Acme Bullet Review 45ACP 230 gr RN-NLG & 200 gr SWC-NLG

This is a review of a new reloading bullet I came across by Acme bullet company. The two bullets are 45 ACP 200 Grains LSWC NLG and 230 Grain RN NLG. I used 5 grains of Clean Shot Powder and once fired PPU cases with CCI Large Pistol Primer loaded on a Lee single stage press. This is a full review to include Chrono graph and accuracy testing check it out and let me know what you think

[@madewithscraps]

Very nice pistol build. I think you just demonstrated what I have found in comparing powder coated to jacketed bullets when chrono graphing. I find all calibers of cast coated to be 35-85 fps faster than jacketed or plated, plus additional accuracy. This shows me that fact due to less friction. I am actually able to back off my powder charge by 1/10-2/1oths less powder to achieve the same velocity as jacketed. I find no fouling in the barrel. I eliminated the lube groove in one mold and noticed 3-5 fps increase in accuracy, plus 10% increase of accuracy. The initial use of Acme coated bullets converted me to cast and coat my own bullets for 38-9mm-45acp. Thanks again for the informative video.

[@Newtire]

They sure make some pretty bullets. They shoot like a house on fire. Used their .357 SWC, .45 200 gr. RNFP and 225 gr. RNFP. All great bullets.

[@georgekopsias9159]

Thank you for the great detail you put into this test. It was very helpful.

[@IEraiderfan]

Nice video a very good comparison I am going to have to try out Acme Bullets thank you, keep the videos coming.👍👍👍

[@ginogomez5401]

Great video...thank. you for the load data. I too have Clean Shot and am still up in the air about it. I thought I really liked it, I mean...it's decent. But, compared to some of the others in 45 acp like Clays, Bullseys, and Titegroup and even W-231 it takes a back seat. I really like Clays right now. Again...great video.

[@allthingsarcheryandshootin9380]

Thank you for watching my video I have another series coming out with 9mm be sure to look for it soon thanks again for the support

[@Ruteger100]

where can i find load data for those bullets?

[@crunkdaddy11]

They are just lead bullets. Use the same as any lead data.

[@TheEddieBear]

Thanks for the video! Just got some Acme 45 ACP 200 Grains LSWC and 230 RN . May I ask what overall cartridge length you seated them to?

[@allthingsarcheryandshootin9380]

I load them to 1.255

[@TheEddieBear]

@@allthingsarcheryandshootin9380 Thanks!