KAWASAKI VULCAN FUELPUMP REPAIR EASY..? The Old Mechanic shows you how YOU can do it YOURSELF.

In this video I am going to show you how easy it is to 'repair' your FUEL-PUMP.
Keep an eye on my playlist about THIS KAWASAKI VULCAN and see how
I solved that mess..:
• KAWASAKI VULCAN [1988]...
If you want to support my channel, so I can make more of these maintenance video's for you,
please push the --- ♥️ THANKS -- button below. Any amound is more then welcome.
Motorcycle Maintenance For Beginners - AND What You Need To Know
With this DO IT YOURSELF video you can save a lot of money.
So be sure to watch this WHOLE video, so you don't mis important information.
Don't forget to SUBSCRIBE, LIKE and SHARE this video with your all your friends on FaceBook and WhatsApp.
Motorcycle maintenance made easy by: The Old Mechanic
#TheOldMechanic #motorcyclemaintenance #KawasakiVulcan

[@FREE_PUREBLOOD333]

Lovely looking motorcycle after all these years.

[@TheOldMechanic]

Absolute 👍🏻

[@doreenduncan3411]

Thank you for a very informative video. I thought a fuel pump had to replaced and not able to be repaired. A fuel pump for my 2000 Vulcan Nomad 1500G is $350!

[@TheOldMechanic]

You are welcome! 👊🏻👍🏻😭

[@Mr_beats281]

same

[@godgunzndrumz]

Thanks for posting these VN1500 Vidz. My Gal Val a 99 Model says thank you.

[@TheOldMechanic]

Glad you like them! 👍🏻👊🏻

[@paulgrindley8192]

Thank you so much for this video. I am currently resurrecting my 1999 Vulcan identical to the one in your video. I love that modification and intend to do this tomorrow. Seems like it would be a much better idea for Kawasaki to have it like your modification. Would save lots of wear and tear on the starter. Again, thank you.

[@markariewilliams]

Excellent tutorial thank you, i have a ktm 950 adventure and will be carrying spare contact points and hobby small soldering kit with me now, much smaller and lighter than a fuel pump, much cheaper too A++++

[@TheOldMechanic]

Sounds great!

[@randyburgos]

Great video as always.
Randy

[@wilianeliseochoquemamani768]

1 What type of fuel pump did you use?
2 How many "psi" is the fuel pump that you put on the motorcycle? thank you.

[@federicodonato9465]

Amazing masterclass, i'm having thoubles with mine (honda pc800) same pump. 2 questions:
1 where did you get the spare part?
2 why first time you set ignition the pump sounds but the second time no?

[@TheOldMechanic]

I will look the part up for you 😉

[@TheOldMechanic]

I used the: Tourmax FPS-900. For your 2e question, when the carburators are filled, the pump 'stops' pumping. When the engine is running the pump keep the carburators filled by a pump every few seconds

[@andreap.2661]

The original circuit designed by kawasaki prevents the fuel spillage in case of motorcycle fall. With your modification the fuel will be pumped even if the engine will stop after falling down.

[@TheOldMechanic]

Hi, nope even in the old situation, if the bike falls, and the engine keeps running the pump keeps working as the bike has no sensor to detect if the bike is on its side, on the ground. 😉

[@andreap.2661]

I assume the Vulcan is fed by carburetors like my ZZR 1200. The engine cannot keep running with horizontal motorcycle, just because the carburetors bowls would empty despite the fuel pumps.
Both main and needle jets will not get the fuel and the engine will stop in few seconds. You will experience just the spillage of the fuel which was present in the carb. bowls.

[@TheOldMechanic]

@@andreap.2661 So my mod don't change that 😉

[@Mr_beats281]

thank you

[@TheOldMechanic]

You're welcome

[@Mr_beats281]

@@TheOldMechanic the part came. Today it works spot on you just saved me 300 pound 💷 thanks again

[@leonarellano2539]

I have a Vmax 1200 that uses a very similar fuel pump. It seems to be working, but it is leaking gas when the bike is on. I removed the pump and tightened the screws but the leak didn't stop. Do these pumps have seals that I can change? Thank you in advance

[@jdlinser]

Question can you show the modification you did to the fuel pump to let it run with key not with crank. i have a fuel pump issue and know someone did that mod. i need to know how to make sure the mod is still working. can you help me

[@eduardoarevalo4547]

Como se llama la pieza de recambio

[@boerbert5335]

Wil je het mij eens uitleggen hoe je dat hebt gedaan om de brandstofpomp te laten pompen terwijl de motor alleen op contact staat?

[@wilianeliseochoquemamani768]

How many "psi" is the fuel pump that you put on the motorcycle? thank you.

[@TheOldMechanic]

I don't.. but its enough 😉

[@bccapone837]

How did you do the fuel pump mod to activate by key , I want to do that

[@TheOldMechanic]

Send me an email 😉

[@johngeorgiades6959]

​@@TheOldMechanicHi. Great job and lovely bike. I am also interested to do that mod on my Kawasaki ZX1100(ZZR-1100 C3). Can you please tell me which 2 wires should i connect together on the fuel pump relay? Thank you in advance

[@gusyak3446]

Por quecambio el fuel pump. Mi vulcan900 se ahoga cuando acelero. Ya cambie bujieas. Filter de aire y sigue igual..
Sera el fuel pump?

[@AndreasVZ]

Si le modificaste el filtro de aire muy probablemente sea ello.

[@AdamEverythingRC]

do you have the part number for that part ? and where to get it?

[@RYEMAN101]

Did you ever find one?

[@AdamEverythingRC]

@@RYEMAN101 yes

[@juansolo2t]

You dont repar it. You only changed pieces.

[@AndreasVZ]

That sounds like it fits into a repairing procedure to me

[@francisgiles8623]

Too much yapping
Just get to it already

[@Gravity222]

Horosho!!!!❤👍💯very good !

[@TheOldMechanic]

Thanks 👍🏻👊🏻🏍

[@craigleestiff8775]

Hi could you please tell me where you got the part for fuel pump