Dan thanks for the video I was wandering if you can show or tell me how to measure my wheels for lug pattern i have a 1998 grand cherokee laredo 15 inch wheels please and thank you stay safe my friend
@@rickysmith8099 You might be tempted to run some Ford Ranger wheels which have the same bolt pattern. The problem you will run into if they are the stock steel Ranger wheels. The center hole is Really a tight fit. And if you have to take them off it will be a rough job. Please don't ask me how I found out about this after I bought 4 stock steel Ranger wheels and two tone painted them. I took a carbide bit and removed just a little bit and now they fit fine. I have a 1996 Jeep Grand Cherokee Limited that came with IMO gosh awful snowflake 16 inch wheels.
Thank you for this video!!!.. I’ve been searching for years for a video on how to take my interior out so I could swap it for black too.. I’m also going to change my headliner
Is there a way to take out middle row seats without the full extent tumble. Mine won’t go all the way even pulling the back strap. My other commander gave me no problems?
Ironically after filming this video I realized I forgot to plug in the rear seat heaters.. tried to flip em open and the passenger side one broke! It won't flip completely open now.. gonna be looking to find a fix and I'll film it when I do! Stay posted 💪
@@ProjectDanH I would realllyyyyy appreciate it if u filmed a fix😂 good luck with it lol. Can’t be harder than that headliner I commented about a month ago. Was able to get why out and painted btw👍
Bro please send me a front set of fender flairs. Im way up in alaska and cant find any here 😅 you can even cut them in half for shipping and ill plastic weld them back together.
Hey there. I have the same overland package in my 08. Would you be willing to to sell me the drivers seat or at least the seat covers. My seat started deteriorating soon after I got it in 2018.
Let the Deconstruction Begin!!!! Hope you guys Enjoy!
Nice job Brother.I can't believe nothing broke...
You and me both!
What a job that is!! How many Commander interiors have you swapped like this? Looking forward to part 2!
Too many Brother.. too many
Great job Dan !! Its going to look sooo good with the black interior . Looking forward to your part two video. Take care
Thanks brother It looks amazing
Just put a block under the jack and it will work.
Yeah. That'll work!
Dan thanks for the video I was wandering if you can show or tell me how to measure my wheels for lug pattern i have a 1998 grand cherokee laredo 15 inch wheels please and thank you stay safe my friend
My pleasure buddy, XJ ZJ and TJ are all 5x4.5
Thanks you sir @ProjectDanH
@@rickysmith8099 You might be tempted to run some Ford Ranger wheels which have the same bolt pattern. The problem you will run into if they are the stock steel Ranger wheels. The center hole is Really a tight fit. And if you have to take them off it will be a rough job. Please don't ask me how I found out about this after I bought 4 stock steel Ranger wheels and two tone painted them. I took a carbide bit and removed just a little bit and now they fit fine. I have a 1996 Jeep Grand Cherokee Limited that came with IMO gosh awful snowflake 16 inch wheels.
@lilorbielilorbie2496 thanks for the info stay safe my friend
@@rickysmith8099 You do the same.
I have a 98 zj 5.2, my vacuum line for accessories broke right at firewall. Any suggestions on how or where to run new one? Great vid as usual.
Thanks man.. not sure how deep your crack goes. Sometimes they're a pain to get to
@@ProjectDanH Hard line broke a 1/2 inch inside firewall right next to AC lines. Gotta love a Jeep .
Thank you for this video!!!.. I’ve been searching for years for a video on how to take my interior out so I could swap it for black too.. I’m also going to change my headliner
Same thing I'm doing to my ZJ
Excellent!
Nice, a lot of work. what happen to the other jeep , I got lost a long the way. lol
Sorry man.. I have a big fleet. They've not linear timelines... They overlap alot
Hay Dan didn't you say you where going to vacuum the carpet before you lifted it out.
Dan you're the man
Thanks for all the videos
Hey do those seats fit in a 99 grand cherokee Laredo
I vacuumed too much. It's just kind of boring to film vacuuming
@@edwinpagan4705 not likely, perhaps you can mod the seats to fit the WJ base
are the commanders good jeeps? heard different ideas about them.
I love my commander, but like every vehicle they have their quirks
Was video # 5 the last toad j ?
More toad coming
Is there a way to take out middle row seats without the full extent tumble. Mine won’t go all the way even pulling the back strap. My other commander gave me no problems?
Ironically after filming this video I realized I forgot to plug in the rear seat heaters.. tried to flip em open and the passenger side one broke! It won't flip completely open now.. gonna be looking to find a fix and I'll film it when I do! Stay posted 💪
@@ProjectDanH I would realllyyyyy appreciate it if u filmed a fix😂 good luck with it lol. Can’t be harder than that headliner I commented about a month ago. Was able to get why out and painted btw👍
@@M1nep1ece Awesome!!! Great news!!! ill see what I can do with these stupid seats. lol
Find my roach clip?
Probably!
Bro please send me a front set of fender flairs. Im way up in alaska and cant find any here 😅 you can even cut them in half for shipping and ill plastic weld them back together.
🤣 for real? Hit me up on Instagram and we'll talk
@@ProjectDanH I don't have insta, just facebook, but I will littery make an account right now!😂
@@ProjectDanHsent!!!
Hey there. I have the same overland package in my 08. Would you be willing to to sell me the drivers seat or at least the seat covers. My seat started deteriorating soon after I got it in 2018.
the driver seat is starting to tatter, your best best is to use a passenger seat pad on the drivers side
Makes sense to me. Would you be willing to sell the passenger pad to me? If so how much. Muck lave man. Been watching your adventures for a while now.
Maybe can make it work with a couple of 2X6 blocks of wood 🪵
Not a bad idea