know
Bonjour Chris! It's great to have a drummer explain this material. I've always used Battery. I would hand-play the drum parts, but I play too poorly. (It's my 4th instrument, and I'm still learning...) Thank-you for the valuable tips!
I am your big Fan, Chris. I always learn a lot from you
Thanks Chris for sharing always useful information on mixing in Cubase! This was really time saving and eye opening, instead of creating complicated input-output routing. 👍👍👍
My pleasure!
Great video like always!
hi mr chris selim just thank u for helping me alot god bless u.
Thank You for this video Chris!!
You're welcome!
Another great video Chris! I've been wondering how you separate tracks like this for a while and the dissolve function it is! It'd be great in MIDI instrument tracks to be able to do the same (i.e when you have a string part with 5-note chords and want to separate for individual strings, or maybe to transform a piano sketch into individual parts for getting started with some orchestration) though I guess this wouldn't be possible so easily, as there would be too many pitches in each part to use "separate pitches"... 🤔
This was so helpful!
Thank you ... very helpful !
Glad it was helpful!
Thank you Chris, I'm learning a lot just by watching your videos. This is great! Thank you.+
My pleasure!
Thanks SO much! You make it easy!
You are so welcome!
Two thumbs up!! Chris you always give a home run ⚾️ with your teaching. Chris can you please explain the real function of an Envelope Shaper?
Hello Chris, Really great video!! Thanks, May i ask is this only can use for Cubase pro and artist? I can not able to find that "render in place" section on Cubase elements 11?
Hi Chris! Very useful tutorial. I have a question: while doing rendering in place, if you select the mode "as separate events", what does it happen?
Very very helpful!! Thank you!!
You're welcome!
Super!!!!!! I been use Cubase for almost a year and did not thgis , thanks a lot!🙏🙏
You are welcome 😊
I’ve been creating drum audio tracks from Groove Agent a different way for many years, which works really well, but takes an extra few steps. I’m going to try your method out. Thanks mate
You're welcome friend!
Hi Chris, this was a super informative and great video. Thanks for sharing this!
Glad it was helpful!
Top video brother. I'm learning so much from your videos
Glad to help out my friend!
Thank you, sir! Very usefull!
You hope that was helpful? Well, even more than this! Thx so much for all of your professional tutorials :-)
Another excellent video Chris. I was particularly interested in the "Export mixer and FX to Cubase" function, I wasn't aware of this possibility.
Keep 'em coming. Thanks.
Glad it was helpful!
Thank you for all man, you're great man
I like your videos so much. Unfortunately we have no such perfect channel in german language, so I searched months ago and found you!
Thanks for all and for improving my knowledge of cubase and mixing.
Awesome! Glad you like my content :-)
Thank you very much for Information and knowledge ! Brother chris
My pleasure!
Genial, estaba buscando esta ayuda hace meses...no sabía como se hacía con batería acústica. Gracias por los excelentes aportes
de nada, mi amigo!
this is awesomely usefull!
really help rendering the drum program to audio in efficient way.. the stupid me has been exporting channel one by one like an old school outdated bummer..
all i need is just convert some channel to mono on kick, snare and hats... but that's a breeze.
thank you so much Chris! you are beyond AWESOME!!!
very grate i watch your very informative video!
Awesome, Thanks!
You are a amazing teacher ❤️❤️
Thank you! 😃
Thanks so much!
Chris, thank you for this video. I have been looking everywhere and cannot find an answer so I thought I would post it here. Is there a way to record the individual instrument notes from Groove Agent 5 SE patterns (not the MIDI notes that trigger the pattersn) when using the styles options? Thank you for your time!
I bought GA5 when it was on sale but never really used it lol... My go tos are SD3 for acoustics and Battery for electronics. Excellent video!
Thanks bro!
Hi Chris, thank you for these very informative videos! Please keep sending them out!
My question: I received a audio project with multiple audio tracks and I imported them into Cubase pro11. Now I want to sync all the tracks to a project tempo so I can add tracks like virtual drums, drum/bass loops etc. - that will be in sync with the audio. The audio tracks also need to be tightened up and corrected first I see how to sync audio with one track but what is the best workflow for multiple tracks?
Awesome Video! 🤘🤘🤘
Great stuff Chris.
Thanks 👍
Great video! I do have a question. I noticed in the video that the rendered audio tracks are in stereo. I would have thought they should be mono tracks. Is it better to have them in stereo? Thanks.
Do you hide, delete, deselect, or disable the output channels to clean up the mixer once you render to audio? And what if you want for example the kick to render or bounce to mono? Thanks for the great videos!
very helpful ... can we render in mono
Very usefull thanks ....
thank you for sharing knowledge
My pleasure
Thanks for the good info. But wouldnt it be better to have mono audio tracks for the drums? That would be more similar to real drum recording right?
Excellent!
Thanks for this! I'm going to be using fake drums for a while, so it's good to know better ways to handle them.
Quick question: How do you feel about reamping virtual drums via a keyboard amp or PA? It's something I wanted to experiment with, but I have a feeling that you probably already did this and know how it does and doesn't work.
Thanks again!
Great vid, that was a big help! Change virtual drums to WAV files was amazing learning! How can I do the opposite changing back the WAV files to virtual drums in case I want to change drum sounds or type? I’m guessing is simple but I’m new cubase user and trying to learn as I go? Thanks man
just excelent!
Hey thanks Chris...
I can only take in so much at a time but will be back for the second half
😃
Awesome!
Hi Chris, do you use virtual drum sets, and do you recommend any for working in tandem with Groove Agent?
Chris, is there a way to use separated midi events for each cell/pad using the same Groove Agent in track mode or do we need to go Rack mode and open several midi tracks?
Hi Chris, when I have more midi tracks for drums, should I bounce each track one by one?
hello, but why do you bounce the mono signals in a stere file. cant you already bounce it in mono? cheers great explinations what you do
Thank you!
Of course! Glad I could help!
Hi Chris,
Thanks for video.
I have a Question :
On Rendering the Virtual Drums process, in Options I "Muted Source Events", can I UNMUTE source (Virtual Drums) and HOW, cause I still need to do some adjustments with Virtual Drums?
Thanks in advance
🙂
Thanks Chris - very useful as always. I've been meaning to ask what to do with the original midi track after creating an audio track from it and you've answered that here :)
I save my project with another name and keep my MIDI Session as a backup. Then I remove all VSTi(s) from my current project before moving on
@@mixdownonline I'll add that to my routine. Thanks again Chris
Hello Chris! Thanks for the video as I recently often use groove agent, its very useful to me! Btw I have a question regarding editing audio files on timeline in Cubase. For example, I want the audio data to start or end at a specific timing on the bar (lets say 1.3 or 2.4), but automatically Cubase just selects either 1.0 or 2.0. I always have to adjust audio timing by using CTRL + mouse dragging. It's so painful when you have to do so multiple times. Is there any easier way to do this? (I'm not sure if I could explain this clearly and easy to understand sorry)
great tutorial !!!
Thank you!
Great video Chris !
For mixing don’t you need tracks at -12db
How can you do that ?
Chris - thanks for the video. I was wondering: I like to use a rack instance my Grove Agent, and after creating my single drum MIDI track, separate them into separate MIDI tracks via a drum map and the MIDI->Separate by Pitch function. I do this to preserve CPU /memory. My question here - can I apply audio vst effects like reverb, chorus, etc. to my MIDI tracks? - WITHOUT first bouncing them to audio?
谢谢！太有用了~
Hi Chris, great tutorial as normal. I have an issue with seeing midi drum channels in the mixer as well as HSSE channels and I don't know if I can delete them or not once I render to audio,
awesome back track recording BTW great quality . Thanks.
What I do is saving my MIDI session on it's own and "Save as" the bounced session on a new name and delete the MIDI Instruments on this new session. So this way I always have a back up of the MIDI session
Big Thanks Sir
Most welcome
My mind is blown.
Cubase needs to add the option of mono tracks in its vst output options - especially for drums
Totally Agree with you! there's a few lacks with Cubase on the Mono/Stereo Channel departement
Thank you 🙏
You’re welcome 😊
Great video as always...it would have saved me hours of work finding out myself months ago...it nearly drove me crazy rendering endless times until I got it right! ;-)
However...it would be nice if Steinberg improve the quick mixer export with the possibility to create audio files directly that way
Glad it helped! You can Export Multiple channels in Cubase Pro, it's limited but it works
Midi Render in place is not available on Elements? only on Artist and Producer?
Hi Chris, quick question. I also use to mix all me separate drum channels in Cubase (Pro 10.5). For that purpose my main VST drum is Addictive Drum 2. However, I’ve been using NI Studio Drummer and other NI drum VST’s lately and noticed that they have their own mixer and FX, separate for each kit piece. That mixer is essentially based on their own FX plugins that replicate the SSL fx. Question is : would their be any pro’s or con’s to use the plugin mixer + fx and only use the stereo feed to Cubase? That stereo feed could then be treated as a standard stereo drum buss. Don’tknow if that question could be of interest other subscribers to your channel. Thanks a lot for your videos and dedication. You are my « Cubase Master Jedi »! Et comme je suis de Québec je te le redis en français : merci mille fois.
Thanks for the video Chris, it´s been very helpful. I´ve been doing this for my Superior Drummer 3 Midi and it all gets dissolved onto plenty of tracks, I was just wondering if it would be acceptable to give my producer these tracks all in stereo as the midi dissolve seems to do automatically and if it is necessary to combine say some of the snare tracks onto one snare track, am I overthinking it or is it enough just to send the tracks exactly the way they are dissolved ? (of course with consolidations so the tracks are aligned in time).
I think it makes sense to just send them the way they are dissolved with consolidations. The producer can make group tracks and buses to get say different snare hits grouped. I wouldn´t waste time combining them onto one track even though it sounds simpler. A producer has many tools at his disposal to example resample drums (plugins like drumagog) but it sounds like you have been using the same principles by using different snare sounds in a performance. I doubt many composers do that, they just send the recordings to a producer and he has to polish the possible turd... unfortunately.
Chris, your videos are very very helpful and informative. Would request you to do an elaborate video on metering in cubase and how to read the different meters available in cubase and calibrate them
You're talking about the Channel Meter or the Control Room Meter?
@@mixdownonline Channel Meter
Just learned more in 15 minutes than I have in last 2 years.
Oh nice! Good to know :-). Happy to help!
Great video, thanks! Is there an easy way to convert MIDI to audio but in mono? For the kick, snare, hihat, etc.
Yes, if the VST Output is MONO, it will export in mono. To convert a Stereo to Mono file, I made a video on this a few months ago ;-) ua-cam.com/video/8SPH3_9aEMI/v-deo.html
Great tutorial! How about the open-close hi hat. I usually combine all HH's to one track when dissolve part(Same to the Tom's) because OHH have to be closed by F# HH. Anyway GREAT TUTORIAL!!! Thank you!
Problem many times why we can't replicate what you've shown: HOW did you record the MIDI or audio tracks from Groove Agent 5 on those 3 tracks 'before you dealt with the Outs'?
Chris you could also render the Midi to audio via the export option using the multi option, then selecting the export as mono option and then select the option to import the tracks back into the project.
Yes, that can work as well
Can the render option export the midi to mono as well? If im not want to use the export option..
Amazing 👋
Thanks 😁
This video is $$! Thanks
you're welcome!
Hi Chris, thanks a lot for the great videos! Just a quick question: Can we achieve the same result with Render in Place and exporting via Audio Mixdown (for those who do not have Cubase Pro and so don't have the Render in Place functionality)? Thank you!
Yes, absolutely. it might take a bit longer but the sound will be the same
@@mixdownonline Thank you!